X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Fppc64%2Fkernel%2Fhead.S;h=58c314738c9987f441ef29a273c551436db1650e;hb=ad2c10f8f00d3fe2e37dd8a107e7cf4ac0459489;hp=accaa052d31fbe3b861e048ee0eb3de0bd5e2845;hpb=b2382b363df828f25e35ed8b70a3da33b29b2a64;p=pandora-kernel.git diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S index accaa052d31f..58c314738c99 100644 --- a/arch/ppc64/kernel/head.S +++ b/arch/ppc64/kernel/head.S @@ -23,17 +23,14 @@ * 2 of the License, or (at your option) any later version. */ -#define SECONDARY_PROCESSORS - #include #include #include #include #include -#include #include #include -#include +#include #include #include #include @@ -44,19 +41,14 @@ #define DO_SOFT_DISABLE #endif -/* - * hcall interface to pSeries LPAR - */ -#define H_SET_ASR 0x30 - /* * We layout physical memory as follows: * 0x0000 - 0x00ff : Secondary processor spin code * 0x0100 - 0x2fff : pSeries Interrupt prologs - * 0x3000 - 0x3fff : Interrupt support - * 0x4000 - 0x4fff : NACA - * 0x6000 : iSeries and common interrupt prologs - * 0x9000 - 0x9fff : Initial segment table + * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs + * 0x6000 - 0x6fff : Initial (CPU0) segment table + * 0x7000 - 0x7fff : FWNMI data area + * 0x8000 - : Early init and support code */ /* @@ -94,6 +86,7 @@ END_FTR_SECTION(0, 1) /* Catch branch to 0 in real mode */ trap + #ifdef CONFIG_PPC_ISERIES /* * At offset 0x20, there is a pointer to iSeries LPAR data. @@ -103,12 +96,12 @@ END_FTR_SECTION(0, 1) .llong hvReleaseData-KERNELBASE /* - * At offset 0x28 and 0x30 are offsets to the msChunks + * At offset 0x28 and 0x30 are offsets to the mschunks_map * array (used by the iSeries LPAR debugger to do translation * between physical addresses and absolute addresses) and * to the pidhash table (also used by the debugger) */ - .llong msChunks-KERNELBASE + .llong mschunks_map-KERNELBASE .llong 0 /* pidhash-KERNELBASE SFRXXX */ /* Offset 0x38 - Pointer to start of embedded System.map */ @@ -120,7 +113,7 @@ embedded_sysmap_start: embedded_sysmap_end: .llong 0 -#else /* CONFIG_PPC_ISERIES */ +#endif /* CONFIG_PPC_ISERIES */ /* Secondary processors spin on this value until it goes to 1. */ .globl __secondary_hold_spinloop @@ -155,7 +148,7 @@ _GLOBAL(__secondary_hold) std r24,__secondary_hold_acknowledge@l(0) sync - /* All secondary cpu's wait here until told to start. */ + /* All secondary cpus wait here until told to start. */ 100: ld r4,__secondary_hold_spinloop@l(0) cmpdi 0,r4,1 bne 100b @@ -170,7 +163,6 @@ _GLOBAL(__secondary_hold) BUG_OPCODE #endif #endif -#endif /* This value is used to mark exception frames on the stack. */ .section ".toc","aw" @@ -502,33 +494,37 @@ system_call_pSeries: STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint) STD_EXCEPTION_PSERIES(0x1700, altivec_assist) + . = 0x3000 + +/*** pSeries interrupt support ***/ + /* moved from 0xf00 */ - STD_EXCEPTION_PSERIES(0x3000, performance_monitor) + STD_EXCEPTION_PSERIES(., performance_monitor) - . = 0x3100 + .align 7 _GLOBAL(do_stab_bolted_pSeries) mtcrf 0x80,r12 mfspr r12,SPRG2 EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted) - - /* Space for the naca. Architected to be located at real address - * NACA_PHYS_ADDR. Various tools rely on this location being fixed. - * The first dword of the