From 02d1d6160ffe13f4ebc6f85f72366a5da0b1fb9b Mon Sep 17 00:00:00 2001 From: Bart Hartgers Date: Sun, 17 Jan 2010 00:56:54 +0100 Subject: [PATCH] sata_via: Correctly setup PIO/DMA for pata slave on vt6421. Before only the timings for master were set. Datasheet can be found here: ftp://ftp.vtbridge.org/Docs/Storage/DS_VT6421A_100_CCPL.PDF Surprisingly, a slave drive works without this patch. According to the datasheet, the controller by default derives the DMA mode from the Set Features command issued to a drive. Not sure about the PIO timings, though. The real problem is that the timings for the master effectively are the ones tuned for the slave. If these support different UDMA-settings, there is trouble, especially when the slave supports a higher UDMA than the master. Anyhow, using the same mechanism for both master and slave seems like a good idea. Signed-off-by: Bart Hartgers Acked-by: Tejun Heo Signed-off-by: Jeff Garzik --- Reading git-format-patch failed