From 6b0c174d5245986506f5fb7f2ffe6f1e01278367 Mon Sep 17 00:00:00 2001 From: Abel Vesa Date: Fri, 1 Feb 2019 16:40:24 +0000 Subject: [PATCH] board: mx6sabresd: Remove the enet reset gpio handling Rely on the phy-reset-gpios which is set in imx6qdl-sabresd dtsi and get rid of the enet reset gpio handling from the board file. Signed-off-by: Abel Vesa Reviewed-by: Fabio Estevam --- board/freescale/mx6sabresd/mx6sabresd.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index 0824a05745..385a18e923 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -94,13 +94,6 @@ static iomux_v3_cfg_t const enet_pads[] = { static void setup_iomux_enet(void) { SETUP_IOMUX_PADS(enet_pads); - - /* Reset AR8031 PHY */ - gpio_request(IMX_GPIO_NR(1, 25), "ENET PHY Reset"); - gpio_direction_output(IMX_GPIO_NR(1, 25) , 0); - mdelay(10); - gpio_set_value(IMX_GPIO_NR(1, 25), 1); - udelay(100); } static iomux_v3_cfg_t const usdhc2_pads[] = { -- 2.39.2