X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Fi386%2Fkernel%2Fapic.c;h=7a2c9cbdb511ebf2150a2bf172aff45621ad5f95;hb=6f8c480f998a619082f18407f8d7f4c29e94dc6e;hp=776d9be26af9ea5906bc0e04798878e69d3b51a3;hpb=40b20c257a13c5a526ac540bc5e43d0fdf29792a;p=pandora-kernel.git diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index 776d9be26af9..7a2c9cbdb511 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -25,6 +25,8 @@ #include #include #include +#include +#include #include #include @@ -44,128 +46,548 @@ #include "io_ports.h" /* - * cpu_mask that denotes the CPUs that needs timer interrupt coming in as - * IPIs in place of local APIC timers + * Sanity check */ -static cpumask_t timer_bcast_ipi; +#if (SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F +# error SPURIOUS_APIC_VECTOR definition error +#endif /* * Knob to control our willingness to enable the local APIC. + * + * -1=force-disable, +1=force-enable */ -static int enable_local_apic __initdata = 0; /* -1=force-disable, +1=force-enable */ - -static inline void lapic_disable(void) -{ - enable_local_apic = -1; - clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); -} +static int enable_local_apic __initdata = 0; -static inline void lapic_enable(void) -{ - enable_local_apic = 1; -} +/* Local APIC timer verification ok */ +static int local_apic_timer_verify_ok; /* - * Debug level + * Debug level, exported for io_apic.c */ int apic_verbosity; +static unsigned int calibration_result; +static int lapic_next_event(unsigned long delta, + struct clock_event_device *evt); +static void lapic_timer_setup(enum clock_event_mode mode, + struct clock_event_device *evt); +static void lapic_timer_broadcast(cpumask_t mask); static void apic_pm_activate(void); +/* + * The local apic timer can be used for any function which is CPU local. + */ +static struct clock_event_device lapic_clockevent = { + .name = "lapic", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT + | CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY, + .shift = 32, + .set_mode = lapic_timer_setup, + .set_next_event = lapic_next_event, + .broadcast = lapic_timer_broadcast, + .rating = 100, + .irq = -1, +}; +static DEFINE_PER_CPU(struct clock_event_device, lapic_events); + +/* Local APIC was disabled by the BIOS and enabled by the kernel */ +static int enabled_via_apicbase; + +/* + * Get the LAPIC version + */ +static inline int lapic_get_version(void) +{ + return GET_APIC_VERSION(apic_read(APIC_LVR)); +} + +/* + * Check, if the APIC is integrated or a seperate chip + */ +static inline int lapic_is_integrated(void) +{ + return APIC_INTEGRATED(lapic_get_version()); +} + +/* + * Check, whether this is a modern or a first generation APIC + */ static int modern_apic(void) { - unsigned int lvr, version; /* AMD systems use old APIC versions, so check the CPU */ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && - boot_cpu_data.x86 >= 0xf) + boot_cpu_data.x86 >= 0xf) return 1; - lvr = apic_read(APIC_LVR); - version = GET_APIC_VERSION(lvr); - return version >= 0x14; + return lapic_get_version() >= 0x14; +} + +/** + * enable_NMI_through_LVT0 - enable NMI through local vector table 0 + */ +void enable_NMI_through_LVT0 (void * dummy) +{ + unsigned int v = APIC_DM_NMI; + + /* Level triggered for 82489DX */ + if (!lapic_is_integrated()) + v |= APIC_LVT_LEVEL_TRIGGER; + apic_write_around(APIC_LVT0, v); +} + +/** + * get_physical_broadcast - Get number of physical broadcast IDs + */ +int get_physical_broadcast(void) +{ + return modern_apic() ? 0xff : 0xf; +} + +/** + * lapic_get_maxlvt - get the maximum number of local vector table entries + */ +int lapic_get_maxlvt(void) +{ + unsigned int v = apic_read(APIC_LVR); + + /* 82489DXs do not report # of LVT entries. */ + return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2; } /* - * 'what should we do if we get a hw irq event on an illegal vector'. - * each architecture has to answer this themselves. + * Local APIC timer */ -void ack_bad_irq(unsigned int irq) + +/* Clock divisor is set to 16 */ +#define APIC_DIVISOR 16 + +/* + * This function sets up the local APIC timer, with a timeout of + * 'clocks' APIC bus clock. During calibration we actually call + * this function twice on the boot CPU, once with a bogus timeout + * value, second time for real. The other (noncalibrating) CPUs + * call this function only once, with the real, calibrated value. + * + * We do reads before writes even if unnecessary, to get around the + * P5 APIC double write bug. + */ +static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) { - printk("unexpected IRQ trap at vector %02x\n", irq); + unsigned int lvtt_value, tmp_value; + + lvtt_value = LOCAL_TIMER_VECTOR; + if (!oneshot) + lvtt_value |= APIC_LVT_TIMER_PERIODIC; + if (!lapic_is_integrated()) + lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV); + + if (!irqen) + lvtt_value |= APIC_LVT_MASKED; + + apic_write_around(APIC_LVTT, lvtt_value); + /* - * Currently unexpected vectors happen only on SMP and APIC. - * We _must_ ack these because every local APIC has only N - * irq slots per priority level, and a 'hanging, unacked' IRQ - * holds up an irq slot - in excessive cases (when multiple - * unexpected vectors occur) that might lock up the APIC - * completely. - * But only ack when the APIC is enabled -AK + * Divide PICLK by 16 */ - if (cpu_has_apic) - ack_APIC_irq(); + tmp_value = apic_read(APIC_TDCR); + apic_write_around(APIC_TDCR, (tmp_value + & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) + | APIC_TDR_DIV_16); + + if (!oneshot) + apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR); } -void __init apic_intr_init(void) +/* + * Program the next event, relative to now + */ +static int lapic_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + apic_write_around(APIC_TMICT, delta); + return 0; +} + +/* + * Setup the lapic timer in periodic or oneshot mode + */ +static void lapic_timer_setup(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long flags; + unsigned int v; + + /* Lapic used for broadcast ? */ + if (!local_apic_timer_verify_ok) + return; + + local_irq_save(flags); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + case CLOCK_EVT_MODE_ONESHOT: + __setup_APIC_LVTT(calibration_result, + mode != CLOCK_EVT_MODE_PERIODIC, 1); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + v = apic_read(APIC_LVTT); + v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write_around(APIC_LVTT, v); + break; + } + + local_irq_restore(flags); +} + +/* + * Local APIC timer broadcast function + */ +static void