X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=arch%2Farm%2FKconfig;h=66a4a4c369804251929466b5b66659622e772a31;hb=d8dd1185b8dc8c841f45fc17491afd9f418eb942;hp=9a8c80c1e7c897bb52d02fa665d296289421eecb;hpb=0cafb7751e571eaab17f462297ce6c820e787408;p=pandora-kernel.git

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9a8c80c1e7c8..66a4a4c36980 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -17,6 +17,10 @@ config ARM
 	  Europe.  There is an ARM Linux project with a web page at
 	  <http://www.arm.linux.org.uk/>.
 
+config GENERIC_TIME
+	bool
+	default n
+
 config MMU
 	bool
 	default y
@@ -51,6 +55,10 @@ config GENERIC_HARDIRQS
 	bool
 	default y
 
+config TRACE_IRQFLAGS_SUPPORT
+	bool
+	default y
+
 config HARDIRQS_SW_RESEND
 	bool
 	default y
@@ -66,6 +74,14 @@ config RWSEM_GENERIC_SPINLOCK
 config RWSEM_XCHGADD_ALGORITHM
 	bool
 
+config ARCH_HAS_ILOG2_U32
+	bool
+	default n
+
+config ARCH_HAS_ILOG2_U64
+	bool
+	default n
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -91,7 +107,7 @@ config ARCH_MTD_XIP
 
 config VECTORS_BASE
 	hex
-	default 0xffff0000 if MMU
+	default 0xffff0000 if MMU || CPU_HIGH_VECTOR
 	default DRAM_BASE if REMAP_VECTORS_TO_RAM
 	default 0x00000000
 	help
@@ -198,16 +214,33 @@ config ARCH_IMX
 	help
 	  Support for Motorola's i.MX family of processors (MX1, MXL).
 
-config ARCH_IOP3XX
-	bool "IOP3xx-based"
+config ARCH_IOP32X
+	bool "IOP32x-based"
 	depends on MMU
+	select PLAT_IOP
 	select PCI
 	help
-	  Support for Intel's IOP3XX (XScale) family of processors.
+	  Support for Intel's 80219 and IOP32X (XScale) family of
+	  processors.
+
+config ARCH_IOP33X
+	bool "IOP33x-based"
+	depends on MMU
+	select PLAT_IOP
+	select PCI
+	help
+	  Support for Intel's IOP33X (XScale) family of processors.
+
+config ARCH_IOP13XX
+	bool "IOP13xx-based"
+	select PCI
+	help
+	  Support for Intel's IOP13XX (XScale) family of processors.
 
 config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
+	select GENERIC_TIME
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
@@ -308,7 +341,11 @@ source "arch/arm/mach-footbridge/Kconfig"
 
 source "arch/arm/mach-integrator/Kconfig"
 
-source "arch/arm/mach-iop3xx/Kconfig"
+source "arch/arm/mach-iop32x/Kconfig"
+
+source "arch/arm/mach-iop33x/Kconfig"
+
+source "arch/arm/mach-iop13xx/Kconfig"
 
 source "arch/arm/mach-ixp4xx/Kconfig"
 
@@ -348,8 +385,19 @@ source "arch/arm/mach-netx/Kconfig"
 config ARCH_ACORN
 	bool
 
+config PLAT_IOP
+	bool
+
 source arch/arm/mm/Kconfig
 
+config IWMMXT
+	bool "Enable iWMMXt support"
+	depends CPU_XSCALE || CPU_XSC3
+	default y if PXA27x
+	help
+	  Enable support for iWMMXt context switching at run time if
+	  running on a CPU that supports it.
+
 #  bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER
 config XSCALE_PMU
 	bool
@@ -559,7 +607,7 @@ config LEDS
 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
 		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-		   ARCH_AT91RM9200 || MACH_TRIZEPS4
+		   ARCH_AT91 || MACH_TRIZEPS4
 	help
 	  If you say Y here, the LEDs on your machine will be used
 	  to provide useful information about your current system status.
@@ -600,9 +648,10 @@ config LEDS_CPU
 
 config ALIGNMENT_TRAP
 	bool
+	depends on CPU_CP15_MMU
 	default y if !ARCH_EBSA110
 	help
-	  ARM processors can not fetch/store information which is not
+	  ARM processors cannot fetch/store information which is not
 	  naturally aligned on the bus, i.e., a 4 byte fetch must start at an
 	  address divisible by 4. On 32-bit ARM processors, these non-aligned
 	  fetch/store instructions will be emulated in software if you say
@@ -631,11 +680,12 @@ config ZBOOT_ROM_BSS
 	hex "Compressed ROM boot loader BSS address"
 	default "0"
 	help
-	  The base address of 64KiB of read/write memory in the target
-	  for the ROM-able zImage, which must be available while the
-	  decompressor is running.  Platforms which normally make use of
-	  ROM-able zImage formats normally set this to a suitable
-	  value in their defconfig file.
+	  The base address of an area of read/write memory in the target
+	  for the ROM-able zImage which must be available while the
+	  decompressor is running. It must be large enough to hold the
+	  entire decompressed kernel plus an additional 128 KiB.
+	  Platforms which normally make use of ROM-able zImage formats
+	  normally set this to a suitable value in their defconfig file.
 
 	  If ZBOOT_ROM is not enabled, this has no effect.
 
@@ -688,7 +738,7 @@ config XIP_PHYS_ADDR
 
 endmenu
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX )
 
 menu "CPU Frequency scaling"
 
@@ -715,6 +765,15 @@ config CPU_FREQ_INTEGRATOR
 
 	  If in doubt, say Y.
 
+config CPU_FREQ_IMX
+	tristate "CPUfreq driver for i.MX CPUs"
+	depends on ARCH_IMX && CPU_FREQ
+	default n
+	help
+	  This enables the CPUfreq driver for i.MX CPUs.
+
+	  If in doubt, say N.
+
 endmenu
 
 endif
@@ -830,7 +889,7 @@ source "drivers/base/Kconfig"
 
 source "drivers/connector/Kconfig"
 
-if ALIGNMENT_TRAP
+if ALIGNMENT_TRAP || !CPU_CP15_MMU
 source "drivers/mtd/Kconfig"
 endif
 
@@ -842,7 +901,7 @@ source "drivers/block/Kconfig"
 
 source "drivers/acorn/block/Kconfig"
 
-if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
+if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \
 	|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
 	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
 	|| ARCH_IXP23XX
@@ -851,6 +910,8 @@ endif
 
 source "drivers/scsi/Kconfig"
 
+source "drivers/ata/Kconfig"
+
 source "drivers/md/Kconfig"
 
 source "drivers/message/fusion/Kconfig"
@@ -891,6 +952,8 @@ source "drivers/video/Kconfig"
 
 source "sound/Kconfig"
 
+source "drivers/hid/Kconfig"
+
 source "drivers/usb/Kconfig"
 
 source "drivers/mmc/Kconfig"