summary |
shortlog | log |
commit |
commitdiff |
tree
first ⋅ prev ⋅ next
Steve Sakoman [Sat, 30 Oct 2010 15:09:45 +0000 (08:09 -0700)]
Panda: Sync ES2.1 changes
Steve Sakoman [Wed, 13 Oct 2010 02:05:03 +0000 (19:05 -0700)]
Overo: Add support for Hynix POP (512MB DDR, 512MB NAND)
Steve Sakoman [Thu, 7 Oct 2010 19:48:20 +0000 (12:48 -0700)]
Revert "Panda: Use proper VCORE3 settings for ES2.1"
This reverts commit
b718a9a320138daf9d799f91c2d0d7a440b6c6c4.
Mistakenly applied.
Steve Sakoman [Thu, 7 Oct 2010 16:37:17 +0000 (09:37 -0700)]
Panda: Use proper VCORE3 settings for ES2.1
This patch based on work by Ricardo Salveti de Araujo and Rob Clark
with help of some other TI folks.
Vincent Stehlé [Sat, 25 Sep 2010 19:33:26 +0000 (21:33 +0200)]
omap3evm: compile onenand.o
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Steve Sakoman [Fri, 17 Sep 2010 17:54:43 +0000 (10:54 -0700)]
panda: add 1GB memory support
This patch is based on Rob Clark's patch in his gitorious x-load repository
Steve Sakoman [Fri, 17 Sep 2010 03:44:52 +0000 (20:44 -0700)]
overo: handle board revision detection for fab revisions <= R2410
Revisions < R2410 connect gpio112 to the 4030 irq_1 line. Since gpio112
is now used for board revision, this could lead to an erroneous
board revision results depending on the state of the irq.
This patch forces a 4030 RTC interrupt, which pulls irq_1 low, giving
a low level on gpio112 on these boards. This gives a proper revision
0 result for these boards.
Steve Sakoman [Thu, 16 Sep 2010 20:33:52 +0000 (13:33 -0700)]
panda: bring up to date with L24.9 changes
Steve Sakoman [Thu, 16 Sep 2010 05:19:48 +0000 (22:19 -0700)]
Beagle, Overo: Don't call nand/onenand functions unless the appropriate CFG option is enabled
Steve Sakoman [Thu, 16 Sep 2010 03:47:50 +0000 (20:47 -0700)]
OMAP4: first cut at support for OMAP4 and Panda
Steve Sakoman [Thu, 16 Sep 2010 03:45:44 +0000 (20:45 -0700)]
drivers/Makefile: Don't automatically build onenand driver for all boards
Steve Sakoman [Thu, 16 Sep 2010 03:43:27 +0000 (20:43 -0700)]
lib/board.c: Don't call i2c, nand, or onenand functions unless appropriate CFG options are defined
Vincent Stehlé [Sat, 4 Sep 2010 15:51:20 +0000 (17:51 +0200)]
Fix omap3evm compilation
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Steve Sakoman [Thu, 26 Aug 2010 04:00:25 +0000 (21:00 -0700)]
Overo: add support for OMAP37XX based COMs
Steve Sakoman [Thu, 26 Aug 2010 03:58:39 +0000 (20:58 -0700)]
nand: k9f1g08: fail gracefully if no nand is present
Steve Sakoman [Fri, 20 Aug 2010 16:06:45 +0000 (09:06 -0700)]
Overo: run from SRAM
Laine Walker-Avina [Tue, 13 Apr 2010 20:27:31 +0000 (13:27 -0700)]
FAT: Find the start of the first partition in a non-hardcoded way
Steve Kipisz [Thu, 8 Jul 2010 15:30:58 +0000 (10:30 -0500)]
Support Micron or Numonyx memory
* Updated Numonyx memory size.