lapic_timer_broadcast(cpumask_t mask) { #ifdef CONFIG_SMP - smp_intr_init(); + send_IPI_mask(mask, LOCAL_TIMER_VECTOR); #endif - /* self generated IPI for local APIC timer */ - set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); +} - /* IPI vectors for APIC spurious and error interrupts */ - set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); +/* + * Setup the local APIC timer for this CPU. Copy the initilized values + * of the boot CPU and register the clock event in the framework. + */ +static void __devinit setup_APIC_timer(void) +{ + struct clock_event_device *levt = &__get_cpu_var(lapic_events); - /* thermal monitor LVT interrupt */ -#ifdef CONFIG_X86_MCE_P4THERMAL - set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); -#endif + memcpy(levt, &lapic_clockevent, sizeof(*levt)); + levt->cpumask = cpumask_of_cpu(smp_processor_id()); + + clockevents_register_device(levt); } -/* Using APIC to generate smp_local_timer_interrupt? */ -int using_apic_timer __read_mostly = 0; +/* + * In this functions we calibrate APIC bus clocks to the external timer. + * + * We want to do the calibration only once since we want to have local timer + * irqs syncron. CPUs connected by the same APIC bus have the very same bus + * frequency. + * + * This was previously done by reading the PIT/HPET and waiting for a wrap + * around to find out, that a tick has elapsed. I have a box, where the PIT + * readout is broken, so it never gets out of the wait loop again. This was + * also reported by others. + * + * Monitoring the jiffies value is inaccurate and the clockevents + * infrastructure allows us to do a simple substitution of the interrupt + * handler. + * + * The calibration routine also uses the pm_timer when possible, as the PIT + * happens to run way too slow (factor 2.3 on my VAIO CoreDuo, which goes + * back to normal later in the boot process). + */ + +#define LAPIC_CAL_LOOPS (HZ/10) -static int enabled_via_apicbase; +static __initdata volatile int lapic_cal_loops = -1; +static __initdata long lapic_cal_t1, lapic_cal_t2; +static __initdata unsigned long long lapic_cal_tsc1, lapic_cal_tsc2; +static __initdata unsigned long lapic_cal_pm1, lapic_cal_pm2; +static __initdata unsigned long lapic_cal_j1, lapic_cal_j2; -void enable_NMI_through_LVT0 (void * dummy) +/* + * Temporary interrupt handler. + */ +static void __init lapic_cal_handler(struct clock_event_device *dev) { - unsigned int v, ver; + unsigned long long tsc = 0; + long tapic = apic_read(APIC_TMCCT); + unsigned long pm = acpi_pm_read_early(); - ver = apic_read(APIC_LVR); - ver = GET_APIC_VERSION(ver); - v = APIC_DM_NMI; /* unmask and set to NMI */ - if (!APIC_INTEGRATED(ver)) /* 82489DX */ - v |= APIC_LVT_LEVEL_TRIGGER; - apic_write_around(APIC_LVT0, v); + if (cpu_has_tsc) + rdtscll(tsc); + + switch (lapic_cal_loops++) { + case 0: + lapic_cal_t1 = tapic; + lapic_cal_tsc1 = tsc; + lapic_cal_pm1 = pm; + lapic_cal_j1 = jiffies; + break; + + case LAPIC_CAL_LOOPS: + lapic_cal_t2 = tapic; + lapic_cal_tsc2 = tsc; + if (pm < lapic_cal_pm1) + pm += ACPI_PM_OVRRUN; + lapic_cal_pm2 = pm; + lapic_cal_j2 = jiffies; + break; + } } -int get_physical_broadcast(void) +/* + * Setup the boot APIC + * + * Calibrate and verify the result. + */ +void __init setup_boot_APIC_clock(void) { - if (modern_apic()) - return 0xff; - else - return 0xf; + struct clock_event_device *levt = &__get_cpu_var(lapic_events); + const long pm_100ms = PMTMR_TICKS_PER_SEC/10; + const long pm_thresh = pm_100ms/100; + void (*real_handler)(struct clock_event_device *dev); + unsigned long deltaj; + long delta, deltapm; + + apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n" + "calibrating APIC timer ...\n"); + + local_irq_disable(); + + /* Replace the global interrupt handler */ + real_handler = global_clock_event->event_handler; + global_clock_event->event_handler = lapic_cal_handler; + + /* + * Setup the APIC counter to 1e9. There is no way the lapic + * can underflow in the 100ms detection time frame + */ + __setup_APIC_LVTT(1000000000, 0, 0); + + /* Let the interrupts run */ + local_irq_enable(); + + while(lapic_cal_loops <= LAPIC_CAL_LOOPS); + + local_irq_disable(); + + /* Restore the real event handler */ + global_clock_event->event_handler = real_handler; + + /* Build delta t1-t2 as apic timer counts down */ + delta = lapic_cal_t1 - lapic_cal_t2; + apic_printk(APIC_VERBOSE, "... lapic delta = %ld\n", delta); + + /* Check, if the PM timer is available */ + deltapm = lapic_cal_pm2 - lapic_cal_pm1; + apic_printk(APIC_VERBOSE, "... PM timer delta = %ld\n", deltapm); + + if (deltapm) { + unsigned long mult; + u64 res; + + mult = clocksource_hz2mult(PMTMR_TICKS_PER_SEC, 22); + + if (deltapm > (pm_100ms - pm_thresh) && + deltapm < (pm_100ms + pm_thresh)) { + apic_printk(APIC_VERBOSE, "... PM timer result ok\n"); + } else { + res = (((u64) deltapm) * mult) >> 22; + do_div(res, 1000000); + printk(KERN_WARNING "APIC calibration not consistent " + "with PM Timer: %ldms instead of 100ms\n", + (long)res); + /* Correct the lapic counter value */ + res = (((u64) delta ) * pm_100ms); + do_div(res, deltapm); + printk(KERN_INFO "APIC delta adjusted to PM-Timer: " + "%lu (%ld)\n", (unsigned long) res, delta); + delta = (long) res; + } + } + + /* Calculate the scaled math multiplication factor */ + lapic_clockevent.mult = div_sc(delta, TICK_NSEC * LAPIC_CAL_LOOPS, 32); + lapic_clockevent.max_delta_ns = + clockevent_delta2ns(0x7FFFFF, &lapic_clockevent); + lapic_clockevent.min_delta_ns = + clockevent_delta2ns(0xF, &lapic_clockevent); + + calibration_result = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS; + + apic_printk(APIC_VERBOSE, "..... delta %ld\n", delta); + apic_printk(APIC_VERBOSE, "..... mult: %ld\n", lapic_clockevent.mult); + apic_printk(APIC_VERBOSE, "..... calibration result: %u\n", + calibration_result); + + if (cpu_has_tsc) { + delta = (long)(lapic_cal_tsc2 - lapic_cal_tsc1); + apic_printk(APIC_VERBOSE, "..... CPU clock speed is " + "%ld.%04ld MHz.\n", + (delta / LAPIC_CAL_LOOPS) / (1000000 / HZ), + (delta / LAPIC_CAL_LOOPS) % (1000000 / HZ)); + } + + apic_printk(APIC_VERBOSE, "..... host bus clock speed is " + "%u.%04u MHz.