X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Farm%2FKconfig.debug;h=df3eb3ccd7693564cf72098d107b29cc055c8d2a;hb=2cbb6160b56038aad0ce0b05bed7a75d6f086171;hp=81cbe40c159c63c20968d224f960d3d353509946;hpb=219f358e0ba9a98640341e030533089860af1cc6;p=pandora-kernel.git diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 81cbe40c159c..c5213e78606b 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -65,13 +65,190 @@ config DEBUG_USER # These options are only for real kernel hackers who want to get their hands dirty. config DEBUG_LL - bool "Kernel low-level debugging functions" + bool "Kernel low-level debugging functions (read help!)" depends on DEBUG_KERNEL help Say Y here to include definitions of printascii, printch, printhex in the kernel. This is helpful if you are debugging code that executes before the console is initialized. + Note that selecting this option will limit the kernel to a single + UART definition, as specified below. Attempting to boot the kernel + image on a different platform *will not work*, so this option should + not be enabled for kernels that are intended to be portable. + +choice + prompt "Kernel low-level debugging port" + depends on DEBUG_LL + + config DEBUG_LL_UART_NONE + bool "No low-level debugging UART" + help + Say Y here if your platform doesn't provide a UART option + below. This relies on your platform choosing the right UART + definition internally in order for low-level debugging to + work. + + config DEBUG_ICEDCC + bool "Kernel low-level debugging via EmbeddedICE DCC channel" + help + Say Y here if you want the debug print routines to direct + their output to the EmbeddedICE macrocell's DCC channel using + co-processor 14. This is known to work on the ARM9 style ICE + channel and on the XScale with the PEEDI. + + Note that the system will appear to hang during boot if there + is nothing connected to read from the DCC. + + config DEBUG_FOOTBRIDGE_COM1 + bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the 8250 at PCI COM1. + + config DEBUG_DC21285_PORT + bool "Kernel low-level debugging messages via footbridge serial port" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the serial port in the DC21285 (Footbridge). + + config DEBUG_CLPS711X_UART1 + bool "Kernel low-level debugging messages via UART1" + depends on ARCH_CLPS711X + help + Say Y here if you want the debug print routines to direct + their output to the first serial port on these devices. + + config DEBUG_CLPS711X_UART2 + bool "Kernel low-level debugging messages via UART2" + depends on ARCH_CLPS711X + help + Say Y here if you want the debug print routines to direct + their output to the second serial port on these devices. + + config DEBUG_HIGHBANK_UART + bool "Kernel low-level debugging messages via Highbank UART" + depends on ARCH_HIGHBANK + help + Say Y here if you want the debug print routines to direct + their output to the UART on Highbank based devices. + + config DEBUG_IMX1_UART + bool "i.MX1 Debug UART" + depends on SOC_IMX1 + help + Say Y here if you want kernel low-level debugging support + on i.MX1. + + config DEBUG_IMX23_UART + bool "i.MX23 Debug UART" + depends on SOC_IMX23 + help + Say Y here if you want kernel low-level debugging support + on i.MX23. + + config DEBUG_IMX25_UART + bool "i.MX25 Debug UART" + depends on SOC_IMX25 + help + Say Y here if you want kernel low-level debugging support + on i.MX25. + + config DEBUG_IMX21_IMX27_UART + bool "i.MX21 and i.MX27 Debug UART" + depends on SOC_IMX21 || SOC_IMX27 + help + Say Y here if you want kernel low-level debugging support + on i.MX21 or i.MX27. + + config DEBUG_IMX28_UART + bool "i.MX28 Debug UART" + depends on SOC_IMX28 + help + Say Y here if you want kernel low-level debugging support + on i.MX28. + + config DEBUG_IMX31_IMX35_UART + bool "i.MX31 and i.MX35 Debug UART" + depends on SOC_IMX31 || SOC_IMX35 + help + Say Y here if you want kernel low-level debugging support + on i.MX31 or i.MX35. + + config DEBUG_IMX51_UART + bool "i.MX51 Debug UART" + depends on SOC_IMX51 + help + Say Y here if you want kernel low-level debugging support + on i.MX51. + + config DEBUG_IMX50_IMX53_UART + bool "i.MX50 and i.MX53 Debug UART" + depends on SOC_IMX50 || SOC_IMX53 + help + Say Y here if you want kernel low-level debugging support + on i.MX50 or i.MX53. + + config DEBUG_IMX6Q_UART + bool "i.MX6Q Debug UART" + depends on SOC_IMX6Q + help + Say Y here if you want kernel low-level debugging support + on i.MX6Q. + + config DEBUG_S3C_UART0 + depends on PLAT_SAMSUNG + bool "Use S3C UART 0 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 0. The port must have been initialised + by the boot-loader before use. + + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_S3C_UART1 + depends on PLAT_SAMSUNG + bool "Use S3C UART 1 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 1. The port must have been initialised + by the boot-loader before use. + + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_S3C_UART2 + depends on PLAT_SAMSUNG + bool "Use S3C UART 2 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 2. The port must have been initialised + by the boot-loader before use. + + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_REALVIEW_STD_PORT + bool "RealView Default UART" + depends on ARCH_REALVIEW + help + Say Y here if you want the debug print routines to direct + their output to the serial port on RealView EB, PB11MP, PBA8 + and PBX platforms. + + config DEBUG_REALVIEW_PB1176_PORT + bool "RealView PB1176 UART" + depends on MACH_REALVIEW_PB1176 + help + Say Y here if you want the debug print routines to direct + their output to the standard serial port on the RealView + PB1176 platform. + +endchoice + config EARLY_PRINTK bool "Early printk" depends on DEBUG_LL @@ -80,53 +257,18 @@ config EARLY_PRINTK kernel low-level debugging functions. Add earlyprintk to your kernel parameters to enable this console. -config DEBUG_ICEDCC - bool "Kernel low-level debugging via EmbeddedICE DCC channel" - depends on DEBUG_LL - help - Say Y here if you want the debug print routines to direct their - output to the EmbeddedICE macrocell's DCC channel using - co-processor 14. This is known to work on the ARM9 style ICE - channel and on the XScale with the PEEDI. - - It does include a timeout to ensure that the system does not - totally freeze when there is nothing connected to read. - config OC_ETM bool "On-chip ETM and ETB" - select ARM_AMBA + depends on ARM_AMBA help Enables the on-chip embedded trace macrocell and embedded trace buffer driver that will allow you to collect traces of the kernel code. -config DEBUG_DC21285_PORT - bool "Kernel low-level debugging messages via footbridge serial port" - depends on DEBUG_LL && FOOTBRIDGE - help - Say Y here if you want the debug print routines to direct their - output to the serial port in the DC21285 (Footbridge). Saying N - will cause the debug messages to appear on the first 16550 - serial port. - -config DEBUG_CLPS711X_UART2 - bool "Kernel low-level debugging messages via UART2" - depends on DEBUG_LL && ARCH_CLPS711X +config ARM_KPROBES_TEST + tristate "Kprobes test module" + depends on KPROBES && MODULES help - Say Y here if you want the debug print routines to direct their - output to the second serial port on these devices. Saying N will - cause the debug messages to appear on the first serial port. - -config DEBUG_S3C_UART - depends on PLAT_SAMSUNG - int "S3C UART to use for low-level debug" - default "0" - help - Choice for UART for kernel low-level using S3C UARTS, - should be between zero and two. The port must have been - initialised by the boot-loader before use. - - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. + Perform tests of kprobes API and instruction set simulation. endmenu