From ecf55212ba6a7d71db5246977431fc28a7850df3 Mon Sep 17 00:00:00 2001 From: "Du, Wenkai" Date: Thu, 10 Apr 2014 23:03:19 +0000 Subject: [PATCH] i2c: designware: Mask all interrupts during i2c controller enable commit 47bb27e78867997040a228328f2a631c3c7f2c82 upstream. There have been "i2c_designware 80860F41:00: controller timed out" errors on a number of Baytrail platforms. The issue is caused by incorrect value in Interrupt Mask Register (DW_IC_INTR_MASK) when i2c core is being enabled. This causes call to __i2c_dw_enable() to immediately start the transfer which leads to timeout. There are 3 failure modes observed: 1. Failure in S0 to S3 resume path The default value after reset for DW_IC_INTR_MASK is 0x8ff. When we start the first transaction after resuming from system sleep, TX_EMPTY interrupt is already unmasked because of the hardware default. 2. Failure in normal operational path This failure happens rarely and is hard to reproduce. Debug trace showed that DW_IC_INTR_MASK had value of 0x254 when failure occurred, which meant TX_EMPTY was unmasked. 3. Failure in S3 to S0 suspend path This failure also happens rarely and is hard to reproduce. Adding debug trace that read DW_IC_INTR_MASK made this failure not reproducible. But from ISR call trace we could conclude TX_EMPTY was unmasked when problem occurred. The patch masks all interrupts before the controller is enabled to resolve the faulty DW_IC_INTR_MASK conditions. Signed-off-by: Wenkai Du Acked-by: Mika Westerberg [wsa: improved the comment and removed typo in commit msg] Signed-off-by: Wolfram Sang Signed-off-by: Ben Hutchings --- Reading git-format-patch failed