X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fnet%2Figb%2Fe1000_82575.c;h=b60daf43cf27da3c69f51e88566cb20f8c10ddcb;hb=cc9073bbc901a0b695c9c5966d65520c29af70af;hp=6158c0f3b2051f4768649a3d09fed9ebc017bb30;hpb=3aee0605a41399063c0ad396f1f4267108f210d3;p=pandora-kernel.git diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index 6158c0f3b205..b60daf43cf27 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -49,11 +49,10 @@ static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *); static s32 igb_reset_hw_82575(struct e1000_hw *); static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *, bool); static s32 igb_setup_copper_link_82575(struct e1000_hw *); -static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *); +static s32 igb_setup_serdes_link_82575(struct e1000_hw *); static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16); static void igb_clear_hw_cntrs_82575(struct e1000_hw *); static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *, u16); -static void igb_configure_pcs_link_82575(struct e1000_hw *); static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *, u16 *, u16 *); static s32 igb_get_phy_id_82575(struct e1000_hw *); @@ -105,16 +104,20 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) dev_spec->sgmii_active = false; ctrl_ext = rd32(E1000_CTRL_EXT); - if ((ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) == - E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES) { - hw->phy.media_type = e1000_media_type_internal_serdes; - ctrl_ext |= E1000_CTRL_I2C_ENA; - } else if (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_SGMII) { + switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) { + case E1000_CTRL_EXT_LINK_MODE_SGMII: dev_spec->sgmii_active = true; ctrl_ext |= E1000_CTRL_I2C_ENA; - } else { + break; + case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES: + hw->phy.media_type = e1000_media_type_internal_serdes; + ctrl_ext |= E1000_CTRL_I2C_ENA; + break; + default: ctrl_ext &= ~E1000_CTRL_I2C_ENA; + break; } + wr32(E1000_CTRL_EXT, ctrl_ext); /* Set mta register count */ @@ -134,7 +137,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) mac->ops.setup_physical_interface = (hw->phy.media_type == e1000_media_type_copper) ? igb_setup_copper_link_82575 - : igb_setup_fiber_serdes_link_82575; + : igb_setup_serdes_link_82575; /* NVM initialization */ eecd = rd32(E1000_EECD); @@ -379,6 +382,7 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw) struct e1000_phy_info *phy = &hw->phy; s32 ret_val = 0; u16 phy_id; + u32 ctrl_ext; /* * For SGMII PHYs, we try the list of possible addresses until @@ -393,6 +397,12 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw) goto out; } + /* Power on sgmii phy if it is disabled */ + ctrl_ext = rd32(E1000_CTRL_EXT); + wr32(E1000_CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA); + wrfl(); + msleep(300); + /* * The address field in the I2CCMD register is 3 bits and 0 is invalid. * Therefore, we need to test 1-7 @@ -418,9 +428,12 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw) phy->addr = 0; ret_val = -E1000_ERR_PHY; goto out; + } else { + ret_val = igb_get_phy_id(hw); } - ret_val = igb_get_phy_id(hw); + /* restore previous sfp cage power state */ + wr32(E1000_CTRL_EXT, ctrl_ext); out: return ret_val; @@ -766,17 +779,18 @@ static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed, } /** - * igb_shutdown_fiber_serdes_link_82575 - Remove link during power down + * igb_shutdown_serdes_link_82575 - Remove link during power down * @hw: pointer to the HW structure * * In the case of fiber serdes, shut down optics and PCS on driver unload * when management pass thru is not enabled. **/ -void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw) +void igb_shutdown_serdes_link_82575(struct e1000_hw *hw) { u32 reg; - if (hw->phy.media_type != e1000_media_type_internal_serdes) + if (hw->phy.media_type != e1000_media_type_internal_serdes || + igb_sgmii_active_82575(hw)) return; /* if the management interface is not enabled, then power down */ @@ -788,7 +802,7 @@ void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw) /* shutdown the laser */ reg = rd32(E1000_CTRL_EXT); - reg |= E1000_CTRL_EXT_SDP7_DATA; + reg |= E1000_CTRL_EXT_SDP3_DATA; wr32(E1000_CTRL_EXT, reg); /* flush the write to verify completion */ @@ -927,6 +941,17 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); wr32(E1000_CTRL, ctrl); + ret_val = igb_setup_serdes_link_82575(hw); + if (ret_val) + goto out; + + if (igb_sgmii_active_82575(hw) && !hw->phy.reset_disable) { + ret_val = hw->phy.ops.reset(hw); + if (ret_val) { + hw_dbg("Error resetting the PHY.