X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fmtd%2Fnand%2FKconfig;h=2d12dcdd740cfd42d3b06d29b9ab947e12e98651;hb=9654640d0af8f2de40ff3807d3695109d3463f54;hp=3db77eec0ed2539031c807732858dda2a21c39fc;hpb=dbe1ab9514c231c9b062140a107d9dea0eabefcc;p=pandora-kernel.git diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 3db77eec0ed2..2d12dcdd740c 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -11,7 +11,7 @@ config MTD_NAND help This enables support for accessing all type of NAND flash devices. For further information see - . + . config MTD_NAND_VERIFY_WRITE bool "Verify NAND page writes" @@ -21,7 +21,7 @@ config MTD_NAND_VERIFY_WRITE NAND flash device internally checks only bits transitioning from 1 to 0. There is a rare possibility that even though the device thinks the write was successful, a bit could have been - flipped accidentaly due to device wear or something else. + flipped accidentally due to device wear or something else. config MTD_NAND_ECC_SMC bool "NAND ECC Smart Media byte order" @@ -90,6 +90,7 @@ config MTD_NAND_RTC_FROM4 depends on MTD_NAND && SH_SOLUTION_ENGINE select REED_SOLOMON select REED_SOLOMON_DEC8 + select BITREVERSE help This enables the driver for the Renesas Technology AG-AND flash interface board (FROM_BOARD4) @@ -125,13 +126,10 @@ config MTD_NAND_S3C2410_HWECC incorrect ECC generation, and if using these, the default of software ECC is preferable. - If you lay down a device with the hardware ECC, then you will - currently not be able to switch to software, as there is no - implementation for ECC method used by the S3C2410 - config MTD_NAND_NDFC tristate "NDFC NanD Flash Controller" depends on MTD_NAND && 44x + select MTD_NAND_ECC_SMC help NDFC Nand Flash Controllers are integrated in EP44x SoCs @@ -219,6 +217,21 @@ config MTD_NAND_SHARPSL tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)" depends on MTD_NAND && ARCH_PXA +config MTD_NAND_BASLER_EXCITE + tristate "Support for NAND Flash on Basler eXcite" + depends on MTD_NAND && BASLER_EXCITE + help + This enables the driver for the NAND flash device found on the + Basler eXcite Smart Camera. If built as a module, the driver + will be named "excite_nandflash.ko". + +config MTD_NAND_CAFE + tristate "NAND support for OLPC CAFÉ chip" + depends on MTD_NAND && PCI + help + Use NAND flash attached to the CAFÉ chip designed for the $100 + laptop. + config MTD_NAND_CS553X tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)" depends on MTD_NAND && X86_32 && (X86_PC || X86_GENERICARCH) @@ -232,6 +245,13 @@ config MTD_NAND_CS553X If you say "m", the module will be called "cs553x_nand.ko". +config MTD_NAND_AT91 + bool "Support for NAND Flash / SmartMedia on AT91" + depends on MTD_NAND && ARCH_AT91 + help + Enables support for NAND Flash / Smart Media Card interface + on Atmel AT91 processors. + config MTD_NAND_NANDSIM tristate "Support for NAND Flash Simulator" depends on MTD_NAND && MTD_PARTITIONS