X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Fmips%2Falchemy%2Fdevboards%2Fdb1x00%2Fboard_setup.c;h=5c956fe8760ffc9e99c5b928eaedfb6af7ef2cbe;hb=a77febbef105554c5a37241cf903f48ab7bc03c7;hp=05f120ff90f9c244312a57f9a2619a627e9e28ab;hpb=f0a2b0cb71e652ae9f0feeea91e5320e4faf25dc;p=pandora-kernel.git

diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c
index 05f120ff90f9..5c956fe8760f 100644
--- a/arch/mips/alchemy/devboards/db1x00/board_setup.c
+++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c
@@ -127,13 +127,10 @@ const char *get_system_type(void)
 void __init board_setup(void)
 {
 	unsigned long bcsr1, bcsr2;
-	u32 pin_func;
 
 	bcsr1 = DB1000_BCSR_PHYS_ADDR;
 	bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS;
 
-	pin_func = 0;
-
 #ifdef CONFIG_MIPS_DB1000
 	printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
 #endif
@@ -164,12 +161,16 @@ void __init board_setup(void)
 	/* Not valid for Au1550 */
 #if defined(CONFIG_IRDA) && \
    (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
-	/* Set IRFIRSEL instead of GPIO15 */
-	pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
-	au_writel(pin_func, SYS_PINFUNC);
-	/* Power off until the driver is in use */
-	bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
-				BCSR_RESETS_IRDA_MODE_OFF);
+	{
+		u32 pin_func;
+
+		/* Set IRFIRSEL instead of GPIO15 */
+		pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
+		au_writel(pin_func, SYS_PINFUNC);
+		/* Power off until the driver is in use */
+		bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
+			 BCSR_RESETS_IRDA_MODE_OFF);
+	}
 #endif
 	bcsr_write(BCSR_PCMCIA, 0);	/* turn off PCMCIA power */
 
@@ -177,31 +178,35 @@ void __init board_setup(void)
 	alchemy_gpio1_input_enable();
 
 #ifdef CONFIG_MIPS_MIRAGE
-	/* GPIO[20] is output */
-	alchemy_gpio_direction_output(20, 0);
+	{
+		u32 pin_func;
 
-	/* Set GPIO[210:208] instead of SSI_0 */
-	pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
+		/* GPIO[20] is output */
+		alchemy_gpio_direction_output(20, 0);
 
-	/* Set GPIO[215:211] for LEDs */
-	pin_func |= 5 << 2;
+		/* Set GPIO[210:208] instead of SSI_0 */
+		pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
 
-	/* Set GPIO[214:213] for more LEDs */
-	pin_func |= 5 << 12;
+		/* Set GPIO[215:211] for LEDs */
+		pin_func |= 5 << 2;
 
-	/* Set GPIO[207:200] instead of PCMCIA/LCD */
-	pin_func |= SYS_PF_LCD | SYS_PF_PC;
-	au_writel(pin_func, SYS_PINFUNC);
+		/* Set GPIO[214:213] for more LEDs */
+		pin_func |= 5 << 12;
 
-	/*
-	 * Enable speaker amplifier.  This should
-	 * be part of the audio driver.
-	 */
-	alchemy_gpio_direction_output(209, 1);
+		/* Set GPIO[207:200] instead of PCMCIA/LCD */
+		pin_func |= SYS_PF_LCD | SYS_PF_PC;
+		au_writel(pin_func, SYS_PINFUNC);
 
-	pm_power_off = mirage_power_off;
-	_machine_halt = mirage_power_off;
-	_machine_restart = (void(*)(char *))mips_softreset;
+		/*
+		 * Enable speaker amplifier.  This should
+		 * be part of the audio driver.
+		 */
+		alchemy_gpio_direction_output(209, 1);
+
+		pm_power_off = mirage_power_off;
+		_machine_halt = mirage_power_off;
+		_machine_restart = (void(*)(char *))mips_softreset;
+	}
 #endif
 
 #ifdef CONFIG_MIPS_BOSPORUS