Tony Lindgren [Wed, 23 Oct 2013 10:47:01 +0000 (03:47 -0700)]
Merge branch 'omap-for-v3.13/tmp-merge-take2'
Tony Lindgren [Wed, 23 Oct 2013 10:22:50 +0000 (03:22 -0700)]
Merge tag 'omap-for-v3.13/dt-late' into omap-for-v3.13/tmp-merge-take2
Some more dts changes via Benoit Cousson <bcousson@baylibre.com>:
Add a lot of N900 nodes
Add OPP table to OMAP5/DRA7
Add support for Newflow NanoBone board
Add i2c aliases
Add McASP and audio support
Add reset/idle on init bindings for OMAP
Add more nodes for AM4272
Tony Lindgren [Wed, 23 Oct 2013 10:12:45 +0000 (03:12 -0700)]
Merge tag 'for_3.13_super_late/dts_signed' of git://git./linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.13/dt
Add a lot of N900 nodes
Add OPP table to OMAP5/DRA7
Add support for Newflow NanoBone board
Peter Ujfalusi [Wed, 23 Oct 2013 09:32:20 +0000 (12:32 +0300)]
ARM: dts: omap5-uevm: Remove pinmux for dmic pins
When the omap5-evm.dts file has been renamed to omap5-uevm.dts and the sEVM
support got deprecated in favor of uEVM (or Panda5) the content was not
validated.
Panda5 does not have support for digital microphones so remove the pinmux
section for it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Peter Ujfalusi [Wed, 23 Oct 2013 09:32:19 +0000 (12:32 +0300)]
ARM: dts: omap5-uevm: Correct twl6040 reset GPIO pinmux
When the omap5-evm.dts file has been renamed to omap5-uevm.dts and the sEVM
support got deprecated in favor of uEVM (or Panda5) the content was not
validated.
On uEVM the twl6040 reset GPIO is from gpio5_141 and not via gpio5_145, which
was the case in sEVM.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Tony Lindgren [Wed, 23 Oct 2013 09:22:15 +0000 (02:22 -0700)]
Merge tag 'omap-for-v3.13/cpufreq-late' into omap-for-v3.13/tmp-merge-take2
Few patches to make cpufreq work for omap3 with device tree.
Note that this branch has a dependency to the patches merged
with omap-for-v3.13/board-removal-signed-take2.
Tony Lindgren [Wed, 23 Oct 2013 09:21:56 +0000 (02:21 -0700)]
Merge tag 'omap-for-v3.13/fixes-not-urgent-part2' into omap-for-v3.13/tmp-merge-take2
Few more omap fixes that are not regressions or oopses and can
wait for the merge window.
Sebastian Reichel [Tue, 22 Oct 2013 22:49:43 +0000 (00:49 +0200)]
ARM: dts: TWL4030: Add power button support
Enable support for the power button.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Sebastian Reichel [Tue, 22 Oct 2013 22:49:42 +0000 (00:49 +0200)]
ARM: dts: omap3-n900: Add LP5523 support
Add support for LP5523 device.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Sebastian Reichel [Tue, 22 Oct 2013 22:49:41 +0000 (00:49 +0200)]
ARM: dts: omap3-n900: Add TLV320AIC3X support
This patch adds support for Nokia N900 TLV320AIC3X chips.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Sebastian Reichel [Tue, 22 Oct 2013 22:49:40 +0000 (00:49 +0200)]
ARM: dts: omap3-n900:: Mux RX51_LCD_RESET_GPIO in DTS
Add RX51_LCD_RESET_GPIO pin mux information to
display.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Sebastian Reichel [Tue, 22 Oct 2013 22:49:39 +0000 (00:49 +0200)]
ARM: dts: omap3-n900: Add NAND support
This patch adds supports for Nokia N900 NAND memory.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Sebastian Reichel [Tue, 22 Oct 2013 22:49:38 +0000 (00:49 +0200)]
ARM: dts: omap3-n900: Specify regulator info
Add regulator names and voltage information to
the Nokia N900 DTS file.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Sebastian Reichel [Tue, 22 Oct 2013 22:49:37 +0000 (00:49 +0200)]
ARM: dts: TWL4030: Add missing regulators
The twl4030.dtsi is missing some regulators. This patch adds
the missing ones and orders the regulators alphabetically.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Sebastian Reichel [Tue, 22 Oct 2013 22:49:36 +0000 (00:49 +0200)]
ARM: dts: omap3-n900: Add LP5523 support
Add support for LP5523 device.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Sebastian Reichel [Tue, 22 Oct 2013 22:49:35 +0000 (00:49 +0200)]
ARM: dts: omap3-n900: Add vibrator device
Add support for Nokia N900's vibrator.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Sebastian Reichel [Tue, 22 Oct 2013 22:49:34 +0000 (00:49 +0200)]
ARM: dts: omap3-n900: GPIO key definitions
Add device tree node for the GPIO keys provided by the
N900 board. This is a simple conversion of the existing
board code.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Sebastian Reichel [Tue, 22 Oct 2013 22:49:33 +0000 (00:49 +0200)]
ARM: dts: omap3-n900: Add support for SD cards
Add support for external SD card slot.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Sebastian Reichel [Tue, 22 Oct 2013 22:49:32 +0000 (00:49 +0200)]
ARM: dts: omap3-n900: Add UART support
Add UART support to Nokia N900.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Sebastian Reichel [Tue, 22 Oct 2013 22:49:31 +0000 (00:49 +0200)]
ARM: dts: omap3-n900: Fix i2c bus speed
Fix the bus speed of i2c bus 2 and 3.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Sebastian Reichel [Tue, 22 Oct 2013 22:49:30 +0000 (00:49 +0200)]
ARM: dts: omap3-n900: Add pinctrl for i2c devices
Add pin muxing support for the Nokia N900 i2c controllers.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
J Keerthy [Wed, 16 Oct 2013 15:39:07 +0000 (10:39 -0500)]
ARM: dts: DRA7: Add CPU OPP table
Add DT OPP table for DRA7xx family of devices. This data is decoded by
OF with of_init_opp_table() helper function.