\n"); + goto out; + } + } switch (hw->phy.type) { case e1000_phy_m88: ret_val = igb_copper_link_setup_m88(hw); @@ -963,8 +988,6 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) } } - igb_configure_pcs_link_82575(hw); - /* * Check link status. Wait up to 100 microseconds for link to become * valid. @@ -987,14 +1010,18 @@ out: } /** - * igb_setup_fiber_serdes_link_82575 - Setup link for fiber/serdes + * igb_setup_serdes_link_82575 - Setup link for fiber/serdes * @hw: pointer to the HW structure * * Configures speed and duplex for fiber and serdes links. **/ -static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw) +static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) { - u32 reg; + u32 ctrl_reg, reg; + + if ((hw->phy.media_type != e1000_media_type_internal_serdes) && + !igb_sgmii_active_82575(hw)) + return 0; /* * On the 82575, SerDes loopback mode persists until it is @@ -1004,26 +1031,38 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw) */ wr32(E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK); - /* Force link up, set 1gb, set both sw defined pins */ - reg = rd32(E1000_CTRL); - reg |= E1000_CTRL_SLU | - E1000_CTRL_SPD_1000 | - E1000_CTRL_FRCSPD | - E1000_CTRL_SWDPIN0 | - E1000_CTRL_SWDPIN1; - wr32(E1000_CTRL, reg); - - /* Power on phy for 82576 fiber adapters */ - if (hw->mac.type == e1000_82576) { - reg = rd32(E1000_CTRL_EXT); - reg &= ~E1000_CTRL_EXT_SDP7_DATA; - wr32(E1000_CTRL_EXT, reg); + /* power on the sfp cage if present */ + reg = rd32(E1000_CTRL_EXT); + reg &= ~E1000_CTRL_EXT_SDP3_DATA; + wr32(E1000_CTRL_EXT, reg); + + ctrl_reg = rd32(E1000_CTRL); + ctrl_reg |= E1000_CTRL_SLU; + + if (hw->mac.type == e1000_82575 || hw->mac.type == e1000_82576) { + /* set both sw defined pins */ + ctrl_reg |= E1000_CTRL_SWDPIN0 | E1000_CTRL_SWDPIN1; + + /* Set switch control to serdes energy detect */ + reg = rd32(E1000_CONNSW); + reg |= E1000_CONNSW_ENRGSRC; + wr32(E1000_CONNSW, reg); + } + + reg = rd32(E1000_PCS_LCTL); + + if (igb_sgmii_active_82575(hw)) { + /* allow time for SFP cage to power up phy */ + msleep(300); + + /* AN time out should be disabled for SGMII mode */ + reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT); + } else { + ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD | + E1000_CTRL_FD | E1000_CTRL_FRCDPX; } - /* Set switch control to serdes energy detect */ - reg = rd32(E1000_CONNSW); - reg |= E1000_CONNSW_ENRGSRC; - wr32(E1000_CONNSW, reg); + wr32(E1000_CTRL, ctrl_reg); /* * New SerDes mode allows for forcing speed or autonegotiating speed @@ -1031,12 +1070,21 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw) * mode that will be compatible with older link partners and switches. * However, both are supported by the hardware and some drivers/tools. */ - reg = rd32(E1000_PCS_LCTL); reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP | E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK); - if (hw->mac.autoneg) { + /* + * We force flow control to prevent the CTRL register values from being + * overwritten by the autonegotiated flow control values + */ + reg |= E1000_PCS_LCTL_FORCE_FCTRL; + + /* + * we always set sgmii to autoneg since it is the phy that will be + * forcing the link and the serdes is just a go-between + */ + if (hw->mac.autoneg || igb_sgmii_active_82575(hw)) { /* Set PCS register for autoneg */ reg |= E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */ E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */ @@ -1053,75 +1101,12 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw) hw_dbg("Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg); } - if (hw->mac.type == e1000_82576) { - reg |= E1000_PCS_LCTL_FORCE_FCTRL; - igb_force_mac_fc(hw); - } - wr32(E1000_PCS_LCTL, reg); - return 0; -} - -/** - * igb_configure_pcs_link_82575 - Configure PCS link - * @hw: pointer to the HW structure - * - * Configure the physical coding sub-layer (PCS) link. The PCS link is - * only used on copper connections where the serialized gigabit media - * independent interface (sgmii) is being used. Configures the link - * for auto-negotiation or forces speed/duplex. - **/ -static void igb_configure_pcs_link_82575(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - u32 reg = 0; - - if (hw->phy.media_type != e1000_media_type_copper || - !