X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Farm%2Fmach-imx%2Fmach-pca100.c;h=63e182556778ad97ebb8a0b8e1f1100fc1449b8c;hb=56a9ccb7ba5ffd5f285e3a9628cb446192c8639c;hp=cccc0a0a9c726296085905d27498739577e71e32;hpb=97eb3f24352ec6632c2127b35d8087d2a809a9b9;p=pandora-kernel.git

diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index cccc0a0a9c72..63e182556778 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -187,7 +187,6 @@ static struct i2c_board_info pca100_i2c_devices[] = {
 	}
 };
 
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 static struct spi_eeprom at25320 = {
 	.name		= "at25320an",
 	.byte_len	= 4096,
@@ -211,7 +210,6 @@ static const struct spi_imx_master pca100_spi0_data __initconst = {
 	.chipselect	= pca100_spi_cs,
 	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
 };
-#endif
 
 static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
 {
@@ -269,31 +267,33 @@ static const struct imxmmc_platform_data sdhc_pdata __initconst = {
 	.exit = pca100_sdhc2_exit,
 };
 
-#if defined(CONFIG_USB_ULPI)
 static int otg_phy_init(struct platform_device *pdev)
 {
 	gpio_set_value(OTG_PHY_CS_GPIO, 0);
-	return 0;
+
+	mdelay(10);
+
+	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
 }
 
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
 	.init	= otg_phy_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
 static int usbh2_phy_init(struct platform_device *pdev)
 {
 	gpio_set_value(USBH2_PHY_CS_GPIO, 0);
-	return 0;
+
+	mdelay(10);
+
+	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
 }
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init	= usbh2_phy_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
-#endif
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -389,36 +389,33 @@ static void __init pca100_init(void)
 
 	imx27_add_imx_i2c(1, &pca100_i2c1_data);
 
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN);
 	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN);
 	spi_register_board_info(pca100_spi_board_info,
 				ARRAY_SIZE(pca100_spi_board_info));
 	imx27_add_spi_imx0(&pca100_spi0_data);
-#endif
 
 	gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
 	gpio_direction_output(OTG_PHY_CS_GPIO, 1);
 	gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
 	gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
 
-#if defined(CONFIG_USB_ULPI)
 	if (otg_mode_host) {
-		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+				ULPI_OTG_DRVVBUS_EXT);
 
-		imx27_add_mxc_ehci_otg(&otg_pdata);
+		if (otg_pdata.otg)
+			imx27_add_mxc_ehci_otg(&otg_pdata);
+	} else {
+		gpio_set_value(OTG_PHY_CS_GPIO, 0);
+		imx27_add_fsl_usb2_udc(&otg_device_pdata);
 	}
 
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-	imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
-	if (!otg_mode_host) {
-		gpio_set_value(OTG_PHY_CS_GPIO, 0);
-		imx27_add_fsl_usb2_udc(&otg_device_pdata);
-	}
+	if (usbh2_pdata.otg)
+		imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
 
 	imx27_add_imx_fb(&pca100_fb_data);
 
@@ -437,10 +434,10 @@ static struct sys_timer pca100_timer = {
 };
 
 MACHINE_START(PCA100, "phyCARD-i.MX27")
-	.boot_params    = MX27_PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = pca100_init,
-	.timer          = &pca100_timer,
+	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.map_io = mx27_map_io,
+	.init_early = imx27_init_early,
+	.init_irq = mx27_init_irq,
+	.init_machine = pca100_init,
+	.timer = &pca100_timer,
 MACHINE_END
-