Tony Lindgren [Fri, 30 Nov 2007 19:57:13 +0000 (11:57 -0800)]
ARM: OMAP: Misc minor clean-up for upstream merge
Misc minor clean-up for upstream merge
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 28 Nov 2007 23:33:49 +0000 (15:33 -0800)]
DSP: Clean up memory allocation return values
Clean up memory allocation return values
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 28 Nov 2007 05:13:02 +0000 (21:13 -0800)]
DSP: Move dspgateway to drivers/dsp/dspgateway
Move dspgateway to drivers/dsp/dspgateway
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 28 Nov 2007 04:37:53 +0000 (20:37 -0800)]
DSP: Move code to use only one dsp_common.h
Remove arch-arm/plat-omap/dsp/dsp_common.h, and move
definitions to include/asm-arm/arch-omap/dsp_common.h.
This is done in order to prepare dsp for moving to live
under drivers. No functional changes.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 28 Nov 2007 22:06:26 +0000 (14:06 -0800)]
Merge current mainline tree into linux-omap tree
Merge branches 'master' and 'linus'
sshahrom@micron.com [Wed, 28 Nov 2007 21:48:46 +0000 (13:48 -0800)]
OMAP: 2430sdp board support for 2K page nand
Add support for 2k Page nand with Enabled HW ECC on omap2430 v4.0. and v5. It has been Tested with Micron Nand.
Signed-off-by: Shahrom Sharif-Kashani <sshahrom <at> micron.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
sshahrom@micron.com [Wed, 28 Nov 2007 21:48:12 +0000 (13:48 -0800)]
MTD: NAND: Add omap support for 2K page nand
Add support for 2k Page nand with Enabled HW ECC on omap2430
v4.0. and v5. It has been Tested with Micron Nand.
Signed-off-by: Shahrom Sharif-Kashani <sshahrom@micron.com>
Moved defines from nand.h to omap2.c, cleaned up spacing and
comments a bit.
Signed-off-by: Tony Lindgren <tony@atomide.com>
David Brownell [Sat, 24 Nov 2007 07:20:36 +0000 (23:20 -0800)]
tsc210x build fixes
Build fixes for the tsc210x driver.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Sat, 24 Nov 2007 07:20:05 +0000 (23:20 -0800)]
i2c init section fixes
Fix init section warnings in the new i2c init code. It's
wrong to call "__init" functions from non-__init ones.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Carlos Eduardo Aguiar [Mon, 26 Nov 2007 16:01:41 +0000 (12:01 -0400)]
MMC: OMAP: Enabling MMC/SD card support option on n800_defconfig
Enables MMC/SD card support option on n800_defconfig to use MMC multislot support.
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Refreshed to apply after Lauri's patch. Also left out
CONFIG_MMC_BLOCK_BOUNCE as omap MMC supports SG.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Linus Torvalds [Wed, 28 Nov 2007 02:54:17 +0000 (18:54 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
ocfs2: reverse inline-data truncate args
ocfs2: Fix comparison in ocfs2_size_fits_inline_data()
ocfs2: Remove bug statement in ocfs2_dentry_iput()
[PATCH] ocfs2: Remove expensive bitmap scanning
ocfs2: log valid inode # on bad inode
ocfs2: Filter -ENOSPC in mlog_errno()
[PATCH] fs/ocfs2: Add missing "space"
ocfs2: Reset journal parameters after s_mount_opt update
Linus Torvalds [Wed, 28 Nov 2007 02:54:08 +0000 (18:54 -0800)]
Merge branch 'for-linus' of git://linux-m32r.org/git/takata/linux-2.6_dev
* 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev:
m32r: Update sys_rt_sigsuspend
m32r: Ignore warnings for unused syscalls
m32r: Add missing syscalls
Eduardo Valentin [Wed, 21 Nov 2007 22:23:05 +0000 (18:23 -0400)]
ARM: OMAP1: Camera: Removes unused files
Removing duplicated and unused files from camera driver
for omap1.
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Eduardo Valentin [Wed, 21 Nov 2007 22:23:04 +0000 (18:23 -0400)]
ARM: OMAP1: Camera: Fix v4l2 int device detach
camera_device_unregister expected the argument to be its own
device structure but it's actually that of its slave.
Also get master from slave's structure in camera_device_register.
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Eduardo Valentin [Wed, 21 Nov 2007 22:23:03 +0000 (18:23 -0400)]
ARM: OMAP1: Camera: Update videobuf utilization
This patch updates the camera_core.[c,h] to use corretly the new
v4l2 videobuf API.
Also removes VIDEO_BUF reference from Kconfig and adds the correct
dependencies.
