3 menu "TI OMAP2/3/4 Specific Features"
5 config ARCH_OMAP2PLUS_TYPICAL
6 bool "Typical OMAP configuration"
12 select NEON if ARCH_OMAP3 || ARCH_OMAP4
14 select SERIAL_OMAP_CONSOLE
17 select MENELAUS if ARCH_OMAP2
18 select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
19 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
21 Compile a kernel suitable for booting most boards
25 depends on ARCH_OMAP2PLUS
28 select MULTI_IRQ_HANDLER
32 depends on ARCH_OMAP2PLUS
35 select USB_ARCH_HAS_EHCI if USB_SUPPORT
38 select ARM_CPU_SUSPEND if PM
39 select MULTI_IRQ_HANDLER
44 depends on ARCH_OMAP2PLUS
49 select LOCAL_TIMERS if SMP
50 select PL310_ERRATA_588369
51 select PL310_ERRATA_727915
52 select ARM_ERRATA_720789
55 select USB_ARCH_HAS_EHCI if USB_SUPPORT
56 select ARM_CPU_SUSPEND if PM
58 comment "OMAP Core Type"
62 bool "OMAP2420 support"
69 bool "OMAP2430 support"
75 bool "OMAP3430 support"
90 config OMAP_PACKAGE_ZAF
93 config OMAP_PACKAGE_ZAC
96 config OMAP_PACKAGE_CBC
99 config OMAP_PACKAGE_CBB
102 config OMAP_PACKAGE_CUS
105 config OMAP_PACKAGE_CBP
108 config OMAP_PACKAGE_CBL
111 config OMAP_PACKAGE_CBS
114 comment "OMAP Board Type"
115 depends on ARCH_OMAP2PLUS
117 config MACH_OMAP_GENERIC
118 bool "Generic OMAP2+ board"
119 depends on ARCH_OMAP2PLUS
122 Support for generic TI OMAP2+ boards using Flattened Device Tree.
123 More information at Documentation/devicetree
125 config MACH_OMAP2_TUSB6010
127 depends on ARCH_OMAP2 && SOC_OMAP2420
128 default y if MACH_NOKIA_N8X0
131 bool "OMAP 2420 H4 board"
132 depends on SOC_OMAP2420
134 select OMAP_PACKAGE_ZAF
135 select OMAP_DEBUG_DEVICES
137 config MACH_OMAP_APOLLON
138 bool "OMAP 2420 Apollon board"
139 depends on SOC_OMAP2420
141 select OMAP_PACKAGE_ZAC
143 config MACH_OMAP_2430SDP
144 bool "OMAP 2430 SDP board"
145 depends on SOC_OMAP2430
147 select OMAP_PACKAGE_ZAC
149 config MACH_OMAP3_BEAGLE
150 bool "OMAP3 BEAGLE board"
151 depends on ARCH_OMAP3
153 select OMAP_PACKAGE_CBB
155 config MACH_DEVKIT8000
156 bool "DEVKIT8000 board"
157 depends on ARCH_OMAP3
159 select OMAP_PACKAGE_CUS
162 bool "OMAP3 LDP board"
163 depends on ARCH_OMAP3
165 select OMAP_PACKAGE_CBB
167 config MACH_OMAP3530_LV_SOM
168 bool "OMAP3 Logic 3530 LV SOM board"
169 depends on ARCH_OMAP3
170 select OMAP_PACKAGE_CBB
173 Support for the LogicPD OMAP3530 SOM Development kit
174 for full description please see the products webpage at
175 http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit
177 config MACH_OMAP3_TORPEDO
178 bool "OMAP3 Logic 35x Torpedo board"
179 depends on ARCH_OMAP3
180 select OMAP_PACKAGE_CBB
183 Support for the LogicPD OMAP35x Torpedo Development kit
184 for full description please see the products webpage at
185 http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit
188 bool "Gumstix Overo board"
189 depends on ARCH_OMAP3
191 select OMAP_PACKAGE_CBB
194 bool "OMAP 3530 EVM board"
195 depends on ARCH_OMAP3
197 select OMAP_PACKAGE_CBB
199 config MACH_OMAP3517EVM
200 bool "OMAP3517/ AM3517 EVM board"
201 depends on ARCH_OMAP3
203 select OMAP_PACKAGE_CBB
205 config MACH_CRANEBOARD
206 bool "AM3517/05 CRANE board"
207 depends on ARCH_OMAP3
208 select OMAP_PACKAGE_CBB
210 config MACH_OMAP3_PANDORA
212 depends on ARCH_OMAP3
214 select OMAP_PACKAGE_CBB
215 select REGULATOR_FIXED_VOLTAGE if REGULATOR
217 config MACH_OMAP3_TOUCHBOOK
218 bool "OMAP3 Touch Book"
219 depends on ARCH_OMAP3
222 config MACH_OMAP_3430SDP
223 bool "OMAP 3430 SDP board"
224 depends on ARCH_OMAP3
226 select OMAP_PACKAGE_CBB
228 config MACH_NOKIA_N800
231 config MACH_NOKIA_N810
234 config MACH_NOKIA_N810_WIMAX
237 config MACH_NOKIA_N8X0
238 bool "Nokia N800/N810"
239 depends on SOC_OMAP2420
