X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fhwmon%2Fds1621.c;h=1212d6b7f316ee6297374d1f3454a76d2e7ac0ae;hb=721e2629fa2167c0e5a9f10d704b1fee1621a8cb;hp=c849c0c6ee9ce37edb2b86061aa595476946686c;hpb=c972398b7871d9fb58c6a317786065a7cc6ca4be;p=pandora-kernel.git diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index c849c0c6ee9c..1212d6b7f316 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -52,9 +53,11 @@ MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low") #define DS1621_REG_CONFIG_DONE 0x80 /* The DS1621 registers */ -#define DS1621_REG_TEMP 0xAA /* word, RO */ -#define DS1621_REG_TEMP_MIN 0xA1 /* word, RW */ -#define DS1621_REG_TEMP_MAX 0xA2 /* word, RW */ +static const u8 DS1621_REG_TEMP[3] = { + 0xAA, /* input, word, RO */ + 0xA2, /* min, word, RW */ + 0xA1, /* max, word, RW */ +}; #define DS1621_REG_CONF 0xAC /* byte, RW */ #define DS1621_COM_START 0xEE /* no data */ #define DS1621_COM_STOP 0x22 /* no data */ @@ -63,10 +66,7 @@ MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low") #define DS1621_ALARM_TEMP_HIGH 0x40 #define DS1621_ALARM_TEMP_LOW 0x20 -/* Conversions. Rounding and limit checking is only done on the TO_REG - variants. Note that you should be a bit careful with which arguments - these macros are called: arguments may be evaluated more than once. - Fixing this is just not worth it. */ +/* Conversions */ #define ALARMS_FROM_REG(val) ((val) & \ (DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW)) @@ -78,7 +78,7 @@ struct ds1621_data { char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ - u16 temp, temp_min, temp_max; /* Register values, word */ + u16 temp[3]; /* Register values, word */ u8 conf; /* Register encoding, combined */ }; @@ -101,7 +101,7 @@ static struct i2c_driver ds1621_driver = { /* All registers are word-sized, except for the configuration register. DS1621 uses a high-byte first convention, which is exactly opposite to - the usual practice. */ + the SMBus standard. */ static int ds1621_read_value(struct i2c_client *client, u8 reg) { if (reg == DS1621_REG_CONF) @@ -110,9 +110,6 @@ static int ds1621_read_value(struct i2c_client *client, u8 reg) return swab16(i2c_smbus_read_word_data(client, reg)); } -/* All registers are word-sized, except for the configuration register. - DS1621 uses a high-byte first convention, which is exactly opposite to - the usual practice. */ static int ds1621_write_value(struct i2c_client *client, u8 reg, u16 value) { if (reg == DS1621_REG_CONF) @@ -139,50 +136,61 @@ static void ds1621_init_client(struct i2c_client *client) i2c_smbus_write_byte(client, DS1621_COM_START); } -#define show(value) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct ds1621_data *data = ds1621_update_client(dev); \ - return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->value)); \ +static ssize_t show_temp(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ds1621_data *data = ds1621_update_client(dev); + return sprintf(buf, "%d\n", + LM75_TEMP_FROM_REG(data->temp[attr->index])); } -show(temp); -show(temp_min); -show(temp_max); - -#define set_temp(suffix, value, reg) \ -static ssize_t set_temp_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct ds1621_data *data = ds1621_update_client(dev); \ - u16 val = LM75_TEMP_TO_REG(simple_strtoul(buf, NULL, 10)); \ - \ - mutex_lock(&data->update_lock); \ - data->value = val; \ - ds1621_write_value(client, reg, data->value); \ - mutex_unlock(&data->update_lock); \ - return count; \ -} +static ssize_t set_temp(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct ds1621_data *data = ds1621_update_client(dev); + u16 val = LM75_TEMP_TO_REG(simple_strtoul(buf, NULL, 10)); -set_temp(min, temp_min, DS1621_REG_TEMP_MIN); -set_temp(max, temp_max, DS1621_REG_TEMP_MAX); + mutex_lock(&data->update_lock); + data->temp[attr->index] = val; + ds1621_write_value(client, DS1621_REG_TEMP[attr->index], + data->temp[attr->index]); + mutex_unlock(&data->update_lock); + return count; +} -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_alarms(struct device *dev, struct device_attribute *da, + char *buf) { struct ds1621_data *data = ds1621_update_client(dev); return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->conf)); } +static ssize_t show_alarm(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ds1621_data *data = ds1621_update_client(dev); + return sprintf(buf, "%d\n", !!