return -ENOENT;
}
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
-/**
- * via_error_handler - reset for VIA chips
- * @ap: ATA port
- *
- * Handle the reset callback for the later chips with cable detect
- */
-
-static void via_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, via_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
/**
* via_do_set_mode - set initial PIO mode data
* @ap: ATA interface
pci_read_config_byte(pdev, 0x4C, &setup);
setup &= ~(3 << shift);
- setup |= FIT(t.setup, 1, 4) << shift; /* 1,4 or 1,4 - 1 FIXME */
+ setup |= clamp_val(t.setup, 1, 4) << shift; /* 1,4 or 1,4 - 1 FIXME */
pci_write_config_byte(pdev, 0x4C, setup);
}
/* Load the PIO mode bits */
pci_write_config_byte(pdev, 0x4F - ap->port_no,
- ((FIT(t.act8b, 1, 16) - 1) << 4) | (FIT(t.rec8b, 1, 16) - 1));
+ ((clamp_val(t.act8b, 1, 16) - 1) << 4) | (clamp_val(t.rec8b, 1, 16) - 1));
pci_write_config_byte(pdev, 0x48 + offset,
- ((FIT(t.active, 1, 16) - 1) << 4) | (FIT(t.recover, 1, 16) - 1));
+ ((clamp_val(t.active, 1, 16) - 1) << 4) | (clamp_val(t.recover, 1, 16) - 1));
/* Load the UDMA bits according to type */
switch(udma_type) {
/* BUG() ? */
/* fall through */
case 33:
- ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 5) - 2)) : 0x03;
+ ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 5) - 2)) : 0x03;
break;
case 66:
- ut = t.udma ? (0xe8 | (FIT(t.udma, 2, 9) - 2)) : 0x0f;
+ ut = t.udma ? (0xe8 | (clamp_val(t.udma, 2, 9) - 2)) : 0x0f;
break;
case 100:
- ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07;
+ ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07;
break;
case 133:
- ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07;
+ ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07;
break;
}
.cable_detect = via_cable_detect,
.set_piomode = via_set_piomode,
.set_dmamode = via_set_dmamode,
- .error_handler = via_error_handler,
+ .prereset = via_pre_reset,
};
static struct ata_port_operations via_port_ops_noirq = {
.inherits = &via_port_ops,
- .data_xfer = ata_data_xfer_noirq,
+ .sff_data_xfer = ata_sff_data_xfer_noirq,
};
/**
}
pci_dev_put(isa);
- /* 0x40 low bits indicate enabled channels */
- pci_read_config_byte(pdev, 0x40 , &enable);
- enable &= 3;
- if (enable == 0) {
- return -ENODEV;
+ if (!(config->flags & VIA_NO_ENABLES)) {
+ /* 0x40 low bits indicate enabled channels */
+ pci_read_config_byte(pdev, 0x40 , &enable);
+ enable &= 3;
+ if (enable == 0)
+ return -ENODEV;
}
/* Initialise the FIFO for the enabled channels. */
}
/* We have established the device type, now fire it up */
- return ata_pci_init_one(pdev, ppi, &via_sht, (void *)config);
+ return ata_pci_sff_init_one(pdev, ppi, &via_sht, (void *)config);
}
#ifdef CONFIG_PM