X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Fblackfin%2Fmach-bf533%2Fboards%2Fstamp.c;h=43224ef00b8cddff96024a89d791e08cfe39a9db;hb=a5db219f4cf9f67995eabd53b81a1232c82f5852;hp=b3b1cdea27037941cff53d79c790ecc26da1f905;hpb=1693ed284f14a288c29f7265f9d71103e4c10821;p=pandora-kernel.git

diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index b3b1cdea2703..43224ef00b8c 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -24,7 +24,6 @@
 #include <asm/reboot.h>
 #include <asm/portmux.h>
 #include <asm/dpmc.h>
-#include <mach/fio_flag.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -354,7 +353,7 @@ static struct resource bfin_uart0_resources[] = {
 	},
 };
 
-unsigned short bfin_uart0_peripherals[] = {
+static unsigned short bfin_uart0_peripherals[] = {
 	P_UART0_TX, P_UART0_RX, 0
 };
 
@@ -419,9 +418,9 @@ static struct resource bfin_sport0_uart_resources[] = {
 	},
 };
 
-unsigned short bfin_sport0_peripherals[] = {
+static unsigned short bfin_sport0_peripherals[] = {
 	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
-	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
 };
 
 static struct platform_device bfin_sport0_uart_device = {
@@ -453,9 +452,9 @@ static struct resource bfin_sport1_uart_resources[] = {
 	},
 };
 
-unsigned short bfin_sport1_peripherals[] = {
+static unsigned short bfin_sport1_peripherals[] = {
 	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
-	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
@@ -674,10 +673,16 @@ static int __init stamp_init(void)
 		return ret;
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-	/* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */
-	bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0);
-	bfin_write_FIO_FLAG_S(PF0);
-	SSYNC();
+	/*
+	 * setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC.
+	 * the bfin-async-map driver takes care of flipping between
+	 * flash and ethernet when necessary.
+	 */
+	ret = gpio_request(GPIO_PF0, "enet_cpld");
+	if (!ret) {
+		gpio_direction_output(GPIO_PF0, 1);
+		gpio_free(GPIO_PF0);
+	}
 #endif
 
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
@@ -713,7 +718,6 @@ void __init native_machine_early_platform_add_devices(void)
 void native_machine_restart(char *cmd)
 {
 	/* workaround pull up on cpld / flash pin not being strong enough */
-	bfin_write_FIO_INEN(~PF0);
-	bfin_write_FIO_DIR(PF0);
-	bfin_write_FIO_FLAG_C(PF0);
+	gpio_request(GPIO_PF0, "flash_cpld");
+	gpio_direction_output(GPIO_PF0, 0);
 }