The data is based on DRA75x, DRA74x Data Manual revision F (Sept 2013).
TODO: add OPP_HIGH after AVS-Class0 is functional
NOTE: The voltage and frequency values work well only on NOM samples
and it is mandatory to use ABB/AVS Class 0 support for all OPPs.
Clock nodes are pending clock node alignment.
[nm@ti.com: cleanups and rebase to latest]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
J Keerthy [Wed, 16 Oct 2013 15:39:06 +0000 (10:39 -0500)]
ARM: dts: OMAP5: Add CPU OPP table
Add DT OPP table for OMAP54xx family of devices. This data is
decoded by OF with of_init_opp_table() helper function.
The data is based on OMAP543x ES2.0 DM Operating Condition Addendum
Version 0.6(April 2013)
NOTE: The voltage and frequency values work well only on NOM samples
and are supposed to work properly only with ABB/AVS for ALL OPPs.
TODO: Add SPEED BIN OPP after ABB and AVS support so the cpufreq works
on all samples seamlessly. Clock node is pending alignment for clock
dts conversion
[nm@ti.com: sync to latest and fixes]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
J Keerthy [Wed, 16 Oct 2013 15:39:05 +0000 (10:39 -0500)]
ARM: dts: dra7-evm: add smps123 supply for CPU
regulator smps123 supply from Palmas PMIC powers CPU0 on DRA7 EVM.
[nm@ti.com: rebase to latest]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Nishanth Menon [Wed, 16 Oct 2013 15:39:04 +0000 (10:39 -0500)]
ARM: dts: omap5-uevm: add smps123 supply for CPU
regulator smps123 supply from Palmas PMIC powers CPU0 on OMAP5uEVM.
Based on a patch by J Keerthy <j-keerthy@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Nishanth Menon [Wed, 16 Oct 2013 15:39:03 +0000 (10:39 -0500)]
ARM: OMAP3+: use cpu0-cpufreq driver in device tree supported boot
With OMAP3+ and AM33xx supported SoC having defined CPU device tree
entries with operating-points and clock nodes defined, we can now use
the SoC generic cpufreq-cpu0 driver by registering appropriate device.
Cc: Benoit Cousson <bcousson@baylibre.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Nishanth Menon [Wed, 16 Oct 2013 15:39:02 +0000 (10:39 -0500)]
ARM: OMAP2+: add missing lateinit hook for calling pm late init
AM335x, AM43xx, OMAP5 and DRA7 have missing late init hook. Introduce
SoC specific hook with a call to OMAP2+ generic lateinit hook. This
allows the generic late initializations such as cpufreq hooks to be
active.
Based on out-of-tree patches that need to be introduced in
mainline, this introduction allows us to provide the foundation for
further SoC specific features as they are developed.
Cc: Benoit Cousson <bcousson@baylibre.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Nishanth Menon [Wed, 16 Oct 2013 15:39:01 +0000 (10:39 -0500)]
ARM: OMAP3+: do not register non-dt OPP tables for device tree boot
OMAP3+ supports both device tree and non-device tree boot.
Device tree bindings for OMAP3+ is supposed to be added via dts following:
Documentation/devicetree/bindings/power/opp.txt
Since we now have device tree entries for OMAP3+ cpu OPPs,
The current code wrongly adds duplicate OPPs. So, dont register OPPs
when booting using device tree.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Eric Witcher [Fri, 18 Oct 2013 06:42:34 +0000 (02:42 -0400)]
ARM: dts: omap5-uevm: fix mcspi node pin descriptions
Correct mcspi pin descriptions to match corresponding node name and
add chip select number to be consistent with OMAP5 TRM.
Signed-off-by: Eric Witcher <ewitcher@mindspring.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Markus Pargmann [Mon, 14 Oct 2013 12:49:21 +0000 (14:49 +0200)]
ARM: dts: am33xx, change usb ctrl module label
Control module is not usb specific.
Changes the label to usb_ctrl_mod.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Markus Pargmann [Thu, 17 Oct 2013 07:18:38 +0000 (09:18 +0200)]
ARM: OMAP2+: irq, AM33XX add missing register check
am33xx has a INTC_PENDING_IRQ3 register that is not checked for pending
interrupts. This patch adds AM33XX to the ifdef of SOCs that have to
check this register.
