X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Farm%2Fmach-omap2%2Fboard-overo.c;h=5b78a87217e056754ccd08a0f3c7bd7280cf9448;hb=82062e7b50280bcf0feca70ac35a44f375602976;hp=9917d2fddc2f6093025ffa9979e31d8aa1d4ac21;hpb=efd44318157009274fa5962d60167ecfb954e246;p=pandora-kernel.git

diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 9917d2fddc2f..d192dd98a591 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -26,7 +26,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
 
 #include <linux/mtd/mtd.h>
@@ -38,15 +38,15 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/board.h>
+#include <plat/common.h>
 #include <mach/gpio.h>
-#include <mach/gpmc.h>
+#include <plat/gpmc.h>
 #include <mach/hardware.h>
-#include <mach/nand.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
+#include <plat/nand.h>
+#include <plat/usb.h>
 
+#include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
@@ -67,7 +67,7 @@
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 
-#include <mach/mcspi.h>
+#include <plat/mcspi.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
@@ -329,6 +329,15 @@ static struct regulator_init_data overo_vmmc1 = {
 	.consumer_supplies	= &overo_vmmc1_supply,
 };
 
+static struct twl4030_codec_audio_data overo_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data overo_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &overo_audio_data,
+};
+
 /* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
 
 static struct twl4030_platform_data overo_twldata = {
@@ -336,6 +345,7 @@ static struct twl4030_platform_data overo_twldata = {
 	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &overo_gpio_data,
 	.usb		= &overo_usb_data,
+	.codec		= &overo_codec_data,
 	.vmmc1		= &overo_vmmc1,
 };
 
@@ -384,19 +394,40 @@ static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
 
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = OVERO_GPIO_USBH_NRESET,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init overo_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	overo_i2c_init();
 	platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
 	omap_serial_init();
 	overo_flash_init();
 	usb_musb_init();
+	usb_ehci_init(&ehci_pdata);
 	overo_ads7846_init();
 	overo_init_smsc911x();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_cfg_reg(H16_34XX_SDRC_CKE0);
-	omap_cfg_reg(H17_34XX_SDRC_CKE1);
+	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 
 	if ((gpio_request(OVERO_GPIO_W2W_NRESET,
 			  "OVERO_GPIO_W2W_NRESET") == 0) &&
@@ -433,14 +464,6 @@ static void __init overo_init(void)
 	else
 		printk(KERN_ERR "could not obtain gpio for "
 					"OVERO_GPIO_USBH_CPEN\n");
-
-	if ((gpio_request(OVERO_GPIO_USBH_NRESET,
-			  "OVERO_GPIO_USBH_NRESET") == 0) &&
-	    (gpio_direction_output(OVERO_GPIO_USBH_NRESET, 1) == 0))
-		gpio_export(OVERO_GPIO_USBH_NRESET, 0);
-	else
-		printk(KERN_ERR "could not obtain gpio for "
-					"OVERO_GPIO_USBH_NRESET\n");
 }
 
 static void __init overo_map_io(void)
@@ -451,7 +474,7 @@ static void __init overo_map_io(void)
 
 MACHINE_START(OVERO, "Gumstix Overo")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= overo_map_io,
 	.init_irq	= overo_init_irq,