X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=Documentation%2Fkernel-parameters.txt;h=4720f8ca211a1a61546cd07b7f5b7713dedd1c2b;hb=da6e88f4963385b1b649b043691d206fbb951913;hp=e07c432c731ff9a516fe8b23228af0fe6fa1d29a;hpb=8b91ac09732895f928ed6107bda5318cf260520b;p=pandora-kernel.git

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e07c432c731f..4720f8ca211a 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -271,6 +271,17 @@ and is between 256 and 4096 characters. It is defined in the file
 	aic79xx=	[HW,SCSI]
 			See Documentation/scsi/aic79xx.txt.
 
+	amd_iommu=	[HW,X86-84]
+			Pass parameters to the AMD IOMMU driver in the system.
+			Possible values are:
+			isolate - enable device isolation (each device, as far
+			          as possible, will get its own protection
+			          domain)
+	amd_iommu_size= [HW,X86-64]
+			Define the size of the aperture for the AMD IOMMU
+			driver. Possible values are:
+			'32M', '64M' (default), '128M', '256M', '512M', '1G'
+
 	amijoy.map=	[HW,JOY] Amiga joystick support
 			Map of devices attached to JOY0DAT and JOY1DAT
 			Format: <a>,<b>
@@ -295,7 +306,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			when initialising the APIC and IO-APIC components.
 
 	apm=		[APM] Advanced Power Management
-			See header of arch/i386/kernel/apm.c.
+			See header of arch/x86/kernel/apm_32.c.
 
 	arcrimi=	[HW,NET] ARCnet - "RIM I" (entirely mem-mapped) cards
 			Format: <io>,<irq>,<nodeID>
@@ -560,6 +571,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	debug_objects	[KNL] Enable object debugging
 
+	debugpat	[X86] Enable PAT debugging
+
 	decnet.addr=	[HW,NET]
 			Format: <area>[,<node>]
 			See also Documentation/networking/decnet.txt.
@@ -599,6 +612,29 @@ and is between 256 and 4096 characters. It is defined in the file
 			See drivers/char/README.epca and
 			Documentation/digiepca.txt.
 
+	disable_mtrr_cleanup [X86]
+	enable_mtrr_cleanup [X86]
+			The kernel tries to adjust MTRR layout from continuous
+			to discrete, to make X server driver able to add WB
+			entry later. This parameter enables/disables that.
+
+	mtrr_chunk_size=nn[KMG] [X86]
+			used for mtrr cleanup. It is largest continous chunk
+			that could hold holes aka. UC entries.
+
+	mtrr_gran_size=nn[KMG] [X86]
+			Used for mtrr cleanup. It is granularity of mtrr block.
+			Default is 1.
+			Large value could prevent small alignment from
+			using up MTRRs.
+
+	mtrr_spare_reg_nr=n [X86]
+			Format: <integer>
+			Range: 0,7 : spare reg number
+			Default : 1
+			Used for mtrr cleanup. It is spare mtrr entries number.
+			Set to 2 or more if your graphical card needs more.
+
 	disable_mtrr_trim [X86, Intel and AMD only]
 			By default the kernel will trim any uncacheable
 			memory out of your available memory pool based on
@@ -638,7 +674,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	elanfreq=	[X86-32]
 			See comment before function elanfreq_setup() in
-			arch/i386/kernel/cpu/cpufreq/elanfreq.c.
+			arch/x86/kernel/cpu/cpufreq/elanfreq.c.
 
 	elevator=	[IOSCHED]
 			Format: {"anticipatory" | "cfq" | "deadline" | "noop"}
@@ -1208,6 +1244,11 @@ and is between 256 and 4096 characters. It is defined in the file
 	mtdparts=	[MTD]
 			See drivers/mtd/cmdlinepart.c.
 
+	mtdset=		[ARM]
+			ARM/S3C2412 JIVE boot control
+
+			See arch/arm/mach-s3c2412/mach-jive.c
+
 	mtouchusb.raw_coordinates=
 			[HW] Make the MicroTouch USB driver use raw coordinates
 			('y', default) or cooked coordinates ('n')
@@ -1571,6 +1612,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format: { parport<nr> | timid | 0 }
 			See also Documentation/parport.txt.
 
+	pmtmr=		[X86] Manual setup of pmtmr I/O Port. 
+			Override pmtimer IOPort with a hex value.
+			e.g. pmtmr=0x508
+
 	pnpacpi=	[ACPI]
 			{ off }
 
@@ -1679,6 +1724,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format: <reboot_mode>[,<reboot_mode2>[,...]]
 			See arch/*/kernel/reboot.c or arch/*/kernel/process.c			
 
+	relax_domain_level=
+			[KNL, SMP] Set scheduler's default relax_domain_level.
+			See Documentation/cpusets.txt.
+
 	reserve=	[KNL,BUGS] Force the kernel to ignore some iomem area
 
 	reservetop=	[X86-32]
@@ -2112,6 +2161,9 @@ and is between 256 and 4096 characters. It is defined in the file
 	usbhid.mousepoll=
 			[USBHID] The interval which mice are to be polled at.
 
+	add_efi_memmap	[EFI; x86-32,X86-64] Include EFI memory map in
+			kernel's map of available physical RAM.
+
 	vdso=		[X86-32,SH,x86-64]
 			vdso=2: enable compat VDSO (default with COMPAT_VDSO)
 			vdso=1: enable VDSO (default)