X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fmedia%2Frc%2Fnuvoton-cir.h;h=379795d61ea7684f4eac4dc08ddb23b7ab4d9459;hb=616a4b83bd1b4ec2260a91480e211290c35348bb;hp=048135eea70201e12cc63a103334e9c8606d45fa;hpb=53f358a81e10e798f44af896ffacaedd7ac0269b;p=pandora-kernel.git

diff --git a/drivers/media/rc/nuvoton-cir.h b/drivers/media/rc/nuvoton-cir.h
index 048135eea702..379795d61ea7 100644
--- a/drivers/media/rc/nuvoton-cir.h
+++ b/drivers/media/rc/nuvoton-cir.h
@@ -330,9 +330,13 @@ struct nvt_dev {
 #define EFER_EFM_DISABLE	0xaa
 
 /* Chip IDs found in CR_CHIP_ID_{HI,LO} */
-#define CHIP_ID_HIGH		0xb4
-#define CHIP_ID_LOW		0x72
-#define CHIP_ID_LOW2		0x73
+#define CHIP_ID_HIGH_667	0xa5
+#define CHIP_ID_HIGH_677B	0xb4
+#define CHIP_ID_HIGH_677C	0xc3
+#define CHIP_ID_LOW_667		0x13
+#define CHIP_ID_LOW_677B2	0x72
+#define CHIP_ID_LOW_677B3	0x73
+#define CHIP_ID_LOW_677C	0x33
 
 /* Config regs we need to care about */
 #define CR_SOFTWARE_RESET	0x02
@@ -341,6 +345,7 @@ struct nvt_dev {
 #define CR_CHIP_ID_LO		0x21
 #define CR_DEV_POWER_DOWN	0x22 /* bit 2 is CIR power, default power on */
 #define CR_OUTPUT_PIN_SEL	0x27
+#define CR_MULTIFUNC_PIN_SEL	0x2c
 #define CR_LOGICAL_DEV_EN	0x30 /* valid for all logical devices */
 /* next three regs valid for both the CIR and CIR_WAKE logical devices */
 #define CR_CIR_BASE_ADDR_HI	0x60
@@ -364,10 +369,16 @@ struct nvt_dev {
 #define CIR_INTR_MOUSE_IRQ_BIT	0x80
 #define PME_INTR_CIR_PASS_BIT	0x08
 
+/* w83677hg CIR pin config */
 #define OUTPUT_PIN_SEL_MASK	0xbc
 #define OUTPUT_ENABLE_CIR	0x01 /* Pin95=CIRRX, Pin96=CIRTX1 */
 #define OUTPUT_ENABLE_CIRWB	0x40 /* enable wide-band sensor */
 
+/* w83667hg CIR pin config */
+#define MULTIFUNC_PIN_SEL_MASK	0x1f
+#define MULTIFUNC_ENABLE_CIR	0x80 /* Pin75=CIRRX, Pin76=CIRTX1 */
+#define MULTIFUNC_ENABLE_CIRWB	0x20 /* enable wide-band sensor */
+
 /* MCE CIR signal length, related on sample period */
 
 /* MCE CIR controller signal length: about 43ms