From ff3568fcfe22504cbf61711350c49876a7b5dd7c Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Mon, 4 Feb 2019 13:10:48 -0800 Subject: [PATCH] imx: ventana: do not iomux UART1 The only UART that is garunteed on Ventana boards is UART2 (serial-console). Remove UART1 pinmux as that it is not consistent across all Ventana boards and U-Boot doesn't need it. Signed-off-by: Tim Harvey --- board/gateworks/gw_ventana/common.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c index 41fe8dc240..f577bdbdfb 100644 --- a/board/gateworks/gw_ventana/common.c +++ b/board/gateworks/gw_ventana/common.c @@ -18,12 +18,6 @@ #include "common.h" -/* UART1: Function varies per baseboard */ -static iomux_v3_cfg_t const uart1_pads[] = { - IOMUX_PADS(PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), -}; - /* UART2: Serial Console */ static iomux_v3_cfg_t const uart2_pads[] = { IOMUX_PADS(PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), @@ -32,7 +26,6 @@ static iomux_v3_cfg_t const uart2_pads[] = { void setup_iomux_uart(void) { - SETUP_IOMUX_PADS(uart1_pads); SETUP_IOMUX_PADS(uart2_pads); } -- 2.39.2