X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Fmips%2FKconfig;h=d2be3ffca2802206b1ef4955b16bf3063a08dbea;hb=e89e896d31b11a51a54ddcd3f72a76bd286dd86c;hp=8724ed3298d31f9de2dad9521126a75bb8d51298;hpb=6f58d79598c184dc4f18ceddfaa5fa7483bce0a5;p=pandora-kernel.git

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8724ed3298d3..d2be3ffca280 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -81,7 +81,9 @@ config MIPS_COBALT
 config MACH_DECSTATION
 	bool "DECstations"
 	select BOOT_ELF32
+	select CEVT_DS1287
 	select CEVT_R4K
+	select CSRC_IOASIC
 	select CSRC_R4K
 	select CPU_DADDI_WORKAROUNDS if 64BIT
 	select CPU_R4000_WORKAROUNDS if 64BIT
@@ -221,6 +223,7 @@ config MIPS_MALTA
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA
 	select IRQ_CPU
+	select IRQ_GIC
 	select HW_HAS_PCI
 	select I8253
 	select I8259
@@ -309,12 +312,12 @@ config MACH_VR41XX
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 
 config PNX8550_JBS
-	bool "Philips PNX8550 based JBS board"
+	bool "NXP PNX8550 based JBS board"
 	select PNX8550
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config PNX8550_STB810
-	bool "Philips PNX8550 based STB810 board"
+	bool "NXP PNX8550 based STB810 board"
 	select PNX8550
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
@@ -612,6 +615,7 @@ config TOSHIBA_JMR3927
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GPIO_TXX9
 
 config TOSHIBA_RBTX4927
 	bool "Toshiba RBTX49[23]7 board"
@@ -653,7 +657,7 @@ config TOSHIBA_RBTX4938
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_KGDB
 	select GENERIC_HARDIRQS_NO__DO_IRQ
-	select GENERIC_GPIO
+	select GPIO_TXX9
 	help
 	  This Toshiba board is based on the TX4938 processor. Say Y here to
 	  support this machine type
@@ -767,6 +771,9 @@ config BOOT_RAW
 config CEVT_BCM1480
 	bool
 
+config CEVT_DS1287
+	bool
+
 config CEVT_GT641XX
 	bool
 
@@ -782,12 +789,20 @@ config CEVT_TXX9
 config CSRC_BCM1480
 	bool
 
+config CSRC_IOASIC
+	bool
+
 config CSRC_R4K
 	bool
 
 config CSRC_SB1250
 	bool
 
+config GPIO_TXX9
+	select GENERIC_GPIO
+	select HAVE_GPIO_LIB
+	bool
+
 config CFE
 	bool
 
@@ -840,6 +855,9 @@ config MIPS_NILE4
 config MIPS_DISABLE_OBSOLETE_IDE
 	bool
 
+config SYNC_R4K
+	bool
+
 config NO_IOPORT
 	def_bool n
 
@@ -909,6 +927,9 @@ config IRQ_TXX9
 config IRQ_GT641XX
 	bool
 
+config IRQ_GIC
+	bool
+
 config MIPS_BOARDS_GEN
 	bool
 
@@ -985,7 +1006,7 @@ config BOOT_ELF32
 config MIPS_L1_CACHE_SHIFT
 	int
 	default "4" if MACH_DECSTATION
-	default "7" if SGI_IP27 || SGI_IP28 || SNI_RM
+	default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM
 	default "4" if PMC_MSP4200_EVAL
 	default "5"
 
@@ -1742,6 +1763,7 @@ config SMP
 	bool "Multi-Processing support"
 	depends on SYS_SUPPORTS_SMP
 	select IRQ_PER_CPU
+	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -1811,6 +1833,17 @@ config NR_CPUS
 	  performance should round up your number of processors to the next
 	  power of two.
 
+config MIPS_CMP
+	bool "MIPS CMP framework support"
+	depends on SMP
+	select SYNC_R4K
+	select SYS_SUPPORTS_SCHED_SMT
+	select WEAK_ORDERING
+	default n
+	help
+	  This is a placeholder option for the GCMP work. It will need to
+	  be handled differently...
+
 source "kernel/time/Kconfig"
 
 #