241 select OMAP_PACKAGE_ZAC
242 select MACH_NOKIA_N800
243 select MACH_NOKIA_N810
244 select MACH_NOKIA_N810_WIMAX
246 config MACH_NOKIA_RM680
247 bool "Nokia RM-680/696 board"
248 depends on ARCH_OMAP3
250 select OMAP_PACKAGE_CBB
251 select MACH_NOKIA_RM696
253 config MACH_NOKIA_RX51
254 bool "Nokia RX-51 board"
255 depends on ARCH_OMAP3
257 select OMAP_PACKAGE_CBB
259 config MACH_OMAP_ZOOM2
260 bool "OMAP3 Zoom2 board"
261 depends on ARCH_OMAP3
263 select OMAP_PACKAGE_CBB
265 select SERIAL_CORE_CONSOLE
266 select SERIAL_8250_CONSOLE
267 select REGULATOR_FIXED_VOLTAGE if REGULATOR
269 config MACH_OMAP_ZOOM3
270 bool "OMAP3630 Zoom3 board"
271 depends on ARCH_OMAP3
273 select OMAP_PACKAGE_CBP
275 select SERIAL_CORE_CONSOLE
276 select SERIAL_8250_CONSOLE
277 select REGULATOR_FIXED_VOLTAGE if REGULATOR
280 bool "CompuLab CM-T35/CM-T3730 modules"
281 depends on ARCH_OMAP3
284 select OMAP_PACKAGE_CUS
287 bool "CompuLab CM-T3517 module"
288 depends on ARCH_OMAP3
290 select OMAP_PACKAGE_CBB
297 depends on ARCH_OMAP3
299 select OMAP_PACKAGE_CBB
302 bool "IGEP OMAP3 module"
303 depends on ARCH_OMAP3
305 select OMAP_PACKAGE_CBB
309 bool "OMAP3 SBC STALKER board"
310 depends on ARCH_OMAP3
312 select OMAP_PACKAGE_CUS
314 config MACH_OMAP_3630SDP
315 bool "OMAP3630 SDP board"
316 depends on ARCH_OMAP3
318 select OMAP_PACKAGE_CBP
320 config MACH_TI8168EVM
321 bool "TI8168 Evaluation Module"
322 depends on SOC_OMAPTI81XX
325 config MACH_TI8148EVM
326 bool "TI8148 Evaluation Module"
327 depends on SOC_OMAPTI81XX
330 config MACH_OMAP_4430SDP
331 bool "OMAP 4430 SDP board"
333 depends on ARCH_OMAP4
334 select OMAP_PACKAGE_CBL
335 select OMAP_PACKAGE_CBS
336 select REGULATOR_FIXED_VOLTAGE if REGULATOR
338 config MACH_OMAP4_PANDA
339 bool "OMAP4 Panda Board"
341 depends on ARCH_OMAP4
342 select OMAP_PACKAGE_CBL
343 select OMAP_PACKAGE_CBS
344 select REGULATOR_FIXED_VOLTAGE if REGULATOR
347 bool "OMAP3 debugging peripherals"
348 depends on ARCH_OMAP3
352 Say Y here to enable debugging hardware of omap3
354 config OMAP3_SDRC_AC_TIMING
355 bool "Enable SDRC AC timing register changes"
356 depends on ARCH_OMAP3
359 If you know that none of your system initiators will attempt to
360 access SDRAM during CORE DVFS, select Y here. This should boost
361 SDRAM performance at lower CORE OPPs. There are relatively few
362 users who will wish to say yes at this point - almost everyone will
363 wish to say no. Selecting yes without understanding what is
364 going on could result in system crashes;
366 config OMAP4_ERRATA_I688
367 bool "OMAP4 errata: Async Bridge Corruption"
368 depends on ARCH_OMAP4
369 select ARCH_HAS_BARRIERS
371 If a data is stalled inside asynchronous bridge because of back
372 pressure, it may be accepted multiple times, creating pointer
373 misalignment that will corrupt next transfers on that data path
374 until next reset of the system (No recovery procedure once the
375 issue is hit, the path remains consistently broken). Async bridge
376 can be found on path between MPU to EMIF and MPU to L3 interconnect.
377 This situation can happen only when the idle is initiated by a
378 Master Request Disconnection (which is trigged by software when
379 executing WFI on CPU).
380 The work-around for this errata needs all the initiators connected
381 through async bridge must ensure that data path is properly drained
382 before issuing WFI. This condition will be met if one Strongly ordered
383 access is performed to the target right before executing the WFI.
384 In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained.
385 IO barrier ensure that there is no synchronisation loss on initiators
386 operating on both interconnect port simultaneously.