Cc: stable@vger.kernel.org
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Afzal Mohammed [Wed, 9 Oct 2013 07:12:33 +0000 (12:42 +0530)]
ARM: OMAP2+: wakeupgen: AM43x adaptation
AM43x has 224 interrupts and 7 banks, make it as maximum values. Keep
default values as earlier, if am43x is detected, update interrupts and
banks accordingly.
Also AM43x has only one cpu, ensure that clearing bitmask at wakeupgen
is done only for the single existing cpu, existing code assumes that
there are two cpu's.
If bitmask is cleared in wakeupgen for the nonexistent second cpu,
an imprecise abort happens as soon as Kernel switches to user space.
It was rootcaused by Sekhar Nori <nsekhar@ti.com>.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Mark Jackson [Fri, 4 Oct 2013 08:15:01 +0000 (09:15 +0100)]
ARM: dts: Add support for Newflow NanoBone board
NanoBone Specification:
-----------------------
CPU:
TI AM335x
Memory:
256MB DDR3
128MB NOR flash
128KB FRAM
Ethernet:
2 x 10/100 connected to SMSC LAN8710 PHY
USB:
1 x USB2.0 Type A
I2C:
2Kbit EEPROM (Microchip 24AA02)
RTC (Maxim DS1338)
GPIO Expander (Microchip MCP23017)
Expansion connector:
6 x UART
1 x MMC/SD
1 x USB2.0
Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Tony Lindgren [Thu, 17 Oct 2013 22:15:22 +0000 (15:15 -0700)]
ARM: dts: Add missing reg, interrupt and dma entries for omap3
Looks like omap3 is still relying on hwmod data for some basic
device tree information. Let's add the information to omap3.dtsi
so we can remove the related hwmod data once omap3 is DT only.
Acked-by: Benoit Cousson <bcousson@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Tue, 22 Oct 2013 12:29:12 +0000 (05:29 -0700)]
Merge tag 'for_3.13_late/dts_signed' of git://git./linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.13/dt
Add i2c aliases
Add McASP and audio support
Add reset/idle on init bindings for OMAP
Add more nodes for AM4272
Nishanth Menon [Wed, 16 Oct 2013 20:21:04 +0000 (15:21 -0500)]
ARM: dts: AM33xx+: Add i2c aliases
Provide alias to allow ordering the i2c devices correctly.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Nishanth Menon [Wed, 16 Oct 2013 20:21:03 +0000 (15:21 -0500)]
ARM: dts: OMAP3+: Add i2c aliases
Currently, on OMAP5, i2c1 and i2c5 defer probe due to pinctrl
dependencies. This changes the i2c ID each bus is registered with in
i2c-dev interface. As a result of this, many userspace tools break and
there is no consistent manner to fix the same if the i2c dev interface
have no consistent numbering.
Since this could happen for other OMAP derivatives, provide i2c alias
for all OMAP3+ SoCs to allow ordering the i2c devices correctly.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Enric Balletbo i Serra [Sat, 19 Oct 2013 20:55:19 +0000 (22:55 +0200)]
ARM: dts: igep0033: Add mmc1 node for SDCARD support.
Add mmc1 dt node to IGEP COM AQUILA board.
Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Peter Ujfalusi [Mon, 21 Oct 2013 09:45:58 +0000 (12:45 +0300)]
ARM: dts: AM4372: Add McASP nodes
Add nodes for McASP0 and McASP1 for AM43xx.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Roger Quadros [Mon, 7 Oct 2013 10:46:50 +0000 (13:46 +0300)]
ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework
The generic PHY framewrok expects different properties than the
old USB PHY framework. Supply those properties.
Fixes USB OTG port on beagle after the Generic PHY framework was
merged in greg/usb-next. [1]
[1] - https://lkml.org/lkml/2013/9/27/581
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Peter Ujfalusi [Sun, 20 Oct 2013 17:04:11 +0000 (20:04 +0300)]
ARM: dts: am335x-evmsk: Audio support
AM335x EVM-SK have only support for audio playback (stereo jack on the
board) via tlv320aic3106 codec connected to McASP1.
Enable the support for audio playback on the board:
- McASP1 configuration
- tlv320aic3106 configuration
- Machine driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Darren Etheridge [Sun, 20 Oct 2013 17:04:10 +0000 (20:04 +0300)]
ARM: dts: am335x-evm: Add audio support for am335x-evm.dts
Adds sound, tlv320aic3106, mcasp1, and am335x_evm_audio_pin nodes.
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Jyri Sarha [Sun, 20 Oct 2013 17:04:09 +0000 (20:04 +0300)]
ARM: dts: AM33XX: mcasp: Add location for data port registers to reg-property
This patch adds a second tuple to reg property. The new property tuple
describes the memory location for data port registers mapped trough
L3 bus on am33xx. The both property tuples are named accordingly in
the reg-names property.
Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Pantelis Antoniou [Sun, 20 Oct 2013 17:04:08 +0000 (20:04 +0300)]
ARM: dts: AM33XX: Add mcasp0 and mcasp1 device tree entries
Add missing mcasp entries in the am33xx.dtsi include file.
Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Mugunthan V N [Thu, 10 Oct 2013 19:14:54 +0000 (00:44 +0530)]
ARM: dts: AM4372: Update Support for EPOS EVM
-> Adding pinmux for cpsw, i2c0.