(igb_sgmii_active_82575(hw))) - return; - - /* For SGMII, we need to issue a PCS autoneg restart */ - reg = rd32(E1000_PCS_LCTL); - - /* AN time out should be disabled for SGMII mode */ - reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT); - - if (mac->autoneg) { - /* Make sure forced speed and force link are not set */ - reg &= ~(E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK); - - /* - * The PHY should be setup prior to calling this function. - * All we need to do is restart autoneg and enable autoneg. - */ - reg |= E1000_PCS_LCTL_AN_RESTART | E1000_PCS_LCTL_AN_ENABLE; - } else { - /* Set PCS register for forced speed */ - - /* Turn off bits for full duplex, speed, and autoneg */ - reg &= ~(E1000_PCS_LCTL_FSV_1000 | - E1000_PCS_LCTL_FSV_100 | - E1000_PCS_LCTL_FDV_FULL | - E1000_PCS_LCTL_AN_ENABLE); - - /* Check for duplex first */ - if (mac->forced_speed_duplex & E1000_ALL_FULL_DUPLEX) - reg |= E1000_PCS_LCTL_FDV_FULL; - - /* Now set speed */ - if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) - reg |= E1000_PCS_LCTL_FSV_100; - - /* Force speed and force link */ - reg |= E1000_PCS_LCTL_FSD | - E1000_PCS_LCTL_FORCE_LINK | - E1000_PCS_LCTL_FLV_LINK_UP; + if (!igb_sgmii_active_82575(hw)) + igb_force_mac_fc(hw); - hw_dbg("Wrote 0x%08X to PCS_LCTL to configure forced link\n", - reg); - } - wr32(E1000_PCS_LCTL, reg); + return 0; } /** @@ -1196,60 +1181,59 @@ static s32 igb_read_mac_addr_82575(struct e1000_hw *hw) **/ static void igb_clear_hw_cntrs_82575(struct e1000_hw *hw) { - u32 temp; - igb_clear_hw_cntrs_base(hw); - temp = rd32(E1000_PRC64); - temp = rd32(E1000_PRC127); - temp = rd32(E1000_PRC255); - temp = rd32(E1000_PRC511); - temp = rd32(E1000_PRC1023); - temp = rd32(E1000_PRC1522); - temp = rd32(E1000_PTC64); - temp = rd32(E1000_PTC127); - temp = rd32(E1000_PTC255); - temp = rd32(E1000_PTC511); - temp = rd32(E1000_PTC1023); - temp = rd32(E1000_PTC1522); - - temp = rd32(E1000_ALGNERRC); - temp = rd32(E1000_RXERRC); - temp = rd32(E1000_TNCRS); - temp = rd32(E1000_CEXTERR); - temp = rd32(E1000_TSCTC); - temp = rd32(E1000_TSCTFC); - - temp = rd32(E1000_MGTPRC); - temp = rd32(E1000_MGTPDC); - temp = rd32(E1000_MGTPTC); - - temp = rd32(E1000_IAC); - temp = rd32(E1000_ICRXOC); - - temp = rd32(E1000_ICRXPTC); - temp = rd32(E1000_ICRXATC); - temp = rd32(E1000_ICTXPTC); - temp = rd32(E1000_ICTXATC); - temp = rd32(E1000_ICTXQEC); - temp = rd32(E1000_ICTXQMTC); - temp = rd32(E1000_ICRXDMTC); - - temp = rd32(E1000_CBTMPC); - temp = rd32(E1000_HTDPMC); - temp = rd32(E1000_CBRMPC); - temp = rd32(E1000_RPTHC); - temp = rd32(E1000_HGPTC); - temp = rd32(E1000_HTCBDPC); - temp = rd32(E1000_HGORCL); - temp = rd32(E1000_HGORCH); - temp = rd32(E1000_HGOTCL); - temp = rd32(E1000_HGOTCH); - temp = rd32(E1000_LENERRS); + rd32(E1000_PRC64); + rd32(E1000_PRC127); + rd32(E1000_PRC255); + rd32(E1000_PRC511); + rd32(E1000_PRC1023); + rd32(E1000_PRC1522); + rd32(E1000_PTC64); + rd32(E1000_PTC127); + rd32(E1000_PTC255); + rd32(E1000_PTC511); + rd32(E1000_PTC1023); + rd32(E1000_PTC1522); + + rd32(E1000_ALGNERRC); + rd32(E1000_RXERRC); + rd32(E1000_TNCRS); + rd32(E1000_CEXTERR); + rd32(E1000_TSCTC); + rd32(E1000_TSCTFC); + + rd32(E1000_MGTPRC); + rd32(E1000_MGTPDC); + rd32(E1000_MGTPTC); + + rd32(E1000_IAC); + rd32(E1000_ICRXOC); + + rd32(E1000_ICRXPTC); + rd32(E1000_ICRXATC); + rd32(E1000_ICTXPTC); + rd32(E1000_ICTXATC); + rd32(E1000_ICTXQEC); + rd32(E1000_ICTXQMTC); + rd32(E1000_ICRXDMTC); + + rd32(E1000_CBTMPC); + rd32(E1000_HTDPMC); + rd32(E1000_CBRMPC); + rd32(E1000_RPTHC); + rd32(E1000_HGPTC); + rd32(E1000_HTCBDPC); + rd32(E1000_HGORCL); + rd32(E1000_HGORCH); + rd32(E1000_HGOTCL); + rd32(E1000_HGOTCH); + rd32(E1000_LENERRS); /* This register should not be read in copper configurations */ - if (hw->phy.media_type == e1000_media_type_internal_serdes) - temp = rd32(E1000_SCVPC); + if (hw->phy.media_type == e1000_media_type_internal_serdes || + igb_sgmii_active_82575(hw)) + rd32(E1000_SCVPC); } /**