(data->conf & attr->index)); +} + static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); -static DEVICE_ATTR(temp1_input, S_IRUGO , show_temp, NULL); -static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO , show_temp_min, set_temp_min); -static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp, set_temp, 1); +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp, set_temp, 2); +static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, + DS1621_ALARM_TEMP_LOW); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, + DS1621_ALARM_TEMP_HIGH); static struct attribute *ds1621_attributes[] = { - &dev_attr_temp1_input.attr, - &dev_attr_temp1_min.attr, - &dev_attr_temp1_max.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, &dev_attr_alarms.attr, NULL }; @@ -204,9 +212,9 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address, int kind) { int conf, temp; - struct i2c_client *new_client; + struct i2c_client *client; struct ds1621_data *data; - int err = 0; + int i, err = 0; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA @@ -221,55 +229,44 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address, goto exit; } - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &ds1621_driver; - new_client->flags = 0; - + client = &data->client; + i2c_set_clientdata(client, data); + client->addr = address; + client->adapter = adapter; + client->driver = &ds1621_driver; /* Now, we do the remaining detection. It is lousy. */ if (kind < 0) { /* The NVB bit should be low if no EEPROM write has been requested during the latest 10ms, which is highly improbable in our case. */ - conf = ds1621_read_value(new_client, DS1621_REG_CONF); + conf = ds1621_read_value(client, DS1621_REG_CONF); if (conf & DS1621_REG_CONFIG_NVB) goto exit_free; /* The 7 lowest bits of a temperature should always be 0. */ - temp = ds1621_read_value(new_client, DS1621_REG_TEMP); - if (temp & 0x007f) - goto exit_free; - temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MIN); - if (temp & 0x007f) - goto exit_free; - temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MAX); - if (temp & 0x007f) - goto exit_free; + for (i = 0; i < ARRAY_SIZE(data->temp); i++) { + temp = ds1621_read_value(client, DS1621_REG_TEMP[i]); + if (temp & 0x007f) + goto exit_free; + } } - /* Determine the chip type - only one kind supported! */ - if (kind <= 0) - kind = ds1621; - /* Fill in remaining client fields and put it into the global list */ - strlcpy(new_client->name, "ds1621", I2C_NAME_SIZE); - data->valid = 0; + strlcpy(client->name, "ds1621", I2C_NAME_SIZE); mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) + if ((err = i2c_attach_client(client))) goto exit_free; /* Initialize the DS1621 chip */ - ds1621_init_client(new_client); + ds1621_init_client(client); /* Register sysfs hooks */ - if ((err = sysfs_create_group(&new_client->dev.kobj, &ds1621_group))) + if ((err = sysfs_create_group(&client->dev.kobj, &ds1621_group))) goto exit_detach; - data->class_dev = hwmon_device_register(&new_client->dev); + data->class_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); goto exit_remove_files; @@ -278,9 +275,9 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address, return 0; exit_remove_files: - sysfs_remove_group(&new_client->dev.kobj, &ds1621_group); + sysfs_remove_group(&client->dev.kobj, &ds1621_group); exit_detach: - i2c_detach_client(new_client); + i2c_detach_client(client); exit_free: kfree(data); exit: @@ -314,23 +311,21 @@ static struct ds1621_data *ds1621_update_client(struct device *dev) if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { + int i; dev_dbg(&client->dev, "Starting ds1621 update\n"); data->conf = ds1621_read_value(client, DS1621_REG_CONF); - data->temp = ds1621_read_value(client, DS1621_REG_TEMP); - - data->temp_min = ds1621_read_value(client, - DS1621_REG_TEMP_MIN); - data->temp_max = ds1621_read_value(client, - DS1621_REG_TEMP_MAX); + for (i = 0; i < ARRAY_SIZE(data->temp); i++) + data->temp[i] = ds1621_read_value(client, + DS1621_REG_TEMP[i]); /* reset alarms if necessary */ new_conf = data->conf; - if (data->temp < data->temp_min) + if (data->temp[0] > data->temp[1]) /* input > min */ new_conf &= ~DS1621_ALARM_TEMP_LOW; - if (data->temp > data->temp_max) + if (data->temp[0] < data->temp[2]) /* input < max */ new_conf &= ~DS1621_ALARM_TEMP_HIGH; if (data->conf != new_conf) ds1621_write_value(client, DS1621_REG_CONF,