\n", + calibration_result / (1000000 / HZ), + calibration_result % (1000000 / HZ)); + + + apic_printk(APIC_VERBOSE, "... verify APIC timer\n"); + + /* + * Setup the apic timer manually + */ + local_apic_timer_verify_ok = 1; + levt->event_handler = lapic_cal_handler; + lapic_timer_setup(CLOCK_EVT_MODE_PERIODIC, levt); + lapic_cal_loops = -1; + + /* Let the interrupts run */ + local_irq_enable(); + + while(lapic_cal_loops <= LAPIC_CAL_LOOPS); + + local_irq_disable(); + + /* Stop the lapic timer */ + lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, levt); + + local_irq_enable(); + + /* Jiffies delta */ + deltaj = lapic_cal_j2 - lapic_cal_j1; + apic_printk(APIC_VERBOSE, "... jiffies delta = %lu\n", deltaj); + + /* Check, if the PM timer is available */ + deltapm = lapic_cal_pm2 - lapic_cal_pm1; + apic_printk(APIC_VERBOSE, "... PM timer delta = %ld\n", deltapm); + + local_apic_timer_verify_ok = 0; + + if (deltapm) { + if (deltapm > (pm_100ms - pm_thresh) && + deltapm < (pm_100ms + pm_thresh)) { + apic_printk(APIC_VERBOSE, "... PM timer result ok\n"); + /* Check, if the jiffies result is consistent */ + if (deltaj < LAPIC_CAL_LOOPS-2 || + deltaj > LAPIC_CAL_LOOPS+2) { + /* + * Not sure, what we can do about this one. + * When high resultion timers are active + * and the lapic timer does not stop in C3 + * we are fine. Otherwise more trouble might + * be waiting. -- tglx + */ + printk(KERN_WARNING "Global event device %s " + "has wrong frequency " + "(%lu ticks instead of %d)\n", + global_clock_event->name, deltaj, + LAPIC_CAL_LOOPS); + } + local_apic_timer_verify_ok = 1; + } + } else { + /* Check, if the jiffies result is consistent */ + if (deltaj >= LAPIC_CAL_LOOPS-2 && + deltaj <= LAPIC_CAL_LOOPS+2) { + apic_printk(APIC_VERBOSE, "... jiffies result ok\n"); + local_apic_timer_verify_ok = 1; + } + } + + if (!local_apic_timer_verify_ok) { + printk(KERN_WARNING + "APIC timer disabled due to verification failure.\n"); + /* No broadcast on UP ! */ + if (num_possible_cpus() == 1) + return; + } else + lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; + + /* Setup the lapic or request the broadcast */ + setup_APIC_timer(); +} + +void __devinit setup_secondary_APIC_clock(void) +{ + setup_APIC_timer(); } -int get_maxlvt(void) +/* + * The guts of the apic timer interrupt + */ +static void local_apic_timer_interrupt(void) { - unsigned int v, ver, maxlvt; + int cpu = smp_processor_id(); + struct clock_event_device *evt = &per_cpu(lapic_events, cpu); - v = apic_read(APIC_LVR); - ver = GET_APIC_VERSION(v); - /* 82489DXs do not report # of LVT entries. */ - maxlvt = APIC_INTEGRATED(ver) ? GET_APIC_MAXLVT(v) : 2; - return maxlvt; + /* + * Normally we should not be here till LAPIC has been initialized but + * in some cases like kdump, its possible that there is a pending LAPIC + * timer interrupt from previous kernel's context and is delivered in + * new kernel the moment interrupts are enabled. + * + * Interrupts are enabled early and LAPIC is setup much later, hence + * its possible that when we get here evt->event_handler is NULL. + * Check for event_handler being NULL and discard the interrupt as + * spurious. + */ + if (!evt->event_handler) { + printk(KERN_WARNING + "Spurious LAPIC timer interrupt on cpu %d\n", cpu); + /* Switch it off */ + lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt); + return; + } + + per_cpu(irq_stat, cpu).apic_timer_irqs++; + + evt->event_handler(evt); +} + +/* + * Local APIC timer interrupt. This is the most natural way for doing + * local interrupts, but local timer interrupts can be emulated by + * broadcast interrupts too. [in case the hw doesn't support APIC timers] + * + * [ if a single-CPU system runs an SMP kernel then we call the local + * interrupt as well. Thus we cannot inline the local irq ... ] + */ + +void fastcall smp_apic_timer_interrupt(struct pt_regs *regs) +{ + struct pt_regs *old_regs = set_irq_regs(regs); + + /* + * NOTE! We'd better ACK the irq immediately, + * because timer handling can be slow. + */ + ack_APIC_irq(); + /* + * update_process_times() expects us to have done irq_enter(). + * Besides, if we don't timer interrupts ignore the global + * interrupt lock, which is the WrongThing (tm) to do. + */ + irq_enter(); + local_apic_timer_interrupt(); + irq_exit(); + + set_irq_regs(old_regs); +} + +int setup_profiling_timer(unsigned int multiplier) +{ + return -EINVAL; } +/* + * Local APIC start and shutdown + */ + +/** + * clear_local_APIC - shutdown the local APIC + * + * This is called, when a CPU is disabled and before rebooting, so the state of + * the local APIC has no dangling leftovers. Also used to cleanout any BIOS + * leftovers during boot. + */ void clear_local_APIC(void) { - int maxlvt; + int maxlvt = lapic_get_maxlvt(); unsigned long v; - maxlvt = get_maxlvt(); - /* * Masking an LVT entry can trigger a local APIC error * if the vector is zero. Mask LVTERR first to prevent this. @@ -189,7 +611,7 @@ void clear_local_APIC(void) apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED); } -/* lets not touch this if we didn't frob it */ + /* lets not touch this if we didn't frob it */ #ifdef CONFIG_X86_MCE_P4THERMAL if (maxlvt >= 5) { v = apic_read(APIC_LVTTHMR); @@ -211,90 +633,23 @@ void clear_local_APIC(void) if (maxlvt >= 5) apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED); #endif - v = GET_APIC_VERSION(apic_read(APIC_LVR)); - if (APIC_INTEGRATED(v)) { /* !82489DX */ - if (maxlvt > 3) /* Due to Pentium errata 3AP and 11AP. */ + /* Integrated APIC (!82489DX) ? */ + if (lapic_is_integrated()) { + if (maxlvt > 3) + /* Clear ESR due to Pentium errata 3AP and 11AP */ apic_write(APIC_ESR, 0); apic_read(APIC_ESR); } } -void __init connect_bsp_APIC(void) +/** + * disable_local_APIC - clear and disable the local APIC + */ +void disable_local_APIC(void) { - if (pic_mode) { - /* - * Do not trust the local APIC being empty at bootup. - */ - clear_local_APIC(); - /* - * PIC mode, enable APIC mode in the IMCR, i.e. - * connect BSP's local APIC to INT and NMI lines. - */ - apic_printk(APIC_VERBOSE, "leaving PIC mode, " - "enabling APIC mode.\n"); - outb(0x70, 0x22); - outb(0x01, 0x23); - } - enable_apic_mode(); -} + unsigned long value; -void disconnect_bsp_APIC(int virt_wire_setup) -{ - if (pic_mode) { - /* - * Put the board back into PIC mode (has an effect - * only on certain older boards). Note that APIC - * interrupts, including IPIs, won't work beyond - * this point! The only exception are INIT IPIs. - */ - apic_printk(APIC_VERBOSE, "disabling APIC mode, " - "entering PIC mode.