-> Enabling the modules that are present in AM4372 EPOS EVM
These modules are tested on AM4372 EPOS EVM.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Lokesh Vutla [Thu, 10 Oct 2013 19:14:53 +0000 (00:44 +0530)]
ARM: dts: AM4372: Add L2, EDMA, mailbox, MMC and SHAM nodes
Populate nodes for l2-cache-controller, EDMA, mailbox,
mmc, sham.
Update as well DT properties for epwmss, aes, des.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
George Cherian [Thu, 10 Oct 2013 10:49:54 +0000 (16:19 +0530)]
ARM: dts: OMAP5: Add dr_mode for dwc3
Added dr_mode property in dwc3 and set its default mode to device.
Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Kishon Vijay Abraham I [Thu, 10 Oct 2013 10:49:53 +0000 (16:19 +0530)]
ARM: dts: omap5-uevm: remove always_on, boot_on from smps10_out1
smps10 should be enabled only in the case of host mode. So stop
doing always_on, boot_on from smps10_out1. The driver will enable
it in host mode.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Nishanth Menon [Thu, 10 Oct 2013 16:44:41 +0000 (11:44 -0500)]
ARM: dts: omap4-panda-es: Do not reset gpio1
Do not reset GPIO1 at boot-up because GPIO 7 in GPIO1 block is used on
OMAP4460 PandaBoard-ES to select voltage register in TPS62361 which
supplies VDD_MPU.
Without this, OMAP4460 PandaBoard-ES boards fail to boot-up because
MPU voltage switches over to VSET0 voltage value (boot voltage) which
is not sufficient to operate the device at OPP100.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Rajendra Nayak [Wed, 9 Oct 2013 10:12:01 +0000 (15:42 +0530)]
ARM: dts: am335x-evmsk: Do not reset gpio0
Do not reset GPIO0 at boot-up because GPIO0 is used
on AM335x EVM-SK to control VTT regulators on DDR3.
Without this EVM-SK boards fail to boot-up because
of DDR3 corruption.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Rajendra Nayak [Tue, 15 Oct 2013 07:07:50 +0000 (12:37 +0530)]
ARM: dts: omap: Add reset/idle on init bindings for OMAP
On OMAP we have co-processor IPs, memory controllers,
GPIOs which control regulators and power switches to
PMIC, and SoC internal Bus IPs, some or most of which
should either not be reset or idled or both at init.
(In some cases there are erratas which prevent an IP
from being reset)
Have a way to pass this information from DT.
Update the am33xx/omap4 and omap5 dtsi files with the
new bindings for modules which either should not be
idled. reset or both. A later patch would cleanup the
same information that exists today as part of the hwmod
data files.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Roger Quadros [Mon, 7 Oct 2013 13:28:13 +0000 (16:28 +0300)]
ARM: dts: omap3: Adapt USB OTG to generic PHY framework
The generic PHY framewrok expects different properties than the
old USB PHY framework. Supply those properties.
Fixes USB OTG port on GAT04 and N900 after the Generic PHY framework was
merged in greg/usb-next. [1]
[1] - https://lkml.org/lkml/2013/9/27/581
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Sricharan R [Thu, 10 Oct 2013 07:50:13 +0000 (13:20 +0530)]
ARM: dts: OMAP5: Remove clock-frequency field for cpu timers
The arm arch timers frequency are now programmed in the CNTFREQ
per-cpu register by the timer code using the secure API [1].
So remove the redundant entry from the dts.
[1] http://marc.info/?l=linux-omap&m=
138139106312786&w=2
Signed-off-by: Sricharan R <r.sricharan@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Tony Lindgren [Sun, 20 Oct 2013 16:36:43 +0000 (09:36 -0700)]
Merge tag 'omap-for-v3.13/cm-scm-cleanup-signed'
Via Paul Walmsley <paul@pwsan.com>:
Move some of the OMAP2+ CM and System Control Module direct
register accesses into CM- and System Control
Module-specific "drivers" underneath arch/arm/mach-omap2/. This
is a prerequisite for moving this code out of arch/arm/mach-omap2/ into
drivers/.
Basic test logs are available here:
http://www.pwsan.com/omap/testlogs/cm_scm_cleanup_a_v3.13/
20131019101809/
Tony Lindgren [Sun, 20 Oct 2013 16:36:31 +0000 (09:36 -0700)]
Merge tag 'omap-for-v3.13/cm-scm-cleanup-signed' into omap-for-v3.13/tmp-merge-take2
Via Paul Walmsley <paul@pwsan.com>:
Move some of the OMAP2+ CM and System Control Module direct
register accesses into CM- and System Control
Module-specific "drivers" underneath arch/arm/mach-omap2/. This
is a prerequisite for moving this code out of arch/arm/mach-omap2/ into
drivers/.
Basic test logs are available here:
http://www.pwsan.com/omap/testlogs/cm_scm_cleanup_a_v3.13/
20131019101809/
Tony Lindgren [Sun, 20 Oct 2013 15:55:19 +0000 (08:55 -0700)]
Merge tag 'for-v3.13/cm-scm-cleanup-a' of git://git./linux/kernel/git/pjw/omap-pending into omap-for-v3.13/cm-scm-cleanup
Move some of the OMAP2+ CM and System Control Module direct
register accesses into CM- and System Control
Module-specific "drivers" underneath arch/arm/mach-omap2/. This
is a prerequisite for moving this code out of arch/arm/mach-omap2/ into
drivers/.