Steve Sakoman [Fri, 26 Mar 2010 04:08:24 +0000 (21:08 -0700)]
OMAP3: beagle: revise SDRC config for Micron 2 bank x 256MB DDR
Steve Sakoman [Sun, 21 Mar 2010 17:23:20 +0000 (10:23 -0700)]
OMAP3: beagle: first cut at support for xM
Steve Sakoman [Sun, 21 Mar 2010 16:37:54 +0000 (09:37 -0700)]
OMAP3: mem.h: add ac timing info for Micron @ 200 Mhz
Steve Sakoman [Thu, 18 Mar 2010 04:25:40 +0000 (21:25 -0700)]
OMAP3: lib/board.c: bump revision, tweak serial boot logic
Steve Sakoman [Thu, 18 Mar 2010 04:22:36 +0000 (21:22 -0700)]
OMAP3: cpu.h: add SDRC register definitions for second RAM bank
Steve Sakoman [Thu, 18 Mar 2010 04:20:02 +0000 (21:20 -0700)]
OMAP3: add GPMC_NONE definition for systems with no nand
Steve Sakoman [Thu, 18 Mar 2010 04:05:17 +0000 (21:05 -0700)]
omap3: add gpio API's
Steve Sakoman [Fri, 5 Mar 2010 04:34:31 +0000 (20:34 -0800)]
drivers/k9f1g08r0a.c: additional nand vendor/device id's
Steve Sakoman [Mon, 8 Feb 2010 22:15:44 +0000 (14:15 -0800)]
board.c: attempt serial boot if not possible to boot from mmc, nand, or onenand
Steve Sakoman [Fri, 6 Mar 2009 16:01:31 +0000 (08:01 -0800)]
cpu/omap3/config.mk: Set march to armv7-a
Dirk Behme [Sat, 20 Dec 2008 19:35:12 +0000 (11:35 -0800)]
OMAP3: X-Loader: Make MMC register macros volatile
As discussed in
http://groups.google.com/group/beagleboard/browse_thread/thread/
14988091de9c80cf
make register macros volatile to avoid reordering by compiler.
Remove macro defined twice.
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Steve Sakoman [Tue, 9 Sep 2008 04:42:28 +0000 (21:42 -0700)]
lib/board.c: Specify where u-boot is being loaded from
Steve Sakoman [Sat, 6 Sep 2008 14:17:22 +0000 (07:17 -0700)]
overo: changes required to make x-load USB downloadable
Note: use *unsigned* version for USB or serial download!
Steve Sakoman [Mon, 18 Aug 2008 18:11:57 +0000 (11:11 -0700)]
omap3evm: provide missing udelay function
Steve Sakoman [Sun, 17 Aug 2008 23:36:10 +0000 (16:36 -0700)]
omap3evm: fix broken build due to missing raise and abort functions
Steve Sakoman [Sat, 16 Aug 2008 13:22:57 +0000 (06:22 -0700)]
omap3evm: modify config to unbreak mmcboot
Steve Sakoman [Fri, 15 Aug 2008 04:23:11 +0000 (21:23 -0700)]
overo: use the same platform.S as beagle
Steve Sakoman [Fri, 15 Aug 2008 04:21:03 +0000 (21:21 -0700)]
Fix build breakage when CONFIG_MMC is disabled
Steve Sakoman [Fri, 8 Aug 2008 00:38:42 +0000 (17:38 -0700)]
lib/board.c: add missing call to misc_init_r
Steve Sakoman [Thu, 7 Aug 2008 22:13:58 +0000 (15:13 -0700)]
overo: add delay to allow vaux2 power supply time to settle
Steve Sakoman [Thu, 7 Aug 2008 21:00:58 +0000 (14:00 -0700)]
Enable i2c support, update mmc driver for beagle and overo, bump version
to 1.42 and add time stamp to boot banner
TODO: omap3evm
Steve Sakoman [Sat, 2 Aug 2008 03:32:13 +0000 (20:32 -0700)]
board.c: implement generalized mmc boot for all boards, clean up boot messages
TODO: remove individual mmc_boot routines from board files
Steve Sakoman [Fri, 1 Aug 2008 19:55:44 +0000 (12:55 -0700)]
mmc: fix infinite loop in mmc_init_stream
Steve Sakoman [Fri, 1 Aug 2008 15:03:41 +0000 (08:03 -0700)]
board.c: check for u-boot on mmc on all configurations, not just those with managed nand
Steve Sakoman [Thu, 31 Jul 2008 23:34:54 +0000 (16:34 -0700)]
board.c: print boot method (mmc, onenand, nand)
Steve Sakoman [Thu, 31 Jul 2008 20:37:13 +0000 (13:37 -0700)]
beagle: fix missing parentheses in while statement (cleanup error)
Steve Sakoman [Thu, 31 Jul 2008 06:53:44 +0000 (23:53 -0700)]
TI tarball had execute permissions set on a number of source files -- change these files to 0644
Steve Sakoman [Thu, 31 Jul 2008 06:22:24 +0000 (23:22 -0700)]
Add support for beagle and overo
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Steve Sakoman [Wed, 30 Jul 2008 16:43:53 +0000 (09:43 -0700)]
clocks343x.h: fix type that resulted in duplicate definitiion of M_12_ES1 with PRCM_CLK_CFG2_332MHZ
Steve Sakoman [Sun, 20 Jul 2008 06:07:37 +0000 (23:07 -0700)]
Initial checkin