naca is required by iSeries LPAR to - * point to itVpdAreas. On pSeries native, this value is not used. - */ - . = NACA_PHYS_ADDR - .globl __end_interrupts -__end_interrupts: -#ifdef CONFIG_PPC_ISERIES - .globl naca -naca: - .llong itVpdAreas - .llong 0 /* xRamDisk */ - .llong 0 /* xRamDiskSize */ +/* + * Vectors for the FWNMI option. Share common code. + */ + .globl system_reset_fwnmi +system_reset_fwnmi: + HMT_MEDIUM + mtspr SPRG1,r13 /* save r13 */ + RUNLATCH_ON(r13) + EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) - . = 0x6100 + .globl machine_check_fwnmi +machine_check_fwnmi: + HMT_MEDIUM + mtspr SPRG1,r13 /* save r13 */ + RUNLATCH_ON(r13) + EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) +#ifdef CONFIG_PPC_ISERIES /*** ISeries-LPAR interrupt handlers ***/ STD_EXCEPTION_ISERIES(0x200, machine_check, PACA_EXMC) @@ -626,9 +622,7 @@ system_reset_iSeries: cmpwi 0,r23,0 beq iSeries_secondary_smp_loop /* Loop until told to go */ -#ifdef SECONDARY_PROCESSORS bne .__secondary_start /* Loop until told to go */ -#endif iSeries_secondary_smp_loop: /* Let the Hypervisor know we are alive */ /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */ @@ -671,51 +665,8 @@ hardware_interrupt_iSeries_masked: ld r13,PACA_EXGEN+EX_R13(r13) rfid b . /* prevent speculative execution */ -#endif - -/* - * Data area reserved for FWNMI option. - */ - .= 0x7000 - .globl fwnmi_data_area -fwnmi_data_area: - -#ifdef CONFIG_PPC_ISERIES - . = LPARMAP_PHYS -#include "lparmap.s" #endif /* CONFIG_PPC_ISERIES */ -/* - * Vectors for the FWNMI option. Share common code. - */ - . = 0x8000 - .globl system_reset_fwnmi -system_reset_fwnmi: - HMT_MEDIUM - mtspr SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) - .globl machine_check_fwnmi -machine_check_fwnmi: - HMT_MEDIUM - mtspr SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) - EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) - - /* - * Space for the initial segment table - * For LPAR, the hypervisor must fill in at least one entry - * before we get control (with relocate on) - */ - . = STAB0_PHYS_ADDR - .globl __start_stab -__start_stab: - - . = (STAB0_PHYS_ADDR + PAGE_SIZE) - .globl __end_stab -__end_stab: - - /*** Common interrupt handlers ***/ STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception) @@ -752,8 +703,8 @@ machine_check_common: * R9 contains the saved CR, r13 points to the paca, * r10 contains the (bad) kernel stack pointer, * r11 and r12 contain the saved SRR0 and SRR1. - * We switch to using the paca guard page as an emergency stack, - * save the registers there, and call kernel_bad_stack(), which panics. + * We switch to using an emergency stack, save the registers there, + * and call kernel_bad_stack(), which panics. */ bad_stack: ld r1,PACAEMERGSP(r13) @@ -906,6 +857,62 @@ fp_unavailable_common: bl .kernel_fp_unavailable_exception BUG_OPCODE +/* + * load_up_fpu(unused, unused, tsk) + * Disable FP for the task which had the FPU previously, + * and save its floating-point registers in its thread_struct. + * Enables the FPU for use in the kernel on return. + * On SMP we know the fpu is free, since we give it up every + * switch (ie, no lazy save of the FP registers). + * On entry: r13 == 'current' && last_task_used_math != 'current' + */ +_STATIC(load_up_fpu) + mfmsr