#include <linux/module.h>
-#include <linux/config.h>
#include <linux/types.h>
#include <asm/setup.h>
static void abnormal_finished (struct NCR53c7x0_cmd *cmd, int result);
static int disable (struct Scsi_Host *host);
static int NCR53c7xx_run_tests (struct Scsi_Host *host);
-static irqreturn_t NCR53c7x0_intr(int irq, void *dev_id, struct pt_regs * regs);
+static irqreturn_t NCR53c7x0_intr(int irq, void *dev_id);
static void NCR53c7x0_intfly (struct Scsi_Host *host);
static int ncr_halt (struct Scsi_Host *host);
static void intr_phase_mismatch (struct Scsi_Host *host, struct NCR53c7x0_cmd
NCR53c7x0_driver_init (host);
- if (request_irq(host->irq, NCR53c7x0_intr, SA_SHIRQ, "53c7xx", host))
+ if (request_irq(host->irq, NCR53c7x0_intr, IRQF_SHARED, "53c7xx", host))
{
printk("scsi%d : IRQ%d not free, detaching\n",
host->host_no, host->irq);
real = get_zeroed_page(GFP_ATOMIC);
if (real == 0)
return NULL;
- memset((void *)real, 0, 4096);
cache_push(virt_to_phys((void *)real), 4096);
cache_clear(virt_to_phys((void *)real), 4096);
kernel_set_cachemode((void *)real, 4096, IOMAP_NOCACHE_SER);
for (i = 0; cmd->use_sg ? (i < cmd->use_sg) : !i; cmd_datain += 4,
cmd_dataout += 4, ++i) {
u32 vbuf = cmd->use_sg
- ? (u32)page_address(((struct scatterlist *)cmd->buffer)[i].page)+
- ((struct scatterlist *)cmd->buffer)[i].offset
+ ? (u32)page_address(((struct scatterlist *)cmd->request_buffer)[i].page)+
+ ((struct scatterlist *)cmd->request_buffer)[i].offset
: (u32)(cmd->request_buffer);
u32 bbuf = virt_to_bus((void *)vbuf);
u32 count = cmd->use_sg ?
- ((struct scatterlist *)cmd->buffer)[i].length :
+ ((struct scatterlist *)cmd->request_buffer)[i].length :
cmd->request_bufflen;
/*
}
/*
- * Function : static irqreturn_t NCR53c7x0_intr (int irq, void *dev_id, struct pt_regs * regs)
+ * Function : static irqreturn_t NCR53c7x0_intr (int irq, void *dev_id)
*
* Purpose : handle NCR53c7x0 interrupts for all NCR devices sharing
* the same IRQ line.
*
- * Inputs : Since we're using the SA_INTERRUPT interrupt handler
+ * Inputs : Since we're using the IRQF_DISABLED interrupt handler
* semantics, irq indicates the interrupt which invoked
* this handler.
*
*/
static irqreturn_t
-NCR53c7x0_intr (int irq, void *dev_id, struct pt_regs * regs)
+NCR53c7x0_intr (int irq, void *dev_id)
{
NCR53c7x0_local_declare();
struct Scsi_Host *host; /* Host we are looking at */
* account the current synchronous offset)
*/
- sstat = (NCR53c8x0_read8 (SSTAT2_REG);
+ sstat = NCR53c8x0_read8 (SSTAT2_REG);
offset = OFFSET (sstat & SSTAT2_FF_MASK) >> SSTAT2_FF_SHIFT;
phase = sstat & SSTAT2_PHASE_MASK;
if ((buffers = cmd->use_sg)) {
for (offset = 0,
- segment = (struct scatterlist *) cmd->buffer;
+ segment = (struct scatterlist *) cmd->request_buffer;
buffers && !((found = ((ptr >= (char *)page_address(segment->page)+segment->offset) &&
(ptr < ((char *)page_address(segment->page)+segment->offset+segment->length)))));
--buffers, offset += segment->length, ++segment)
#if 0
printk("scsi%d: comparing 0x%p to 0x%p\n",
- cmd->device->host->host_no, saved, page_address(segment->page+segment->offset);
+ cmd->device->host->host_no, saved, page_address(segment->page+segment->offset));
#else
;
#endif