Basic test logs are available here:
http://www.pwsan.com/omap/testlogs/cm_scm_cleanup_a_v3.13/
20131019101809/
Tero Kristo [Fri, 11 Oct 2013 16:15:38 +0000 (19:15 +0300)]
ARM: OMAP3: control: add API for setting IVA bootmode
OMAP3 PM core requires IVA2 bootmode to be set to idle during init. Currently,
a direct register write is used for this. Add a new ctrl API for this purpose
instead.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tero Kristo [Fri, 11 Oct 2013 16:15:34 +0000 (19:15 +0300)]
ARM: OMAP3: CM/control: move CM scratchpad save to CM driver
OMAP3 PM code for off-mode currently saves the scratchpad contents for CM
registers within OMAP control module driver. However, as we are separating
CM code into its own driver, this must be moved also. This patch adds a
new API for saving the CM scratchpad contents and uses this from the high
level scratchpad save function.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tero Kristo [Fri, 11 Oct 2013 16:15:33 +0000 (19:15 +0300)]
ARM: OMAP3: McBSP: do not access CM register directly
McBSP driver require special hacks to enable/disable the autoidle feature
for its interface clock for the proper function of the sidetone hardware.
Currently the driver just writes CM registers directly, which should be
avoided. Thus, changed the driver to use the new deny/allow_autoidle
clock API calls.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tero Kristo [Fri, 11 Oct 2013 16:15:32 +0000 (19:15 +0300)]
ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock
Some drivers require direct access to the autoidle functionality of the
interface clocks. Added clock APIs for these, so that the drivers do not
need to access CM registers directly.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tero Kristo [Fri, 11 Oct 2013 16:15:31 +0000 (19:15 +0300)]
ARM: OMAP2: CM/PM: remove direct register accesses outside CM code
Users of the CM funtionality should not access the CM registers directly
by themselves. Thus, added new CM driver APIs for the OMAP2 specific
functionalities which support the existing direct register accesses, and
changed the platform code to use these. This is done in preparation
for moving the CM code into its own individual driver.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tony Lindgren [Fri, 18 Oct 2013 18:22:55 +0000 (11:22 -0700)]
Linux-omap rebuilt: Remerged pending branches after fixing board-removal branch
$ git checkout -b tmp-rebuild-
1382120570 linus
$ git merge -m "Merge omap-for-v3.13/tmp-merge-take2" omap-for-v3.13/tmp-merge-take2
$ git merge -s ours master
$ git checkout master
$ git merge tmp-rebuild-
1382120570
To view the changes since the last rebuild, please do
$ git diff
3808c0230949bee6e51ed7d9f017e2917b9dfc6e..
e0a5b2957103b7a0c40da835f4aded2bb9add7d0 arch/arm/*omap*/
Tony Lindgren [Fri, 18 Oct 2013 18:07:02 +0000 (11:07 -0700)]
Merge tag 'omap-for-v3.13/board-removal-signed-take2' into omap-for-v3.13/tmp-merge-take2
Changes needed to drop legacy booting support for some
omap3 boards.
Note that that these are based on a merge of the
following for the dependencies:
- v3.12-rc5 for fixes to pinctrl mask
- omap-for-v3.13/dt-signed to avoid pointless merge conflicts
- omap-for-v3.13/quirk-signed for legacy pdata handling
Tony Lindgren [Fri, 18 Oct 2013 18:06:55 +0000 (11:06 -0700)]
Merge tag 'omap-for-v3.13/am43xx-hwmod-signed' into omap-for-v3.13/tmp-merge-take2
Changes needed for am43xx for the hwmod data.
This will be the last new set of hwmod data for any SoC
as future SoCs will use a driver and device tree based
approach. But before that can be dealt with, we need to
first sort out the pending driver/clk issues.
Queued by Paul Walmsley <paul@pwsan.com>:
Add hwmod and PRCM data for the TI AM43xx family of SoCs.
Under normal circumstances, these patches would not be merged.
The hwmod and PRCM data should be moved out either to DT data or
to drivers/. Also, the current implementation trades off lines
of diff by dynamically rewriting static data at runtime, which is
a bad practice - it causes future maintenance headaches.
However, after speaking with my upstream, it sounds like it's
better to merge these patches in their current state, due to long
term considerations.
Basic test logs are here:
http://www.pwsan.com/omap/testlogs/am43xx_support_v3.13/
20131015213706/
Due to the lack of an AM43xx board and any available public
documentation, it's impossible for me to review or test that
platform in any meaningful way. But at least the tests above
verify that the patches don't affect existing platforms -
particularly AM33xx.
Javier Martinez Canillas [Fri, 18 Oct 2013 15:37:53 +0000 (17:37 +0200)]
ARM: OMAP2+: remove legacy support for IGEP boards
Device Tree support for IGEP boards in mainline is almost
finished. The only remaining bits are support for the
Marvell SD8686 wifi + BT and TFP410 DVI chips.
