From 6a71bbe04c9ee9a6e892e584a09615c1dbf35edc Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Mon, 1 Nov 2010 05:32:31 +0000 Subject: [PATCH] bnx2x: Fix port selection in case of E2 On E2 flavor, dual-port mode, the port argument used for some functions is needed as the global port number rather than the port per path. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index b6588c5411ea..fc637ce7f57d 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -5442,7 +5442,7 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy, struct link_vars *vars) { struct bnx2x *bp = params->bp; - u8 port = params->port, initialize = 1; + u8 port, initialize = 1; u16 val; u16 temp; u32 actual_phy_selection; @@ -5451,6 +5451,10 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy, /* This is just for MDIO_CTL_REG_84823_MEDIA register. */ msleep(1); + if (CHIP_IS_E2(bp)) + port = BP_PATH(bp); + else + port = params->port; bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3, MISC_REGISTERS_GPIO_OUTPUT_HIGH, port); @@ -5627,7 +5631,11 @@ static void bnx2x_848x3_link_reset(struct bnx2x_phy *phy, struct link_params *params) { struct bnx2x *bp = params->bp; - u8 port = params->port; + u8 port; + if (CHIP_IS_E2(bp)) + port = BP_PATH(bp); + else + port = params->port; bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3, MISC_REGISTERS_GPIO_OUTPUT_LOW, port); @@ -7023,7 +7031,8 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, return -EINVAL; } /* disable attentions */ - bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, + bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + + port_of_path*4, (NIG_MASK_XGXS0_LINK_STATUS | NIG_MASK_XGXS0_LINK10G | NIG_MASK_SERDES0_LINK_STATUS | -- 2.39.2