X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Fpowerpc%2Fplatforms%2Fiseries%2Fsetup.c;h=cce7e309340c99f933390dd5cf81f65a0fb0ab39;hb=88d5a7bb75b5e8f600e79b16abaf008c7fdfd27d;hp=7f1953066ff8f7ae2f26d35a1511feeac24b1012;hpb=8a84fc15ae5cafcc366dd85cf8e1ab2040679abc;p=pandora-kernel.git

diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index 7f1953066ff8..cce7e309340c 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -21,7 +21,6 @@
 #include <linux/smp.h>
 #include <linux/param.h>
 #include <linux/string.h>
-#include <linux/initrd.h>
 #include <linux/seq_file.h>
 #include <linux/kdev_t.h>
 #include <linux/major.h>
@@ -80,8 +79,6 @@ extern void iSeries_pci_final_fixup(void);
 static void iSeries_pci_final_fixup(void) { }
 #endif
 
-extern int rd_size;		/* Defined in drivers/block/rd.c */
-
 extern unsigned long iSeries_recal_tb;
 extern unsigned long iSeries_recal_titan;
 
@@ -295,24 +292,6 @@ static void __init iSeries_init_early(void)
 {
 	DBG(" -> iSeries_init_early()\n");
 
-#if defined(CONFIG_BLK_DEV_INITRD)
-	/*
-	 * If the init RAM disk has been configured and there is
-	 * a non-zero starting address for it, set it up
-	 */
-	if (naca.xRamDisk) {
-		initrd_start = (unsigned long)__va(naca.xRamDisk);
-		initrd_end = initrd_start + naca.xRamDiskSize * HW_PAGE_SIZE;
-		initrd_below_start_ok = 1;	// ramdisk in kernel space
-		ROOT_DEV = Root_RAM0;
-		if (((rd_size * 1024) / HW_PAGE_SIZE) < naca.xRamDiskSize)
-			rd_size = (naca.xRamDiskSize * HW_PAGE_SIZE) / 1024;
-	} else
-#endif /* CONFIG_BLK_DEV_INITRD */
-	{
-	    /* ROOT_DEV = MKDEV(VIODASD_MAJOR, 1); */
-	}
-
 	iSeries_recal_tb = get_tb();
 	iSeries_recal_titan = HvCallXm_loadTod();
 
@@ -331,17 +310,6 @@ static void __init iSeries_init_early(void)
 
 	mf_init();
 
-	/* If we were passed an initrd, set the ROOT_DEV properly if the values
-	 * look sensible. If not, clear initrd reference.
-	 */
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE &&
-	    initrd_end > initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-		initrd_start = initrd_end = 0;
-#endif /* CONFIG_BLK_DEV_INITRD */
-
 	DBG(" <- iSeries_init_early()\n");
 }
 
@@ -559,7 +527,8 @@ static void __init iSeries_fixup_klimit(void)
 static int __init iSeries_src_init(void)
 {
         /* clear the progress line */
-        ppc_md.progress(" ", 0xffff);
+	if (firmware_has_feature(FW_FEATURE_ISERIES))
+		ppc_md.progress(" ", 0xffff);
         return 0;
 }
 
@@ -649,16 +618,34 @@ static void iseries_dedicated_idle(void)
 void __init iSeries_init_IRQ(void) { }
 #endif
 
+static void __iomem *iseries_ioremap(phys_addr_t address, unsigned long size,
+				     unsigned long flags)
+{
+	return (void __iomem *)address;
+}
+
+static void iseries_iounmap(volatile void __iomem *token)
+{
+}
+
+/*
+ * iSeries has no legacy IO, anything calling this function has to
+ * fail or bad things will happen
+ */
+static int iseries_check_legacy_ioport(unsigned int baseport)
+{
+	return -ENODEV;
+}
+
 static int __init iseries_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 	if (!of_flat_dt_is_compatible(root, "IBM,iSeries"))
 		return 0;
 
-	powerpc_firmware_features |= FW_FEATURE_ISERIES;
-	powerpc_firmware_features |= FW_FEATURE_LPAR;
-
 	hpte_init_iSeries();
+	/* iSeries does not support 16M pages */
+	cur_cpu_spec->cpu_features &= ~CPU_FTR_16M_PAGE;
 
 	return 1;
 }
@@ -680,6 +667,9 @@ define_machine(iseries) {
 	.calibrate_decr	= generic_calibrate_decr,
 	.progress	= iSeries_progress,
 	.probe		= iseries_probe,
+	.check_legacy_ioport	= iseries_check_legacy_ioport,
+	.ioremap	= iseries_ioremap,
+	.iounmap	= iseries_iounmap,
 	/* XXX Implement enable_pmcs for iSeries */
 };
 
@@ -687,6 +677,14 @@ void * __init iSeries_early_setup(void)
 {
 	unsigned long phys_mem_size;
 
+	/* Identify CPU type. This is done again by the common code later
+	 * on but calling this function multiple times is fine.
+	 */
+	identify_cpu(0, mfspr(SPRN_PVR));
+
+	powerpc_firmware_features |= FW_FEATURE_ISERIES;
+	powerpc_firmware_features |= FW_FEATURE_LPAR;
+
 	iSeries_fixup_klimit();
 
 	/*