Adding support for these should be straightforward so let's
not block OMAP3 moving to Device Tree only boot and remove
the board file for IGEP boards.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 14 Oct 2013 18:31:44 +0000 (11:31 -0700)]
ARM: OMAP2+: Remove legacy support for zoom platforms
We now have pretty decent device tree based support for
zoom platforms. It's not complete, but basics work for
me so adding more features should be quite trivial.
Looks like also 3630 sdp is zoom based, and looking
at it's board file should also be trivial to support
with the device tree based booting.
Patches are welcome if people are still using these.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 14 Oct 2013 18:31:43 +0000 (11:31 -0700)]
ARM: OMAP2+: Remove legacy booting support for omap3 EVM
We now have pretty decent support with the device tree
based booting. Patches to add more features are welcome.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Aaro Koskinen [Mon, 14 Oct 2013 18:30:45 +0000 (11:30 -0700)]
ARM: OMAP2: delete board-rm680
Delete board file for Nokia RM-680/RM-696 (N950/N9). DT-based booting
should be used for further development on this HW.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Aaro Koskinen [Tue, 15 Oct 2013 20:36:09 +0000 (23:36 +0300)]
ARM: dts: add minimal DT support for Nokia N950 & N9 phones
Add minimal DT support for Nokia N950 & N9 phones. The same functionality
that is provided by the current board file should work: serial console,
USB, OneNAND and MMC.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 14 Oct 2013 18:31:43 +0000 (11:31 -0700)]
ARM: dts: Add basic support for zoom3
I've tested serial, MMC, smsc911x and wl12xx on zoom3. As my
omap is an early ES revision, I have not been able to test
off-idle on this one. But anyways, I'd say we have enough
device tree support for the zoom to be able to drop the
board-zoom files. Patches are welcome to add further features
to this .dts file.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Thu, 17 Oct 2013 18:07:42 +0000 (11:07 -0700)]
Merge branch 'omap-for-v3.13/tmp-merge'
Tony Lindgren [Thu, 17 Oct 2013 18:07:25 +0000 (11:07 -0700)]
Merge tag 'omap-for-v3.13/am43xx-hwmod-signed' into omap-for-v3.13/tmp-merge
Changes needed for am43xx for the hwmod data.
This will be the last new set of hwmod data for any SoC
as future SoCs will use a driver and device tree based
approach. But before that can be dealt with, we need to
first sort out the pending driver/clk issues.
Queued by Paul Walmsley <paul@pwsan.com>:
Add hwmod and PRCM data for the TI AM43xx family of SoCs.
Under normal circumstances, these patches would not be merged.
The hwmod and PRCM data should be moved out either to DT data or
to drivers/. Also, the current implementation trades off lines
of diff by dynamically rewriting static data at runtime, which is
a bad practice - it causes future maintenance headaches.
However, after speaking with my upstream, it sounds like it's
better to merge these patches in their current state, due to long
term considerations.
Basic test logs are here:
http://www.pwsan.com/omap/testlogs/am43xx_support_v3.13/
20131015213706/
Due to the lack of an AM43xx board and any available public
documentation, it's impossible for me to review or test that
platform in any meaningful way. But at least the tests above
verify that the patches don't affect existing platforms -
particularly AM33xx.
Tony Lindgren [Thu, 17 Oct 2013 18:07:17 +0000 (11:07 -0700)]
Merge tag 'omap-for-v3.13/board-removal-signed' into omap-for-v3.13/tmp-merge
Changes needed to drop legacy booting support for some
omap3 boards.
Note that that these are based on a merge of the
following for the dependencies:
- v3.12-rc5 for fixes to pinctrl mask
- omap-for-v3.13/dt-signed to avoid pointless merge conflicts
- omap-for-v3.13/quirk-signed for legacy pdata handling
Tony Lindgren [Thu, 17 Oct 2013 17:37:27 +0000 (10:37 -0700)]
Merge tag 'for-v3.13/am43xx-support' of git://git./linux/kernel/git/pjw/omap-pending into omap-for-v3.13/hwmod
Add hwmod and PRCM data for the TI AM43xx family of SoCs.
Under normal circumstances, these patches would not be merged.
The hwmod and PRCM data should be moved out either to DT data or
to drivers/. Also, the current implementation trades off lines
of diff by dynamically rewriting static data at runtime, which is
a bad practice - it causes future maintenance headaches.
However, after speaking with my upstream, it sounds like it's
better to merge these patches in their current state, due to long
term considerations.
Basic test logs are here:
http://www.pwsan.com/omap/testlogs/am43xx_support_v3.13/
20131015213706/
Due to the lack of an AM43xx board and any available public
documentation, it's impossible for me to review or test that
platform in any meaningful way. But at least the tests above
verify that the patches don't affect existing platforms -
particularly AM33xx.
Sourav Poddar [Tue, 15 Oct 2013 05:37:27 +0000 (11:07 +0530)]
ARM: OMAP2: hwmod: Add qspi data for am437x.
Add hwmod data for qspi for AM437x.
Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tony Lindgren [Mon, 14 Oct 2013 18:31:44 +0000 (11:31 -0700)]
ARM: OMAP2+: Remove legacy support for zoom platforms
We now have pretty decent device tree based support for
zoom platforms. It's not complete, but basics work for
me so adding more features should be quite trivial.
Looks like also 3630 sdp is zoom based, and looking
at it's board file should also be trivial to support
with the device tree based booting.
