From bb3a2ef2eb8cfaea335dcb3426350df7f3d48069 Mon Sep 17 00:00:00 2001
From: supriya karanth <supriya.karanth@stericsson.com>
Date: Thu, 6 Dec 2012 11:12:48 +0530
Subject: [PATCH] usb: musb: set TXMAXP and AUTOSET for full speed bulk in
 device mode

The TXMAXP register is not set correctly for full speed bulk case
when the can_bulk_split() is used. Without this PIO transfers will
not take place correctly

The "mult" factor needs to be updated correctly for the
can_bulk_split() case

The AUTOSET bit in the TXCSR is not being set if the "mult"
factor is greater than 0 for the High Bandwidth ISO case.
But the "mult" factor is also greater than 0 in case of Full speed
bulk transfers with the packet splitting in TXMAXP register

Without the AUTOSET the DMA transfers will not progress in mode1

[ balbi@ti.com : add braces to both branches ]

Signed-off-by: supriya karanth <supriya.karanth@stericsson.com>
Signed-off-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
Reading git-format-patch failed