X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Fpowerpc%2Fplatforms%2F86xx%2Fmpc86xx_hpcn.c;h=0b1b52168bb705204dc91dc04c3a9c2246eaf694;hb=920841d8d1d61bc12b43f95a579a5374f6d98f81;hp=ebae73eb00630f460a926e9b56dfbf004cd1756d;hpb=a8c4c20dfa8b28a3c99e33c639d9c2ea5657741e;p=pandora-kernel.git diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index ebae73eb0063..f42f801cf84e 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include @@ -37,6 +36,14 @@ #include "mpc86xx.h" #include "mpc8641_hpcn.h" +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) do { printk(KERN_ERR fmt); } while(0) +#else +#define DBG(fmt...) do { } while(0) +#endif + #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; @@ -44,205 +51,220 @@ unsigned long pci_dram_offset = 0; #endif -/* - * Internal interrupts are all Level Sensitive, and Positive Polarity - */ - -static u_char mpc86xx_hpcn_openpic_initsenses[] __initdata = { - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: Reserved */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: MCM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCIE1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: PCIE2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: Reserved */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: Reserved */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: DUART2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 1 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 1 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: TSEC 3 transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: TSEC 3 receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: TSEC 3 error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 1 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 2 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 2 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: TSEC 4 transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: TSEC 4 receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: TSEC 4 error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 2 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 32: SRIO error/write-port unit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 33: SRIO outbound doorbell */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 34: SRIO inbound doorbell */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 35: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 36: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 37: SRIO outbound message unit 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 38: SRIO inbound message unit 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 39: SRIO outbound message unit 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 40: SRIO inbound message unit 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 41: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 42: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 43: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 44: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 45: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 46: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 47: Unused */ - 0x0, /* External 0: */ - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ - 0x0, /* External 4: */ - 0x0, /* External 5: */ - 0x0, /* External 6: */ - 0x0, /* External 7: */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: Pixis FPGA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 9: ULI 8259 INTR Cascade */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 10: Quad ETH PHY */ - 0x0, /* External 11: */ - 0x0, - 0x0, - 0x0, - 0x0, -}; - +#ifdef CONFIG_PCI +static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc) +{ + unsigned int cascade_irq = i8259_irq(); + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); + desc->chip->eoi(irq); +} +#endif /* CONFIG_PCI */ void __init mpc86xx_hpcn_init_irq(void) { struct mpic *mpic1; - phys_addr_t openpic_paddr; + struct device_node *np; + struct resource res; +#ifdef CONFIG_PCI + struct device_node *cascade_node = NULL; + int cascade_irq; +#endif - /* Determine the Physical Address of the OpenPIC regs */ - openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET; + /* Determine PIC address. */ + np = of_find_node_by_type(NULL, "open-pic"); + if (np == NULL) + return; + of_address_to_resource(np, 0, &res); /* Alloc mpic