Patches are welcome if people are still using these.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 14 Oct 2013 18:31:43 +0000 (11:31 -0700)]
ARM: OMAP2+: Remove legacy booting support for omap3 EVM
We now have pretty decent support with the device tree
based booting. Patches to add more features are welcome.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Aaro Koskinen [Mon, 14 Oct 2013 18:30:45 +0000 (11:30 -0700)]
ARM: OMAP2: delete board-rm680
Delete board file for Nokia RM-680/RM-696 (N950/N9). DT-based booting
should be used for further development on this HW.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Aaro Koskinen [Tue, 15 Oct 2013 20:36:09 +0000 (23:36 +0300)]
ARM: dts: add minimal DT support for Nokia N950 & N9 phones
Add minimal DT support for Nokia N950 & N9 phones. The same functionality
that is provided by the current board file should work: serial console,
USB, OneNAND and MMC.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 14 Oct 2013 18:31:43 +0000 (11:31 -0700)]
ARM: dts: Add basic support for zoom3
I've tested serial, MMC, smsc911x and wl12xx on zoom3. As my
omap is an early ES revision, I have not been able to test
off-idle on this one. But anyways, I'd say we have enough
device tree support for the zoom to be able to drop the
board-zoom files. Patches are welcome to add further features
to this .dts file.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 14 Oct 2013 18:31:43 +0000 (11:31 -0700)]
ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM)
I've tested the serial, MMC, smsc911x, wl12xx, and off-idle support
with the pinctrl patches, so it probably works better than the
board-*.c files ever did. Also the board-omap3evm.c file is broken
for the DSS, and has been for a while. Patches are welcome to fix
it in this .dts file, let's just drop the board-*.c file for this.
Note that off-idle currently requires doing request_irq() on the
wake-up pin from pinctrl-single IRQ domain until we can handle
that in some Linux generic way.
[tony@atomide.com: updated for make dtbs build fix]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 14 Oct 2013 18:31:43 +0000 (11:31 -0700)]
ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM)
I've tested the serial, MMC, smsc911x, wl12xx, and off-idle support
with the pinctrl patches, so it probably works better than the
board-*.c files ever did. Also the board-omap3evm.c file is broken
for the DSS, and has been for a while. Patches are welcome to fix
it in this .dts file, let's just drop the board-*.c file for this.
Note that off-idle currently requires doing request_irq() on the
wake-up pin from pinctrl-single IRQ domain until we can handle
that in some Linux generic way.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 14 Oct 2013 18:31:42 +0000 (11:31 -0700)]
ARM: dts: Add common support for omap3-evm
Looks like the main difference between the TMDSEVM3530 and
TMDSEVM3730 is just the omap processor:
http://www.ti.com/tool/tmdsevm3530
http://www.ti.com/tool/tmdsevm3730
So let's add a common file for the EVMs, and fix the description
for the omap3-evm.dst as that's clearly for the TMDSEVM3530
since it includes omap34xx.dtsi. It cannot support the TMDSEVM3730
properly, and we need a separate file for that in the following
patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 14 Oct 2013 18:31:42 +0000 (11:31 -0700)]
ARM: dts: Shared file for omap GPMC connected smsc911x
Looks like at least Igep, Zoom and EVM boards can use a
common file for the GPMC connected smsc911x.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 14 Oct 2013 18:33:07 +0000 (11:33 -0700)]
Merge branches 'omap-for-v3.13/dt' and 'omap-for-v3.13/quirk' into omap-for-v3.13/board-removal
We need the fixes in v3.12-rc5, dts changes in omap-for-v3.13/dt, and
the platform data quirk changes in omap-for-v3.13/quirk to start
removing omap3 board files without breaking things.
Tony Lindgren [Mon, 14 Oct 2013 17:47:52 +0000 (10:47 -0700)]
Merge branch 'omap-for-v3.13/tmp-merge'
George Cherian [Mon, 14 Oct 2013 12:36:24 +0000 (18:06 +0530)]
ARM: OMAP2+: hwmod: Add USB hwmod data for AM437x.
Add hwmod for USBSS and the OCP2SCP for AM437x.
AM437x has got 2 instances of USBSS.
Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Ambresh K [Sat, 12 Oct 2013 10:16:37 +0000 (15:46 +0530)]
ARM: OMAP2+: AM43x PRCM init
Initialise AM43x HWMOD, powerdomains and clockdomains.
Signed-off-by: Ambresh K <ambresh@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Afzal Mohammed [Sat, 12 Oct 2013 10:16:28 +0000 (15:46 +0530)]
ARM: OMAP2+: AM43x: PRCM kbuild
Build AM43x power domain, clock domain and hwmod data.
Many of AM43x IP's and interconnects are similar as that in AM335x,
hence AM335x hwmod data is being reused with necessary changes.
Earlier the plan was to reuse AM335x specific PRCM code, but as AM43x
PRCM register layout is much similar to OMAP4/5, AM335x PRCM is
divorced and instead married with OMAP4/5 PRCM for AM43x.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Afzal Mohammed [Sat, 12 Oct 2013 10:16:20 +0000 (15:46 +0530)]
ARM: OMAP2+: hwmod: AM43x operations
Reuse OMAP4 operations on AM43x.