r5 /* grab the current MSR */ + ori r5,r5,MSR_FP + mtmsrd r5 /* enable use of fpu now */ + isync +/* + * For SMP, we don't do lazy FPU switching because it just gets too + * horrendously complex, especially when a task switches from one CPU + * to another. Instead we call giveup_fpu in switch_to. + * + */ +#ifndef CONFIG_SMP + ld r3,last_task_used_math@got(r2) + ld r4,0(r3) + cmpdi 0,r4,0 + beq 1f + /* Save FP state to last_task_used_math's THREAD struct */ + addi r4,r4,THREAD + SAVE_32FPRS(0, r4) + mffs fr0 + stfd fr0,THREAD_FPSCR(r4) + /* Disable FP for last_task_used_math */ + ld r5,PT_REGS(r4) + ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) + li r6,MSR_FP|MSR_FE0|MSR_FE1 + andc r4,r4,r6 + std r4,_MSR-STACK_FRAME_OVERHEAD(r5) +1: +#endif /* CONFIG_SMP */ + /* enable use of FP after return */ + ld r4,PACACURRENT(r13) + addi r5,r4,THREAD /* Get THREAD */ + ld r4,THREAD_FPEXC_MODE(r5) + ori r12,r12,MSR_FP + or r12,r12,r4 + std r12,_MSR(r1) + lfd fr0,THREAD_FPSCR(r5) + mtfsf 0xff,fr0 + REST_32FPRS(0, r5) +#ifndef CONFIG_SMP + /* Update last_task_used_math to 'current' */ + subi r4,r5,THREAD /* Back to 'current' */ + std r4,0(r3) +#endif /* CONFIG_SMP */ + /* restore registers and return */ + b fast_exception_return + .align 7 .globl altivec_unavailable_common altivec_unavailable_common: @@ -921,6 +928,80 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) bl .altivec_unavailable_exception b .ret_from_except +#ifdef CONFIG_ALTIVEC +/* + * load_up_altivec(unused, unused, tsk) + * Disable VMX for the task which had it previously, + * and save its vector registers in its thread_struct. + * Enables the VMX for use in the kernel on return. + * On SMP we know the VMX is free, since we give it up every + * switch (ie, no lazy save of the vector registers). + * On entry: r13 == 'current' && last_task_used_altivec != 'current' + */ +_STATIC(load_up_altivec) + mfmsr r5 /* grab the current MSR */ + oris r5,r5,MSR_VEC@h + mtmsrd r5 /* enable use of VMX now */ + isync + +/* + * For SMP, we don't do lazy VMX switching because it just gets too + * horrendously complex, especially when a task switches from one CPU + * to another. Instead we call giveup_altvec in switch_to. + * VRSAVE isn't dealt with here, that is done in the normal context + * switch code. Note that we could rely on vrsave value to eventually + * avoid saving all of the VREGs here... + */ +#ifndef CONFIG_SMP + ld r3,last_task_used_altivec@got(r2) + ld r4,0(r3) + cmpdi 0,r4,0 + beq 1f + /* Save VMX state to last_task_used_altivec's THREAD struct */ + addi r4,r4,THREAD + SAVE_32VRS(0,r5,r4) + mfvscr vr0 + li r10,THREAD_VSCR + stvx vr0,r10,r4 + /* Disable VMX for last_task_used_altivec */ + ld r5,PT_REGS(r4) + ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) + lis r6,MSR_VEC@h + andc r4,r4,r6 + std r4,_MSR-STACK_FRAME_OVERHEAD(r5) +1: +#endif /* CONFIG_SMP */ + /* Hack: if we get an altivec unavailable trap with VRSAVE + * set to all zeros, we assume this is a broken application + * that fails to set it properly, and thus we switch it to + * all 1's + */ + mfspr r4,SPRN_VRSAVE + cmpdi 0,r4,0 + bne+ 1f + li r4,-1 + mtspr SPRN_VRSAVE,r4 +1: + /* enable use of VMX after return */ + ld r4,PACACURRENT(r13) + addi r5,r4,THREAD /* Get THREAD */ + oris r12,r12,MSR_VEC@h + std