X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=Documentation%2Fscsi%2Fscsi-changer.txt;h=ade046ea7c17a60420148644837486e6e4172e82;hb=92f73a62a100d2068e8f327e573da01529184c18;hp=c132687b017a64ad77f5f8f2709705f32d36af05;hpb=43fde784a698aff26de0fc1dbd84aa075b8cfb5f;p=pandora-kernel.git

diff --git a/Documentation/scsi/scsi-changer.txt b/Documentation/scsi/scsi-changer.txt
index c132687b017a..ade046ea7c17 100644
--- a/Documentation/scsi/scsi-changer.txt
+++ b/Documentation/scsi/scsi-changer.txt
@@ -31,7 +31,7 @@ changers. But it allows to handle nearly all possible cases. It knows
   media transport - this one shuffles around the media, i.e. the
                     transport arm.  Also known as "picker".
   storage         - a slot which can hold a media.
-  import/export   - the same as above, but is accessable from outside,
+  import/export   - the same as above, but is accessible from outside,
                     i.e. there the operator (you !) can use this to
                     fill in and remove media from the changer.
 		    Sometimes named "mailslot".
@@ -88,7 +88,7 @@ If the module finds the changer, it prints some messages about the
 device [ try "dmesg" if you don't see anything ] and should show up in
 /proc/devices. If not....  some changers use ID ? / LUN 0 for the
 device and ID ? / LUN 1 for the robot mechanism. But Linux does *not*
-look for LUN's other than 0 as default, becauce there are to many
+look for LUNs other than 0 as default, because there are too many
 broken devices. So you can try:
 
   1) echo "scsi add-single-device 0 0 ID 1" > /proc/scsi/scsi
@@ -102,12 +102,12 @@ Trouble?
 
 If you insmod the driver with "insmod debug=1", it will be verbose and
 prints a lot of stuff to the syslog.  Compiling the kernel with
-CONFIG_SCSI_CONSTANTS=y improves the quality of the error messages alot
+CONFIG_SCSI_CONSTANTS=y improves the quality of the error messages a lot
 because the kernel will translate the error codes into human-readable
 strings then.
 
 You can display these messages with the dmesg command (or check the
-logfiles).  If you email me some question becauce of a problem with the
+logfiles).  If you email me some question because of a problem with the
 driver, please include these messages.