\n"); - outb(0x70, 0x22); - outb(0x00, 0x23); - } - else { - /* Go back to Virtual Wire compatibility mode */ - unsigned long value; - - /* For the spurious interrupt use vector F, and enable it */ - value = apic_read(APIC_SPIV); - value &= ~APIC_VECTOR_MASK; - value |= APIC_SPIV_APIC_ENABLED; - value |= 0xf; - apic_write_around(APIC_SPIV, value); - - if (!virt_wire_setup) { - /* For LVT0 make it edge triggered, active high, external and enabled */ - value = apic_read(APIC_LVT0); - value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED ); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); - apic_write_around(APIC_LVT0, value); - } - else { - /* Disable LVT0 */ - apic_write_around(APIC_LVT0, APIC_LVT_MASKED); - } - - /* For LVT1 make it edge triggered, active high, nmi and enabled */ - value = apic_read(APIC_LVT1); - value &= ~( - APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); - apic_write_around(APIC_LVT1, value); - } -} - -void disable_local_APIC(void) -{ - unsigned long value; - - clear_local_APIC(); + clear_local_APIC(); /* * Disable APIC (implies clearing of registers @@ -304,14 +659,41 @@ void disable_local_APIC(void) value &= ~APIC_SPIV_APIC_ENABLED; apic_write_around(APIC_SPIV, value); + /* + * When LAPIC was disabled by the BIOS and enabled by the kernel, + * restore the disabled state. + */ if (enabled_via_apicbase) { unsigned int l, h; + rdmsr(MSR_IA32_APICBASE, l, h); l &= ~MSR_IA32_APICBASE_ENABLE; wrmsr(MSR_IA32_APICBASE, l, h); } } +/* + * If Linux enabled the LAPIC against the BIOS default disable it down before + * re-entering the BIOS on shutdown. Otherwise the BIOS may get confused and + * not power-off. Additionally clear all LVT entries before disable_local_APIC + * for the case where Linux didn't enable the LAPIC. + */ +void lapic_shutdown(void) +{ + unsigned long flags; + + if (!cpu_has_apic) + return; + + local_irq_save(flags); + clear_local_APIC(); + + if (enabled_via_apicbase) + disable_local_APIC(); + + local_irq_restore(flags); +} + /* * This is to verify that we're looking at a real local APIC. * Check these against your board if the CPUs aren't getting @@ -344,7 +726,7 @@ int __init verify_local_APIC(void) reg1 = GET_APIC_VERSION(reg0); if (reg1 == 0x00 || reg1 == 0xff) return 0; - reg1 = get_maxlvt(); + reg1 = lapic_get_maxlvt(); if (reg1 < 0x02 || reg1 == 0xff) return 0; @@ -367,10 +749,15 @@ int __init verify_local_APIC(void) return 1; } +/** + * sync_Arb_IDs - synchronize APIC bus arbitration IDs + */ void __init sync_Arb_IDs(void) { - /* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 - And not needed on AMD */ + /* + * Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not + * needed on AMD. + */ if (modern_apic()) return; /* @@ -383,14 +770,12 @@ void __init sync_Arb_IDs(void) | APIC_DM_INIT); } -extern void __error_in_apic_c (void); - /* * An initial setup of the virtual wire mode. */ void __init init_bsp_APIC(void) { - unsigned long value, ver; + unsigned long value; /* * Don't do the setup now if we have a SMP BIOS as the @@ -399,9 +784,6 @@ void __init init_bsp_APIC(void) if (smp_found_config || !cpu_has_apic) return; - value = apic_read(APIC_LVR); - ver = GET_APIC_VERSION(value); - /* * Do not trust the local APIC being empty at bootup. */ @@ -413,9 +795,10 @@ void __init init_bsp_APIC(void) value = apic_read(APIC_SPIV); value &= ~APIC_VECTOR_MASK; value |= APIC_SPIV_APIC_ENABLED; - + /* This bit is reserved on P4/Xeon and should be cleared */ - if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 15)) + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && + (boot_cpu_data.x86 == 15)) value &= ~APIC_SPIV_FOCUS_DISABLED; else value |= APIC_SPIV_FOCUS_DISABLED; @@ -427,14 +810,17 @@ void __init init_bsp_APIC(void) */ apic_write_around(APIC_LVT0, APIC_DM_EXTINT); value = APIC_DM_NMI; - if (!APIC_INTEGRATED(ver)) /* 82489DX */ + if (!lapic_is_integrated()) /* 82489DX */ value |= APIC_LVT_LEVEL_TRIGGER; apic_write_around(APIC_LVT1, value); } +/** + * setup_local_APIC - setup the local APIC + */ void __devinit setup_local_APIC(void) { - unsigned long oldvalue, value, ver, maxlvt; + unsigned long oldvalue, value, maxlvt, integrated; int i, j; /* Pound the ESR really hard over the head with a big hammer - mbligh */ @@ -445,11 +831,7 @@ void __devinit setup_local_APIC(void) apic_write(APIC_ESR, 0); } - value = apic_read(APIC_LVR); - ver = GET_APIC_VERSION(value); - - if ((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f) - __error_in_apic_c(); + integrated = lapic_is_integrated(); /* * Double-check whether this APIC is really registered. @@ -520,13 +902,10 @@ void __devinit setup_local_APIC(void) * like LRU than MRU (the short-term load is more even across CPUs). * See also the comment in end_level_ioapic_irq(). --macro */ -#if 1 + /* Enable focus processor (bit==0) */ value &= ~APIC_SPIV_FOCUS_DISABLED; -#else - /* Disable focus processor (bit==1) */ - value |= APIC_SPIV_FOCUS_DISABLED; -#endif + /* * Set spurious IRQ vector */ @@ -562,17 +941,18 @@ void __devinit setup_local_APIC(void) value = APIC_DM_NMI; else value = APIC_DM_NMI | APIC_LVT_MASKED; - if (!APIC_INTEGRATED(ver)) /* 82489DX */ + if (!integrated) /* 82489DX */ value |= APIC_LVT_LEVEL_TRIGGER; apic_write_around(APIC_LVT1, value); - if (APIC_INTEGRATED(ver) && !esr_disable) { /* !82489DX */ - maxlvt = get_maxlvt(); + if (integrated && !esr_disable) { /* !82489DX */ + maxlvt = lapic_get_maxlvt(); if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ apic_write(APIC_ESR, 0); oldvalue = apic_read(APIC_ESR); - value = ERROR_APIC_VECTOR; // enables sending errors + /* enables sending errors */ + value = ERROR_APIC_VECTOR; apic_write_around(APIC_LVTERR, value); /* * spec says clear errors after enabling vector. @@ -585,207 +965,30 @@ void __devinit setup_local_APIC(void) "vector: 0x%08lx after: 0x%08lx\n", oldvalue, value); } else { - if (esr_disable) - /* - * Something untraceble is creating bad interrupts on + if (esr_disable) + /* + * Something untraceble is creating bad interrupts on * secondary quads ... for the moment, just leave the * ESR disabled - we can't do anything useful with the * errors anyway - mbligh */ - printk("Leaving ESR disabled.\n"); - else - printk("No ESR for 82489DX.\n"); + printk(KERN_INFO "Leaving ESR disabled.\n"); + else + printk(KERN_INFO "No ESR for 82489DX.