Context related ops are not used on AM43x, as this would not add value
when using DT and AM43x is DT only boot. This additionally helps not to
add context register offset for each hwmod.
Signed-off-by: Ambresh K <ambresh@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Afzal Mohammed [Sat, 12 Oct 2013 10:16:12 +0000 (15:46 +0530)]
ARM: OMAP2+: hwmod: AM43x support
Add hwmod support for IP's that are present in AM43x, but not in AM335x.
AM43x additional ones added here are,
1. synctimer
2. timer8-11
3. ehrpwm3-5
4. spi2-4
5. gpio4-5
AM43x pruss interconnect which is different as compared to AM335x, has
been taken care.
And register offsets for same hwmod's shared with AM335x is different,
AM43x register offsets are updated appropriately.
ocp clock of those in l4_wkup is fed from "sys_clkin_ck" instead of
"dpll_core_m4_div2_ck", so "ocpif" for those in AM43x l4_wkup has been
added seperately.
hwmod's has been added for those that have main clock (wkup_m3, control,
gpio0) and clock domain (l4_hs) different from AM335x. debugss and
adc_tsc that have different clocks and clockdomains repectively has not
been added due to the reasons mentioned below.
AM43x also has IP's like qspi, hdq1w, vpfe, des, rng, usb, dss, debugss,
adc_tsc. These are not handled here due to both/either of following
reasons,
1. To avoid churn; most of them don't have DT bindings, which would
necessitate adding address space in hwmod, which any way would have
to be removed once DT bindings happen with driver support.
2. patches would come in from sources other than the author
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Ambresh K [Sat, 12 Oct 2013 10:16:03 +0000 (15:46 +0530)]
ARM: OMAP2+: CM: AM43x clockdomain data
Add the data file to describe clock domains in AM43x SoC.
OMAP4 clockdomain operations is being reused here.
Signed-off-by: Ambresh K <ambresh@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Ambresh K [Sat, 12 Oct 2013 10:15:54 +0000 (15:45 +0530)]
ARM: OMAP2+: PM: AM43x powerdomain data
Add the data file to describe all power domains in AM43x SoC.
OMAP4 powerdomain operations is being reused here.
Signed-off-by: Ambresh K <ambresh@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Afzal Mohammed [Sat, 12 Oct 2013 10:15:45 +0000 (15:45 +0530)]
ARM: OMAP2+: PRCM: AM43x definitions
Add AM43x CMINST, CDOFFS, RM_RSTST & RM_RSTCTRL definitions - minimal
ones that would be used.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Afzal Mohammed [Sat, 12 Oct 2013 10:15:36 +0000 (15:45 +0530)]
ARM: OMAP2+: hwmod: AM335x: remove static register offs
Hwmod common to AM43x and AM335x has register offsets different. It is
now updated based on SoC detection at run time, hence remove statically
initialized ones.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Afzal Mohammed [Sat, 12 Oct 2013 10:15:26 +0000 (15:45 +0530)]
ARM: OMAP2+: hwmod: AM335x: runtime register update
Most of IP's in AM335x is present on AM43x and so in those cases both
will use same hwmod database (except for a few cases where clock related
details differ), but there is difference w.r.t register offset between
these. Update register offsets at runtime based on the SoC detected to
help in sharing otherwise same hwmod.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Afzal Mohammed [Sat, 12 Oct 2013 10:14:46 +0000 (15:44 +0530)]
ARM: OMAP2+: hwmod: AM335x/AM43x: move common data
AM335x and AM43x have most of the IP's and interconnect's similar.
Instead of adding redundant hwmod data, move interconnects and hwmod
similar between AM335x and AM43x to a common location. This helps in
reuse on AM43x.
AM335x interconnects that has difference and not present in AM43x are
not moved. ocp clock of those in l4_wkup is fed from a different source
for AM43x. Also pruss interconnect is different.
AM335x hwmod's that has difference other than prcm register offsets
(difference is in clocks of wkup_m3, control, gpio0, debugss and clock
domain of l4_hs, adc_tsc as compared to AM43x) and those that are not
present in AM43x are not moved.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Ankur Kishore [Sat, 12 Oct 2013 10:14:21 +0000 (15:44 +0530)]
ARM: OMAP2+: CM: cm_inst offset s16->u16
Most of the AM43x CM reg address offsets are with MSB bit '1' (on
16-bit value) leading to arithmetic miscalculations while calculating
CLOCK ENABLE register's address because cm_inst field was a type of
"const s16", so make it "const u16".
Also modify relevant functions so as to take care of the above.
[afzal@ti.com: fixup and cleanup]
Signed-off-by: Ankur Kishore <a-kishore@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Linus Torvalds [Sun, 13 Oct 2013 22:41:28 +0000 (15:41 -0700)]
Linux 3.12-rc5
Linus Torvalds [Sun, 13 Oct 2013 18:41:26 +0000 (11:41 -0700)]
Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
"This will fix a deadlock on the ts72xx_wdt driver, fix bitmasks in the
kempld_wdt driver and fix a section mismatch in the sunxi_wdt driver"
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: sunxi: Fix section mismatch
watchdog: kempld_wdt: Fix bit mask definition
watchdog: ts72xx_wdt: locking bug in ioctl
git.openpandora.org / pandora-kernel.git / log