structure and per isu has 16 INT entries. */ - mpic1 = mpic_alloc(openpic_paddr, + mpic1 = mpic_alloc(np, res.start, MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, - 16, MPC86xx_OPENPIC_IRQ_OFFSET, 0, 250, - mpc86xx_hpcn_openpic_initsenses, - sizeof(mpc86xx_hpcn_openpic_initsenses), + 16, NR_IRQS - 4, " MPIC "); BUG_ON(mpic1 == NULL); + mpic_assign_isu(mpic1, 0, res.start + 0x10000); + /* 48 Internal Interrupts */ - mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10200); - mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10400); - mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10600); + mpic_assign_isu(mpic1, 1, res.start + 0x10200); + mpic_assign_isu(mpic1, 2, res.start + 0x10400); + mpic_assign_isu(mpic1, 3, res.start + 0x10600); - /* 16 External interrupts */ - mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10000); + /* 16 External interrupts + * Moving them from [0 - 15] to [64 - 79] + */ + mpic_assign_isu(mpic1, 4, res.start + 0x10000); mpic_init(mpic1); #ifdef CONFIG_PCI - mpic_setup_cascade(MPC86xx_IRQ_EXT9, i8259_irq_cascade, NULL); - i8259_init(0, I8259_OFFSET); -#endif -} + /* Initialize i8259 controller */ + for_each_node_by_type(np, "interrupt-controller") + if (device_is_compatible(np, "chrp,iic")) { + cascade_node = np; + break; + } + if (cascade_node == NULL) { + printk(KERN_DEBUG "mpc86xxhpcn: no ISA interrupt controller\n"); + return; + } + + cascade_irq = irq_of_parse_and_map(cascade_node, 0); + if (cascade_irq == NO_IRQ) { + printk(KERN_ERR "mpc86xxhpcn: failed to map cascade interrupt"); + return; + } + DBG("mpc86xxhpcn: cascade mapped to irq %d\n", cascade_irq); + i8259_init(cascade_node, 0); + of_node_put(cascade_node); + set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade); +#endif +} #ifdef CONFIG_PCI -/* - * interrupt routing - */ -int -mpc86xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +enum pirq{PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH}; +const unsigned char uli1575_irq_route_table[16] = { + 0, /* 0: Reserved */ + 0x8, /* 1: 0b1000 */ + 0, /* 2: Reserved */ + 0x2, /* 3: 0b0010 */ + 0x4, /* 4: 0b0100 */ + 0x5, /* 5: 0b0101 */ + 0x7, /* 6: 0b0111 */ + 0x6, /* 7: 0b0110 */ + 0, /* 8: Reserved */ + 0x1, /* 9: 0b0001 */ + 0x3, /* 10: 0b0011 */ + 0x9, /* 11: 0b1001 */ + 0xb, /* 12: 0b1011 */ + 0, /* 13: Reserved */ + 0xd, /* 14, 0b1101 */ + 0xf, /* 15, 0b1111 */ +}; + +static int __devinit +get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin) { - static char pci_irq_table[][4] = { - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 17 -- PCI Slot 1 */ - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 18 -- PCI Slot 2 */ - {0, 0, 0, 0}, /* IDSEL 19 */ - {0, 0, 0, 0}, /* IDSEL 20 */ - {0, 0, 0, 0}, /* IDSEL 21 */ - {0, 0, 0, 0}, /* IDSEL 22 */ - {0, 0, 0, 0}, /* IDSEL 23 */ - {0, 0, 0, 0}, /* IDSEL 24 */ - {0, 0, 0, 0}, /* IDSEL 25 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, /* IDSEL 26 -- PCI Bridge*/ - {PIRQC, 0, 0, 0}, /* IDSEL 27 -- LAN */ - {PIRQE, PIRQF, PIRQH, PIRQ7}, /* IDSEL 28 -- USB 1.1 */ - {PIRQE, PIRQF, PIRQG, 0}, /* IDSEL 29 -- Audio & Modem */ - {PIRQH, 0, 0, 0}, /* IDSEL 30 -- LPC & PMU*/ - {PIRQD, 0, 0, 0}, /* IDSEL 31 -- ATA */ - }; - - const long min_idsel = 17, max_idsel = 31, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET; + struct of_irq oirq; + u32 laddr[3]; + struct device_node *hosenode = hose ? hose->arch_data : NULL; + + if (!hosenode) return -EINVAL; + + laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8); + laddr[1] = laddr[2] = 0; + of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq); + DBG("mpc86xx_hpcn: pci irq addr %x, slot %d, pin %d, irq %d\n", + laddr[0], slot, pin, oirq.specifier[0]); + return oirq.specifier[0]; } -static void __devinit quirk_ali1575(struct pci_dev *dev) +static void __devinit quirk_uli1575(struct pci_dev *dev) { unsigned short temp; + struct pci_controller *hose = pci_bus_to_host(dev->bus); + unsigned char irq2pin[16]; + unsigned long pirq_map_word = 0; + u32 irq; + int i; + + /* + * ULI1575 interrupts route setup + */ + memset(irq2pin, 0, 16); /* Initialize default value 0 */ + + /* + * PIRQA -> PIRQD mapping read from OF-tree + * + * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD + * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA + */ + for (i = 0; i < 4; i++){ + irq = get_pci_irq_from_of(hose, 17, i + 1); + if (irq > 0 && irq < 16) + irq2pin[irq] = PIRQA + i; + else + printk(KERN_WARNING "ULI1575 device" + "(slot %d, pin %d) irq %d is invalid.