\n"); } + /* Disable the local apic timer */ + value = apic_read(APIC_LVTT); + value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write_around(APIC_LVTT, value); + setup_apic_nmi_watchdog(NULL); apic_pm_activate(); } /* - * If Linux enabled the LAPIC against the BIOS default - * disable it down before re-entering the BIOS on shutdown. - * Otherwise the BIOS may get confused and not power-off. - * Additionally clear all LVT entries before disable_local_APIC - * for the case where Linux didn't enable the LAPIC. - */ -void lapic_shutdown(void) -{ - unsigned long flags; - - if (!cpu_has_apic) - return; - - local_irq_save(flags); - clear_local_APIC(); - - if (enabled_via_apicbase) - disable_local_APIC(); - - local_irq_restore(flags); -} - -#ifdef CONFIG_PM - -static struct { - int active; - /* r/w apic fields */ - unsigned int apic_id; - unsigned int apic_taskpri; - unsigned int apic_ldr; - unsigned int apic_dfr; - unsigned int apic_spiv; - unsigned int apic_lvtt; - unsigned int apic_lvtpc; - unsigned int apic_lvt0; - unsigned int apic_lvt1; - unsigned int apic_lvterr; - unsigned int apic_tmict; - unsigned int apic_tdcr; - unsigned int apic_thmr; -} apic_pm_state; - -static int lapic_suspend(struct sys_device *dev, pm_message_t state) -{ - unsigned long flags; - int maxlvt; - - if (!apic_pm_state.active) - return 0; - - maxlvt = get_maxlvt(); - - apic_pm_state.apic_id = apic_read(APIC_ID); - apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI); - apic_pm_state.apic_ldr = apic_read(APIC_LDR); - apic_pm_state.apic_dfr = apic_read(APIC_DFR); - apic_pm_state.apic_spiv = apic_read(APIC_SPIV); - apic_pm_state.apic_lvtt = apic_read(APIC_LVTT); - if (maxlvt >= 4) - apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC); - apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0); - apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1); - apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); - apic_pm_state.apic_tmict = apic_read(APIC_TMICT); - apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); -#ifdef CONFIG_X86_MCE_P4THERMAL - if (maxlvt >= 5) - apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); -#endif - - local_irq_save(flags); - disable_local_APIC(); - local_irq_restore(flags); - return 0; -} - -static int lapic_resume(struct sys_device *dev) -{ - unsigned int l, h; - unsigned long flags; - int maxlvt; - - if (!apic_pm_state.active) - return 0; - - maxlvt = get_maxlvt(); - - local_irq_save(flags); - - /* - * Make sure the APICBASE points to the right address - * - * FIXME! This will be wrong if we ever support suspend on - * SMP! We'll need to do this as part of the CPU restore! - */ - rdmsr(MSR_IA32_APICBASE, l, h); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; - wrmsr(MSR_IA32_APICBASE, l, h); - - apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); - apic_write(APIC_ID, apic_pm_state.apic_id); - apic_write(APIC_DFR, apic_pm_state.apic_dfr); - apic_write(APIC_LDR, apic_pm_state.apic_ldr); - apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri); - apic_write(APIC_SPIV, apic_pm_state.apic_spiv); - apic_write(APIC_LVT0, apic_pm_state.apic_lvt0); - apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); -#ifdef CONFIG_X86_MCE_P4THERMAL - if (maxlvt >= 5) - apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); -#endif - if (maxlvt >= 4) - apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc); - apic_write(APIC_LVTT, apic_pm_state.apic_lvtt); - apic_write(APIC_TDCR, apic_pm_state.apic_tdcr); - apic_write(APIC_TMICT, apic_pm_state.apic_tmict); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); - apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); - local_irq_restore(flags); - return 0; -} - -/* - * This device has no shutdown method - fully functioning local APICs - * are needed on every CPU up until machine_halt/restart/poweroff. - */ - -static struct sysdev_class lapic_sysclass = { - set_kset_name("lapic"), - .resume = lapic_resume, - .suspend = lapic_suspend, -}; - -static struct sys_device device_lapic = { - .id = 0, - .cls = &lapic_sysclass, -}; - -static void __devinit apic_pm_activate(void) -{ - apic_pm_state.active = 1; -} - -static int __init init_lapic_sysfs(void) -{ - int error; - - if (!cpu_has_apic) - return 0; - /* XXX: remove suspend/resume procs if !apic_pm_state.active? */ - - error = sysdev_class_register(&lapic_sysclass); - if (!error) - error = sysdev_register(&device_lapic); - return error; -} -device_initcall(init_lapic_sysfs); - -#else /* CONFIG_PM */ - -static void apic_pm_activate(void) { } - -#endif /* CONFIG_PM */ - -/* - * Detect and enable local APICs on non-SMP boards. - * Original code written by Keir Fraser. + * Detect and initialize APIC */ - -static int __init apic_set_verbosity(char *str) -{ - if (strcmp("debug", str) == 0) - apic_verbosity = APIC_DEBUG; - else if (strcmp("verbose", str) == 0) - apic_verbosity = APIC_VERBOSE; - return 1; -} - -__setup("apic=", apic_set_verbosity); - static int __init detect_init_APIC (void) { u32 h, l, features; @@ -797,7 +1000,7 @@ static int __init detect_init_APIC (void) switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) || - (boot_cpu_data.x86 == 15)) + (boot_cpu_data.x86 == 15)) break; goto no_apic; case X86_VENDOR_INTEL: @@ -811,23 +1014,23 @@ static int __init detect_init_APIC (void) if (!cpu_has_apic) { /* - * Over-ride BIOS and try to enable the local - * APIC only if "lapic" specified. + * Over-ride BIOS and try to enable the local APIC only if + * "lapic" specified. */ if (enable_local_apic <= 0) { - printk("Local APIC disabled by BIOS -- " + printk(KERN_INFO "Local APIC disabled by BIOS -- " "you can enable it with \"lapic\"\n"); return -1; } /* - * Some BIOSes disable the local APIC in the - * APIC_BASE MSR. This can only be done in - * software for Intel P6 or later and AMD K7 - * (Model > 1) or later. + * Some BIOSes disable the local APIC in the APIC_BASE + * MSR. This can only be done in software for Intel P6 or later + * and AMD K7 (Model > 1) or later. */ rdmsr(MSR_IA32_APICBASE, l, h); if (!(l & MSR_IA32_APICBASE_ENABLE)) { - printk("Local APIC disabled by BIOS -- reenabling.\n"); + printk(KERN_INFO + "Local APIC disabled by BIOS -- reenabling.\n"); l &= ~MSR_IA32_APICBASE_BASE; l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE; wrmsr(MSR_IA32_APICBASE, l, h); @@ -840,7 +1043,7 @@ static int __init detect_init_APIC (void) */ features = cpuid_edx(1); if (!(features & (1 << X86_FEATURE_APIC))) { - printk("Could not enable APIC!\n"); + printk(KERN_WARNING "Could not enable APIC!\n"); return -1; } set_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); @@ -854,17 +1057,20 @@ static int __init detect_init_APIC (void) if (nmi_watchdog != NMI_NONE) nmi_watchdog = NMI_LOCAL_APIC; - printk("Found and enabled local APIC!\n"); + printk(KERN_INFO "Found and enabled local APIC!