r12,_MSR(r1) + li r4,1 + li r10,THREAD_VSCR + stw r4,THREAD_USED_VR(r5) + lvx vr0,r10,r5 + mtvscr vr0 + REST_32VRS(0,r4,r5) +#ifndef CONFIG_SMP + /* Update last_task_used_math to 'current' */ + subi r4,r5,THREAD /* Back to 'current' */ + std r4,0(r3) +#endif /* CONFIG_SMP */ + /* restore registers and return */ + b fast_exception_return +#endif /* CONFIG_ALTIVEC */ + /* * Hash table stuff */ @@ -1167,6 +1248,42 @@ unrecov_slb: bl .unrecoverable_exception b 1b +/* + * Space for CPU0's segment table. + * + * On iSeries, the hypervisor must fill in at least one entry before + * we get control (with relocate on). The address is give to the hv + * as a page number (see xLparMap in LparData.c), so this must be at a + * fixed address (the linker can't compute (u64)&initial_stab >> + * PAGE_SHIFT). + */ + . = STAB0_PHYS_ADDR /* 0x6000 */ + .globl initial_stab +initial_stab: + .space 4096 + +/* + * Data area reserved for FWNMI option. + * This address (0x7000) is fixed by the RPA. + */ + .= 0x7000 + .globl fwnmi_data_area +fwnmi_data_area: + + /* iSeries does not use the FWNMI stuff, so it is safe to put + * this here, even if we later allow kernels that will boot on + * both pSeries and iSeries */ +#ifdef CONFIG_PPC_ISERIES + . = LPARMAP_PHYS +#include "lparmap.s" +/* + * This ".text" is here for old compilers that generate a trailing + * .note section when compiling .c files to .s + */ + .text +#endif /* CONFIG_PPC_ISERIES */ + + . = 0x8000 /* * On pSeries, secondary processors spin in the following code. @@ -1200,7 +1317,7 @@ _GLOBAL(pSeries_secondary_smp_init) b .kexec_wait /* next kernel might do better */ 2: mtspr SPRG3,r13 /* Save vaddr of paca in SPRG3 */ - /* From now on, r24 is expected to be logica cpuid */ + /* From now on, r24 is expected to be logical cpuid */ mr r24,r5 3: HMT_LOW lbz r23,PACAPROCSTART(r13) /* Test if this processor should */ @@ -1213,9 +1330,7 @@ _GLOBAL(pSeries_secondary_smp_init) cmpwi 0,r23,0 #ifdef CONFIG_SMP -#ifdef SECONDARY_PROCESSORS bne .__secondary_start -#endif #endif b 3b /* Loop until told to go */ @@ -1430,228 +1545,6 @@ _GLOBAL(copy_and_flush) .align 8 copy_to_here: -/* - * load_up_fpu(unused, unused, tsk) - * Disable FP for the task which had the FPU previously, - * and save its floating-point registers in its thread_struct. - * Enables the FPU for use in the kernel on return. - * On SMP we know the fpu is free, since we give it up every - * switch (ie, no lazy save of the FP registers). - * On entry: r13 == 'current' && last_task_used_math != 'current' - */ -_STATIC(load_up_fpu) - mfmsr r5 /* grab the current MSR */ - ori r5,r5,MSR_FP - mtmsrd r5 /* enable use of fpu now */ - isync -/* - * For SMP, we don't do lazy FPU switching because it just gets too - * horrendously complex, especially when a task switches from one CPU - * to another. Instead we call giveup_fpu in switch_to. - * - */ -#ifndef CONFIG_SMP - ld r3,last_task_used_math@got(r2) - ld r4,0(r3) - cmpdi 0,r4,0 - beq 1f - /* Save FP state to last_task_used_math's THREAD struct */ - addi r4,r4,THREAD - SAVE_32FPRS(0, r4) - mffs fr0 - stfd fr0,THREAD_FPSCR(r4) - /* Disable FP for last_task_used_math */ - ld r5,PT_REGS(r4) - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - li r6,MSR_FP|MSR_FE0|MSR_FE1 - andc r4,r4,r6 - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#endif /* CONFIG_SMP */ - /* enable use of FP after return */ - ld r4,PACACURRENT(r13) - addi r5,r4,THREAD /* Get THREAD */ - ld r4,THREAD_FPEXC_MODE(r5) - ori r12,r12,MSR_FP - or r12,r12,r4 - std r12,_MSR(r1) - lfd fr0,THREAD_FPSCR(r5) - mtfsf 0xff,fr0 - REST_32FPRS(0, r5) -#ifndef CONFIG_SMP - /* Update last_task_used_math to 'current' */ - subi r4,r5,THREAD /* Back to 'current' */ - std r4,0(r3) -#endif /* CONFIG_SMP */ - /* restore registers and return */ - b fast_exception_return - -/* - * disable_kernel_fp() - * Disable the FPU. - */ -_GLOBAL(disable_kernel_fp) - mfmsr r3 - rldicl r0,r3,(63-MSR_FP_LG),1 - rldicl r3,r0,(MSR_FP_LG+1),0 - mtmsrd r3 /* disable use of fpu now */ - isync - blr - -/* - * giveup_fpu(tsk) - * Disable FP for the task given as the argument, - * and save the floating-point registers in its thread_struct. - * Enables the FPU for use in the kernel on return. - */ -_GLOBAL(giveup_fpu) - mfmsr r5 - ori r5,r5,MSR_FP - mtmsrd r5 /* enable use of fpu now */ - isync - cmpdi 0,r3,0 - beqlr- /* if no previous owner, done */ - addi r3,r3,THREAD /* want THREAD of task */ - ld r5,PT_REGS(r3) - cmpdi 0,r5,0 - SAVE_32FPRS(0, r3) - mffs fr0 - stfd fr0,THREAD_FPSCR(r3) - beq 1f - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - li r3,MSR_FP|MSR_FE0|MSR_FE1 - andc r4,r4,r3 /* disable FP for previous task */ - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#ifndef CONFIG_SMP - li r5,0 - ld r4,last_task_used_math@got(r2) - std r5,0(r4) -#endif /* CONFIG_SMP */ - blr - - -#ifdef CONFIG_ALTIVEC - -/* - * load_up_altivec(unused, unused, tsk) - * Disable VMX for the task which had it previously, - * and save its vector registers in its thread_struct. - * Enables the VMX for use in the kernel on return. - * On SMP we know the VMX is free, since we give it up every - * switch (ie, no lazy save of the vector registers). - * On entry: r13 == 'current' && last_task_used_altivec != 'current' - */ -_STATIC(load_up_altivec) - mfmsr r5 /* grab the current MSR */ - oris r5,r5,MSR_VEC@h - mtmsrd r5 /* enable use of VMX now */ - isync - -/* - * For SMP, we don't do lazy VMX switching because it just gets too - * horrendously complex, especially when a task switches from one CPU - * to another. Instead we call giveup_altvec in switch_to. - * VRSAVE isn't dealt with here, that is done in the normal context - * switch code. Note that we could rely on vrsave value to eventually - * avoid saving all of the VREGs here... - */ -#ifndef CONFIG_SMP - ld r3,last_task_used_altivec@got(r2) - ld r4,0(r3) - cmpdi 0,r4,0 - beq 1f - /* Save VMX state to last_task_used_altivec's THREAD struct */ - addi r4,r4,THREAD - SAVE_32VRS(0,r5,r4) - mfvscr vr0 - li r10,THREAD_VSCR - stvx vr0,r10,r4 - /* Disable VMX for last_task_used_altivec */ - ld r5,PT_REGS(r4) - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r6,MSR_VEC@h - andc r4,r4,r6 - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#endif /* CONFIG_SMP */ - /* Hack: if we get an altivec unavailable trap with VRSAVE - * set to all zeros, we assume this is a broken application - * that fails to set it properly, and thus we switch it to - * all 1's - */ - mfspr r4,SPRN_VRSAVE - cmpdi 0,r4,0 - bne+ 1f - li r4,-1 - mtspr SPRN_VRSAVE,r4 -1: - /* enable use of VMX after return */ - ld r4,PACACURRENT(r13) - addi r5,r4,THREAD /* Get THREAD */ - oris r12,r12,MSR_VEC@h - std r12,_MSR(r1) - li r4,1 - li r10,THREAD_VSCR - stw r4,THREAD_USED_VR(r5) - lvx vr0,r10,r5 - mtvscr vr0 - REST_32VRS(0,r4,r5) -#ifndef CONFIG_SMP - /* Update last_task_used_math to 'current' */ - subi r4,r5,THREAD /* Back to 'current' */ - std r4,0(r3) -#endif /* CONFIG_SMP */ - /* restore registers and return */ - b fast_exception_return - -/* - * disable_kernel_altivec() - * Disable the VMX. - */ -_GLOBAL(disable_kernel_altivec) - mfmsr r3 - rldicl r0,r3,(63-MSR_VEC_LG),1 - rldicl r3,r0,(MSR_VEC_LG+1),0 - mtmsrd r3 /* disable use of VMX now */ - isync - blr - -/* - * giveup_altivec(tsk) - * Disable VMX for the task given as the argument, - * and save the vector registers in its thread_struct. - * Enables the VMX for use in the kernel on return. - */ -_GLOBAL(giveup_altivec) - mfmsr r5 - oris r5,r5,MSR_VEC@h - mtmsrd r5 /* enable use of VMX now */ - isync - cmpdi 0,r3,0 - beqlr- /* if no previous owner, done */ - addi r3,r3,THREAD /* want THREAD of task */ - ld r5,PT_REGS(r3) - cmpdi 0,r5,0 - SAVE_32VRS(0,r4,r3) - mfvscr vr0 - li r4,THREAD_VSCR - stvx vr0,r4,r3 - beq 1f - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r3,MSR_VEC@h - andc r4,r4,r3 /* disable FP for previous task */ - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#ifndef CONFIG_SMP - li r5,0 - ld r4,last_task_used_altivec@got(r2) - std r5,0(r4) -#endif /* CONFIG_SMP */ - blr - -#endif /* CONFIG_ALTIVEC */ - #ifdef CONFIG_SMP #ifdef CONFIG_PPC_PMAC /* @@ -1753,8 +1646,9 @@ _GLOBAL(__secondary_start) #else /* set the ASR */ ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ + ld r3,0(r3) lwz r3,PLATFORM(r3) /* r3 = platform flags */ - cmpldi r3,PLATFORM_PSERIES_LPAR + andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ bne 98f mfspr r3,PVR srwi r3,r3,16 @@ -1916,8 +1810,9 @@ _STATIC(start_here_multiplatform) ld r3,PACASTABREAL(r13) ori r4,r3,1 /* turn on valid bit */ ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ + ld r3,0(r3) lwz r3,PLATFORM(r3) /* r3 = platform flags */ - cmpldi r3,PLATFORM_PSERIES_LPAR + andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ bne 98f mfspr r3,PVR srwi r3,r3,16 @@ -1935,9 +1830,10 @@ _STATIC(start_here_multiplatform) 99: /* Set SDR1 (hash table pointer) */ ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ + ld r3,0(r3) lwz r3,PLATFORM(r3) /* r3 = platform flags */ /* Test if bit 0 is set (LPAR bit) */ - andi. r3,r3,0x1 + andi. r3,r3,PLATFORM_LPAR bne 98f LOADADDR(r6,_SDR1) /* Only if NOT LPAR */ sub r6,r6,r26 @@ -2002,9 +1898,6 @@ _STATIC(start_here_common) bl .start_kernel -_GLOBAL(__setup_cpu_power3) - blr - _GLOBAL(hmt_init) #ifdef CONFIG_HMT LOADADDR(r5, hmt_thread_data) @@ -2095,20 +1988,19 @@ _GLOBAL(smp_release_cpus) /* * We put a few things here that have to be page-aligned. - * This stuff goes at the beginning of the data segment, - * which is page-aligned. + * This stuff goes at the beginning of the bss, which is page-aligned. */ - .data + .section ".bss" + .align 12 - .globl sdata -sdata: + .globl empty_zero_page empty_zero_page: - .space 4096 + .space PAGE_SIZE .globl swapper_pg_dir swapper_pg_dir: - .space 4096 + .space PAGE_SIZE /* * This space gets a copy of optional info passed to us by the bootstrap