From 8acea298bb82c38b20855cd46a46b9e418dc1fb0 Mon Sep 17 00:00:00 2001 From: Dario Binacchi Date: Tue, 20 May 2025 10:54:16 +0200 Subject: [PATCH] spl: Kconfig: support U-Boot load from raw NAND Commit 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options") breaks the boot of the BSH SMM S2 board. As stated in the commit itself, "Some boards use this value even though MMC is not enabled in SPL, for example imx8mn_bsh_smm_s2". Support load of the U-Boot image from raw NAND sector. This is equivalent to load from MMC raw sector. Fixes: 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options") Signed-off-by: Dario Binacchi --- common/spl/Kconfig | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/common/spl/Kconfig b/common/spl/Kconfig index aa3a85eea54..77cf04d38ed 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -974,6 +974,21 @@ config SPL_NAND_SUPPORT This enables the drivers in drivers/mtd/nand/raw as part of an SPL build. +config SPL_NAND_RAW_U_BOOT_USE_SECTOR + bool "NAND raw mode: by sector" + depends on SPL_NAND_SUPPORT + select SPL_LOAD_BLOCK + help + Use sector number for specifying U-Boot location on NAND in + raw mode. + +config SPL_NAND_RAW_U_BOOT_SECTOR + hex "Address on the NAND to load U-Boot from" + depends on SPL_NAND_RAW_U_BOOT_USE_SECTOR + help + Address on the NAND to load U-Boot from, when the NAND is being used + in raw mode. Units: NAND disk sectors (1 sector = 512 bytes). + config SPL_NAND_RAW_ONLY bool "Support to boot only raw u-boot.bin images" depends on SPL_NAND_SUPPORT -- 2.39.5