\n"); apic_pm_activate(); return 0; no_apic: - printk("No local APIC present or hardware disabled\n"); + printk(KERN_INFO "No local APIC present or hardware disabled\n"); return -1; } +/** + * init_apic_mappings - initialize APIC mappings + */ void __init init_apic_mappings(void) { unsigned long apic_phys; @@ -924,384 +1130,92 @@ fake_ioapic_page: } /* - * This part sets up the APIC 32 bit clock in LVTT1, with HZ interrupts - * per second. We assume that the caller has already set up the local - * APIC. - * - * The APIC timer is not exactly sync with the external timer chip, it - * closely follows bus clocks. - */ - -/* - * The timer chip is already set up at HZ interrupts per second here, - * but we do not accept timer interrupts yet. We only allow the BP - * to calibrate. + * This initializes the IO-APIC and APIC hardware if this is + * a UP kernel. */ -static unsigned int __devinit get_8254_timer_count(void) +int __init APIC_init_uniprocessor (void) { - unsigned long flags; + if (enable_local_apic < 0) + clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); - unsigned int count; - - spin_lock_irqsave(&i8253_lock, flags); - - outb_p(0x00, PIT_MODE); - count = inb_p(PIT_CH0); - count |= inb_p(PIT_CH0) << 8; - - spin_unlock_irqrestore(&i8253_lock, flags); - - return count; -} - -/* next tick in 8254 can be caught by catching timer wraparound */ -static void __devinit wait_8254_wraparound(void) -{ - unsigned int curr_count, prev_count; - - curr_count = get_8254_timer_count(); - do { - prev_count = curr_count; - curr_count = get_8254_timer_count(); - - /* workaround for broken Mercury/Neptune */ - if (prev_count >= curr_count + 0x100) - curr_count = get_8254_timer_count(); - - } while (prev_count >= curr_count); -} - -/* - * Default initialization for 8254 timers. If we use other timers like HPET, - * we override this later - */ -void (*wait_timer_tick)(void) __devinitdata = wait_8254_wraparound; - -/* - * This function sets up the local APIC timer, with a timeout of - * 'clocks' APIC bus clock. During calibration we actually call - * this function twice on the boot CPU, once with a bogus timeout - * value, second time for real. The other (noncalibrating) CPUs - * call this function only once, with the real, calibrated value. - * - * We do reads before writes even if unnecessary, to get around the - * P5 APIC double write bug. - */ - -#define APIC_DIVISOR 16 - -static void __setup_APIC_LVTT(unsigned int clocks) -{ - unsigned int lvtt_value, tmp_value, ver; - int cpu = smp_processor_id(); - - ver = GET_APIC_VERSION(apic_read(APIC_LVR)); - lvtt_value = APIC_LVT_TIMER_PERIODIC | LOCAL_TIMER_VECTOR; - if (!APIC_INTEGRATED(ver)) - lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV); - - if (cpu_isset(cpu, timer_bcast_ipi)) - lvtt_value |= APIC_LVT_MASKED; - - apic_write_around(APIC_LVTT, lvtt_value); + if (!smp_found_config && !cpu_has_apic) + return -1; /* - * Divide PICLK by 16 + * Complain if the BIOS pretends there is one. */ - tmp_value = apic_read(APIC_TDCR); - apic_write_around(APIC_TDCR, (tmp_value - & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) - | APIC_TDR_DIV_16); - - apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR); -} + if (!cpu_has_apic && + APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) { + printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n", + boot_cpu_physical_apicid); + clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); + return -1; + } -static void __devinit setup_APIC_timer(unsigned int clocks) -{ - unsigned long flags; + verify_local_APIC(); - local_irq_save(flags); + connect_bsp_APIC(); /* - * Wait for IRQ0's slice: + * Hack: In case of kdump, after a crash, kernel might be booting + * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid + * might be zero if read from MP tables. Get it from LAPIC. */ - wait_timer_tick(); +#ifdef CONFIG_CRASH_DUMP + boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); +#endif + phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); - __setup_APIC_LVTT(clocks); + setup_local_APIC(); - local_irq_restore(flags); +#ifdef CONFIG_X86_IO_APIC + if (smp_found_config) + if (!skip_ioapic_setup && nr_ioapics) + setup_IO_APIC(); +#endif + setup_boot_clock(); + + return 0; } /* - * In this function we calibrate APIC bus clocks to the external - * timer. Unfortunately we cannot use jiffies and the timer irq - * to calibrate, since some later bootup code depends on getting - * the first irq? Ugh. - * - * We want to do the calibration only once since we - * want to have local timer irqs syncron. CPUs connected - * by the same APIC bus have the very same bus frequency. - * And we want to have irqs off anyways, no accidental - * APIC irq that way. + * APIC command line parameters */ - -static int __init calibrate_APIC_clock(void) -{ - unsigned long long t1 = 0, t2 = 0; - long tt1, tt2; - long result; - int i; - const int LOOPS = HZ/10; - - apic_printk(APIC_VERBOSE, "calibrating APIC timer ...\n"); - - /* - * Put whatever arbitrary (but long enough) timeout - * value into the APIC clock, we just want to get the - * counter running for calibration. - */ - __setup_APIC_LVTT(1000000000); - - /* - * The timer chip counts down to zero. Let's wait - * for a wraparound to start exact measurement: - * (the current tick might have been already half done) - */ - - wait_timer_tick(); - - /* - * We wrapped around just now. Let's start: - */ - if (cpu_has_tsc) - rdtscll(t1); - tt1 = apic_read(APIC_TMCCT); - - /* - * Let's wait LOOPS wraprounds: - */ - for (i = 0; i < LOOPS; i++) - wait_timer_tick(); - - tt2 = apic_read(APIC_TMCCT); - if (cpu_has_tsc) - rdtscll(t2); - - /* - * The APIC bus clock counter is 32 bits only, it - * might have overflown, but note that we use signed - * longs, thus no extra care needed. - * - * underflown to be exact, as the timer counts down ;) - */ - - result = (tt1-tt2)*APIC_DIVISOR/LOOPS; - - if (cpu_has_tsc) - apic_printk(APIC_VERBOSE, "..... CPU clock speed is " - "%ld.%04ld MHz.\n", - ((long)(t2-t1)/LOOPS)/(1000000/HZ), - ((long)(t2-t1)/LOOPS)%(1000000/HZ)); - - apic_printk(APIC_VERBOSE, "..... host bus clock speed is " - "%ld.%04ld MHz.