\n", + 17, i, irq); + } /* - * ALI1575 interrupts route table setup: + * PIRQE -> PIRQF mapping set manually * * IRQ pin IRQ# - * PIRQA ---- 3 - * PIRQB ---- 4 - * PIRQC ---- 5 - * PIRQD ---- 6 * PIRQE ---- 9 * PIRQF ---- 10 * PIRQG ---- 11 * PIRQH ---- 12 - * - * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD - * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA */ - pci_write_config_dword(dev, 0x48, 0xb9317542); + for (i = 0; i < 4; i++) irq2pin[i + 9] = PIRQE + i; + + /* Set IRQ-PIRQ Mapping to ULI1575 */ + for (i = 0; i < 16; i++) + if (irq2pin[i]) + pirq_map_word |= (uli1575_irq_route_table[i] & 0xf) + << ((irq2pin[i] - PIRQA) * 4); - /* USB 1.1 OHCI controller 1, interrupt: PIRQE */ - pci_write_config_byte(dev, 0x86, 0x0c); + /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */ + DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n", + pirq_map_word); + pci_write_config_dword(dev, 0x48, pirq_map_word); - /* USB 1.1 OHCI controller 2, interrupt: PIRQF */ - pci_write_config_byte(dev, 0x87, 0x0d); +#define ULI1575_SET_DEV_IRQ(slot, pin, reg) \ + do { \ + int irq; \ + irq = get_pci_irq_from_of(hose, slot, pin); \ + if (irq > 0 && irq < 16) \ + pci_write_config_byte(dev, reg, irq2pin[irq]); \ + else \ + printk(KERN_WARNING "ULI1575 device" \ + "(slot %d, pin %d) irq %d is invalid.\n", \ + slot, pin, irq); \ + } while(0) - /* USB 1.1 OHCI controller 3, interrupt: PIRQH */ - pci_write_config_byte(dev, 0x88, 0x0f); + /* USB 1.1 OHCI controller 1, slot 28, pin 1 */ + ULI1575_SET_DEV_IRQ(28, 1, 0x86); - /* USB 2.0 controller, interrupt: PIRQ7 */ - pci_write_config_byte(dev, 0x74, 0x06); + /* USB 1.1 OHCI controller 2, slot 28, pin 2 */ + ULI1575_SET_DEV_IRQ(28, 2, 0x87); - /* Audio controller, interrupt: PIRQE */ - pci_write_config_byte(dev, 0x8a, 0x0c); + /* USB 1.1 OHCI controller 3, slot 28, pin 3 */ + ULI1575_SET_DEV_IRQ(28, 3, 0x88); - /* Modem controller, interrupt: PIRQF */ - pci_write_config_byte(dev, 0x8b, 0x0d); + /* USB 2.0 controller, slot 28, pin 4 */ + irq = get_pci_irq_from_of(hose, 28, 4); + if (irq >= 0 && irq <=15) + pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]); - /* HD audio controller, interrupt: PIRQG */ - pci_write_config_byte(dev, 0x8c, 0x0e); + /* Audio controller, slot 29, pin 1 */ + ULI1575_SET_DEV_IRQ(29, 1, 0x8a); - /* Serial ATA interrupt: PIRQD */ - pci_write_config_byte(dev, 0x8d, 0x0b); + /* Modem controller, slot 29, pin 2 */ + ULI1575_SET_DEV_IRQ(29, 2, 0x8b); - /* SMB interrupt: PIRQH */ - pci_write_config_byte(dev, 0x8e, 0x0f); + /* HD audio controller, slot 29, pin 3 */ + ULI1575_SET_DEV_IRQ(29, 3, 0x8c); - /* PMU ACPI SCI interrupt: PIRQH */ - pci_write_config_byte(dev, 0x8f, 0x0f); + /* SMB interrupt: slot 30, pin 1 */ + ULI1575_SET_DEV_IRQ(30, 1, 0x8e); + + /* PMU ACPI SCI interrupt: slot 30, pin 2 */ + ULI1575_SET_DEV_IRQ(30, 2, 0x8f); + + /* Serial ATA interrupt: slot 31, pin 1 */ + ULI1575_SET_DEV_IRQ(31, 1, 0x8d); /* Primary PATA IDE IRQ: 14 * Secondary PATA IDE IRQ: 15 */ - pci_write_config_byte(dev, 0x44, 0x3d); - pci_write_config_byte(dev, 0x75, 0x0f); + pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]); + pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]); /* Set IRQ14 and IRQ15 to legacy IRQs */ pci_read_config_word(dev, 0x46, &temp); @@ -264,6 +286,8 @@ static void __devinit quirk_ali1575(struct pci_dev *dev) */ outb(0xfa, 0x4d0); outb(0x1e, 0x4d1); + +#undef ULI1575_SET_DEV_IRQ } static void __devinit quirk_uli5288(struct pci_dev *dev) @@ -306,7 +330,7 @@ static void __devinit early_uli5249(struct pci_dev *dev) dev->class |= 0x1; } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); @@ -323,9 +347,9 @@ mpc86xx_hpcn_setup_arch(void) np = of_find_node_by_type(NULL, "cpu"); if (np != 0) { - unsigned int *fp; + const unsigned int *fp; - fp = (int *)get_property(np, "clock-frequency", NULL); + fp = get_property(np, "clock-frequency", NULL); if (fp != 0) loops_per_jiffy = *fp / HZ; else @@ -337,19 +361,11 @@ mpc86xx_hpcn_setup_arch(void) for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc86xx_map_irq; ppc_md.pci_exclude_device = mpc86xx_exclude_device; #endif printk("MPC86xx HPCN board from Freescale Semiconductor\n"); -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif - #ifdef CONFIG_SMP mpc86xx_smp_init(); #endif