\n", - result/(1000000/HZ), - result%(1000000/HZ)); - - return result; -} - -static unsigned int calibration_result; - -void __init setup_boot_APIC_clock(void) -{ - unsigned long flags; - apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"); - using_apic_timer = 1; - - local_irq_save(flags); - - calibration_result = calibrate_APIC_clock(); - /* - * Now set up the timer for real. - */ - setup_APIC_timer(calibration_result); - - local_irq_restore(flags); -} - -void __devinit setup_secondary_APIC_clock(void) -{ - setup_APIC_timer(calibration_result); -} - -void disable_APIC_timer(void) +static int __init parse_lapic(char *arg) { - if (using_apic_timer) { - unsigned long v; - - v = apic_read(APIC_LVTT); - /* - * When an illegal vector value (0-15) is written to an LVT - * entry and delivery mode is Fixed, the APIC may signal an - * illegal vector error, with out regard to whether the mask - * bit is set or whether an interrupt is actually seen on input. - * - * Boot sequence might call this function when the LVTT has - * '0' vector value. So make sure vector field is set to - * valid value. - */ - v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); - apic_write_around(APIC_LVTT, v); - } + enable_local_apic = 1; + return 0; } +early_param("lapic", parse_lapic); -void enable_APIC_timer(void) +static int __init parse_nolapic(char *arg) { - int cpu = smp_processor_id(); - - if (using_apic_timer && - !cpu_isset(cpu, timer_bcast_ipi)) { - unsigned long v; - - v = apic_read(APIC_LVTT); - apic_write_around(APIC_LVTT, v & ~APIC_LVT_MASKED); - } + enable_local_apic = -1; + clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); + return 0; } +early_param("nolapic", parse_nolapic); -void switch_APIC_timer_to_ipi(void *cpumask) +static int __init apic_set_verbosity(char *str) { - cpumask_t mask = *(cpumask_t *)cpumask; - int cpu = smp_processor_id(); - - if (cpu_isset(cpu, mask) && - !cpu_isset(cpu, timer_bcast_ipi)) { - disable_APIC_timer(); - cpu_set(cpu, timer_bcast_ipi); - } + if (strcmp("debug", str) == 0) + apic_verbosity = APIC_DEBUG; + else if (strcmp("verbose", str) == 0) + apic_verbosity = APIC_VERBOSE; + return 1; } -EXPORT_SYMBOL(switch_APIC_timer_to_ipi); - -void switch_ipi_to_APIC_timer(void *cpumask) -{ - cpumask_t mask = *(cpumask_t *)cpumask; - int cpu = smp_processor_id(); - if (cpu_isset(cpu, mask) && - cpu_isset(cpu, timer_bcast_ipi)) { - cpu_clear(cpu, timer_bcast_ipi); - enable_APIC_timer(); - } -} -EXPORT_SYMBOL(switch_ipi_to_APIC_timer); +__setup("apic=", apic_set_verbosity); -#undef APIC_DIVISOR /* - * Local timer interrupt handler. It does both profiling and - * process statistics/rescheduling. - * - * We do profiling in every local tick, statistics/rescheduling - * happen only every 'profiling multiplier' ticks. The default - * multiplier is 1 and it can be changed by writing the new multiplier - * value into /proc/profile. + * Local APIC interrupts */ -inline void smp_local_timer_interrupt(void) -{ - profile_tick(CPU_PROFILING); -#ifdef CONFIG_SMP - update_process_times(user_mode_vm(get_irq_regs())); -#endif - - /* - * We take the 'long' return path, and there every subsystem - * grabs the apropriate locks (kernel lock/ irq lock). - * - * we might want to decouple profiling from the 'long path', - * and do the profiling totally in assembly. - * - * Currently this isn't too much of an issue (performance wise), - * we can take more than 100K local irqs per second on a 100 MHz P5. - */ -} - -/* - * Local APIC timer interrupt. This is the most natural way for doing - * local interrupts, but local timer interrupts can be emulated by - * broadcast interrupts too. [in case the hw doesn't support APIC timers] - * - * [ if a single-CPU system runs an SMP kernel then we call the local - * interrupt as well. Thus we cannot inline the local irq ... ] - */ - -fastcall void smp_apic_timer_interrupt(struct pt_regs *regs) -{ - struct pt_regs *old_regs = set_irq_regs(regs); - int cpu = smp_processor_id(); - - /* - * the NMI deadlock-detector uses this. - */ - per_cpu(irq_stat, cpu).apic_timer_irqs++; - - /* - * NOTE! We'd better ACK the irq immediately, - * because timer handling can be slow. - */ - ack_APIC_irq(); - /* - * update_process_times() expects us to have done irq_enter(). - * Besides, if we don't timer interrupts ignore the global - * interrupt lock, which is the WrongThing (tm) to do. - */ - irq_enter(); - smp_local_timer_interrupt(); - irq_exit(); - set_irq_regs(old_regs); -} - -#ifndef CONFIG_SMP -static void up_apic_timer_interrupt_call(void) -{ - int cpu = smp_processor_id(); - - /* - * the NMI deadlock-detector uses this. - */ - per_cpu(irq_stat, cpu).apic_timer_irqs++; - - smp_local_timer_interrupt(); -} -#endif - -void smp_send_timer_broadcast_ipi(void) -{ - cpumask_t mask; - - cpus_and(mask, cpu_online_map, timer_bcast_ipi); - if (!cpus_empty(mask)) { -#ifdef CONFIG_SMP - send_IPI_mask(mask, LOCAL_TIMER_VECTOR); -#else - /* - * We can directly call the apic timer interrupt handler - * in UP case. Minus all irq related functions - */ - up_apic_timer_interrupt_call(); -#endif - } -} - -int setup_profiling_timer(unsigned int multiplier) -{ - return -EINVAL; -} - /* * This interrupt should _never_ happen with our APIC/SMP architecture */ -fastcall void smp_spurious_interrupt(struct pt_regs *regs) +void smp_spurious_interrupt(struct pt_regs *regs) { unsigned long v; @@ -1316,16 +1230,15 @@ fastcall void smp_spurious_interrupt(struct pt_regs *regs) ack_APIC_irq(); /* see sw-dev-man vol 3, chapter 7.4.13.5 */ - printk(KERN_INFO "spurious APIC interrupt on CPU#%d, should never happen.\n", - smp_processor_id()); + printk(KERN_INFO "spurious APIC interrupt on CPU#%d, " + "should never happen.\n", smp_processor_id()); irq_exit(); } /* * This interrupt should never happen with our APIC/SMP architecture */ - -fastcall void smp_error_interrupt(struct pt_regs *regs) +void smp_error_interrupt(struct pt_regs *regs) { unsigned long v, v1; @@ -1348,69 +1261,261 @@ fastcall void smp_error_interrupt(struct pt_regs *regs) 7: Illegal register address */ printk (KERN_DEBUG "APIC error on CPU%d: %02lx(%02lx)\n", - smp_processor_id(), v , v1); + smp_processor_id(), v , v1); irq_exit(); } /* - * This initializes the IO-APIC and APIC hardware if this is - * a UP kernel. + * Initialize APIC interrupts */ -int __init APIC_init_uniprocessor (void) +void __init apic_intr_init(void) { - if (enable_local_apic < 0) - clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); +#ifdef CONFIG_SMP + smp_intr_init(); +#endif + /* self generated IPI for local APIC timer */ + set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - if (!smp_found_config && !cpu_has_apic) - return -1; + /* IPI vectors for APIC spurious and error interrupts */ + set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - /* - * Complain if the BIOS pretends there is one. - */ - if (!cpu_has_apic && APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) { - printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n", - boot_cpu_physical_apicid); - clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); - return -1; + /* thermal monitor LVT interrupt */ +#ifdef CONFIG_X86_MCE_P4THERMAL + set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); +#endif +} + +/** + * connect_bsp_APIC - attach the APIC to the interrupt system + */ +void __init connect_bsp_APIC(void) +{ + if (pic_mode) { + /* + * Do not trust the local APIC being empty at bootup. + */ + clear_local_APIC(); + /* + * PIC mode, enable APIC mode in the IMCR, i.e. connect BSP's + * local APIC to INT and NMI lines. + */ + apic_printk(APIC_VERBOSE, "leaving PIC mode, " + "enabling APIC mode.\n"); + outb(0x70, 0x22); + outb(0x01, 0x23); } + enable_apic_mode(); +} - verify_local_APIC(); +/** + * disconnect_bsp_APIC - detach the APIC from the interrupt system + * @virt_wire_setup: indicates, whether virtual wire mode is selected + * + * Virtual wire mode is necessary to deliver legacy interrupts even when the + * APIC is disabled. + */ +void disconnect_bsp_APIC(int virt_wire_setup) +{ + if (pic_mode) { + /* + * Put the board back into PIC mode (has an effect only on + * certain older boards). Note that APIC interrupts, including + * IPIs, won't work beyond this point! The only exception are + * INIT IPIs. + */ + apic_printk(APIC_VERBOSE, "disabling APIC mode, " + "entering PIC mode.\n"); + outb(0x70, 0x22); + outb(0x00, 0x23); + } else { + /* Go back to Virtual Wire compatibility mode */ + unsigned long value; - connect_bsp_APIC(); + /* For the spurious interrupt use vector F, and enable it */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + value |= APIC_SPIV_APIC_ENABLED; + value |= 0xf; + apic_write_around(APIC_SPIV, value); - /* - * Hack: In case of kdump, after a crash, kernel might be booting - * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid - * might be zero if read from MP tables. Get it from LAPIC. - */ -#ifdef CONFIG_CRASH_DUMP - boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); -#endif - phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); + if (!virt_wire_setup) { + /* + * For LVT0 make it edge triggered, active high, + * external and enabled + */ + value = apic_read(APIC_LVT0); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED ); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); + apic_write_around(APIC_LVT0, value); + } else { + /* Disable LVT0 */ + apic_write_around(APIC_LVT0, APIC_LVT_MASKED); + } - setup_local_APIC(); + /* + * For LVT1 make it edge triggered, active high, nmi and + * enabled + */ + value = apic_read(APIC_LVT1); + value &= ~( + APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); + apic_write_around(APIC_LVT1, value); + } +} -#ifdef CONFIG_X86_IO_APIC - if (smp_found_config) - if (!skip_ioapic_setup && nr_ioapics) - setup_IO_APIC(); +/* + * Power management + */ +#ifdef CONFIG_PM + +static struct { + int active; + /* r/w apic fields */ + unsigned int apic_id; + unsigned int apic_taskpri; + unsigned int apic_ldr; + unsigned int apic_dfr; + unsigned int apic_spiv; + unsigned int apic_lvtt; + unsigned int apic_lvtpc; + unsigned int apic_lvt0; + unsigned int apic_lvt1; + unsigned int apic_lvterr; + unsigned int apic_tmict; + unsigned int apic_tdcr; + unsigned int apic_thmr; +} apic_pm_state; + +static int lapic_suspend(struct sys_device *dev, pm_message_t state) +{ + unsigned long flags; + int maxlvt; + + if (!apic_pm_state.active) + return 0; + + maxlvt = lapic_get_maxlvt(); + + apic_pm_state.apic_id = apic_read(APIC_ID); + apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI); + apic_pm_state.apic_ldr = apic_read(APIC_LDR); + apic_pm_state.apic_dfr = apic_read(APIC_DFR); + apic_pm_state.apic_spiv = apic_read(APIC_SPIV); + apic_pm_state.apic_lvtt = apic_read(APIC_LVTT); + if (maxlvt >= 4) + apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC); + apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0); + apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1); + apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); + apic_pm_state.apic_tmict = apic_read(APIC_TMICT); + apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); +#ifdef CONFIG_X86_MCE_P4THERMAL + if (maxlvt >= 5) + apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); #endif - setup_boot_APIC_clock(); + local_irq_save(flags); + disable_local_APIC(); + local_irq_restore(flags); return 0; } -static int __init parse_lapic(char *arg) +static int lapic_resume(struct sys_device *dev) { - lapic_enable(); + unsigned int l, h; + unsigned long flags; + int maxlvt; + + if (!apic_pm_state.active) + return 0; + + maxlvt = lapic_get_maxlvt(); + + local_irq_save(flags); + + /* + * Make sure the APICBASE points to the right address + * + * FIXME! This will be wrong if we ever support suspend on + * SMP! We'll need to do this as part of the CPU restore! + */ + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; + wrmsr(MSR_IA32_APICBASE, l, h); + + apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); + apic_write(APIC_ID, apic_pm_state.apic_id); + apic_write(APIC_DFR, apic_pm_state.apic_dfr); + apic_write(APIC_LDR, apic_pm_state.apic_ldr); + apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri); + apic_write(APIC_SPIV, apic_pm_state.apic_spiv); + apic_write(APIC_LVT0, apic_pm_state.apic_lvt0); + apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); +#ifdef CONFIG_X86_MCE_P4THERMAL + if (maxlvt >= 5) + apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); +#endif + if (maxlvt >= 4) + apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc); + apic_write(APIC_LVTT, apic_pm_state.apic_lvtt); + apic_write(APIC_TDCR, apic_pm_state.apic_tdcr); + apic_write(APIC_TMICT, apic_pm_state.apic_tmict); + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); + apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); + local_irq_restore(flags); return 0; } -early_param("lapic", parse_lapic); -static int __init parse_nolapic(char *arg) +/* + * This device has no shutdown method - fully functioning local APICs + * are needed on every CPU up until machine_halt/restart/poweroff. + */ + +static struct sysdev_class lapic_sysclass = { + set_kset_name("lapic"), + .resume = lapic_resume, + .suspend = lapic_suspend, +}; + +static struct sys_device device_lapic = { + .id = 0, + .cls = &lapic_sysclass, +}; + +static void __devinit apic_pm_activate(void) { - lapic_disable(); - return 0; + apic_pm_state.active = 1; } -early_param("nolapic", parse_nolapic); +static int __init init_lapic_sysfs(void) +{ + int error; + + if (!cpu_has_apic) + return 0; + /* XXX: remove suspend/resume procs if !apic_pm_state.active? */ + + error = sysdev_class_register(&lapic_sysclass); + if (!error) + error = sysdev_register(&device_lapic); + return error; +} +device_initcall(init_lapic_sysfs); + +#else /* CONFIG_PM */ + +static void apic_pm_activate(void) { } + +#endif /* CONFIG_PM */