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Lauri Leukkunen [Fri, 23 Nov 2007 00:38:37 +0000 (02:38 +0200)]
OMAP: Add temporary NOKIA_N810 machine type
This patch should be dropped once the official machine type
is available in the tree.
Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Lauri Leukkunen [Fri, 23 Nov 2007 00:38:38 +0000 (02:38 +0200)]
OMAP: Update n800_defconfig
Enable N810 and lzo support for jffs2.
Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Lauri Leukkunen [Fri, 23 Nov 2007 00:38:36 +0000 (02:38 +0200)]
OMAP: Initial N810 support
Built alongside N800 sharing most of the init code through
board-n800.h. Bootloader tag array size is increased from
512 to 1024.
Many drivers are still missing or don't work correctly,
but at least serial console is functional and jffs2 works
with lzo compression.
Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 28 Nov 2007 02:07:00 +0000 (18:07 -0800)]
musb_hdrc: Fixes to make host features work again
Fixes to make host features work again
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Mon, 26 Nov 2007 16:01:58 +0000 (12:01 -0400)]
MMC: OMAP: Make board-h2.c uses new board-h2-mmc.c code
Make board-h2.c file uses new board-h2-mmc.c code.
This patch also:
- Introduces a new gpio_switch to get events when inserting and removing
MMC/SD/SDIO cards to/from the slot.
- Enables the following options on omap_h2_1610_defconfig to use
multislot support:
- GPIO switch support
- MMC/SD card support
- VFAT fs support
- NLS ISO 8859-1
Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Anderson Briglia <anderson.briglia@indt.org.br>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: David Cohen <david.cohen@indt.org.br>
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Mon, 26 Nov 2007 16:01:54 +0000 (12:01 -0400)]
MMC: OMAP: Supporting MMC multislot structures for TI OMAP H2 board
Proposes the new board-h2-mmc.c file to handle all the mmc
specific code for multislot support.
Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Anderson Briglia <anderson.briglia@indt.org.br>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: David Cohen <david.cohen@indt.org.br>
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Mon, 26 Nov 2007 16:01:49 +0000 (12:01 -0400)]
MMC: OMAP: Make board-h3.c uses new board-h3-mmc.c code
Make board-h3.c file uses new board-h3-mmc.c code.
This patch also:
- Introduces a new gpio_switch to get events when inserting and removing
MMC/SD/SDIO cards to/from the slot.
- Enables the following options on omap_h3_1710_defconfig to use
multislot support:
- GPIO switch support
- MSDOS fs support
- VFAT fs support
- Codepage 437
- NLS ISO 8859-1
Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Anderson Briglia <anderson.briglia@indt.org.br>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: David Cohen <david.cohen@indt.org.br>
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Mon, 26 Nov 2007 16:01:45 +0000 (12:01 -0400)]
MMC: OMAP: Supporting MMC multislot structures for TI OMAP H3 board
Proposes the new board-h3-mmc.c file to handle all the mmc
specific code for multislot support.
Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Anderson Briglia <anderson.briglia@indt.org.br>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: David Cohen <david.cohen@indt.org.br>
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Carlos Eduardo Aguiar [Mon, 26 Nov 2007 16:01:41 +0000 (12:01 -0400)]
MMC: OMAP: Enabling MMC/SD card support option on n800_defconfig
Enables MMC/SD card support option on n800_defconfig to use MMC multislot support.
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Jarkko Lavinen [Mon, 26 Nov 2007 16:01:38 +0000 (12:01 -0400)]
MMC: OMAP: Modifications at N800 MMC board specific file to work MMC multislot support
Modifications at board-n800-mmc.c and board-n800.c files to work with MMC multislot support.
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Carlos Eduardo Aguiar [Mon, 26 Nov 2007 16:01:34 +0000 (12:01 -0400)]
PLAT: OMAP: Modifications at devices.c and mmc.h to use multislot structures
Modifications at arch/arm/plat-omap/devices.c and include/asm-arm/arch-omap/mmc.h
to use multislot structures.
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Carlos Eduardo Aguiar [Mon, 26 Nov 2007 16:01:31 +0000 (12:01 -0400)]
MMC: OMAP: Using setup_timer instead of init_timer
Using setup_timer() instead of init_timer on omap.c file.
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Jarkko Lavinen [Mon, 26 Nov 2007 16:01:27 +0000 (12:01 -0400)]
MMC: OMAP: Abort stuck commands
When a card is removed while it is being accessed, a command can get stuck so
that no timeout or end of command interrupt ever occurs. The command getting
stuck is almost always CDM12, but also the other commands can get stuck. Catch
a stuck command with a timer and try sending the initiliazation stream until
the controller starts running again and responds with the end of command
status.
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Juha Yrjola [Mon, 26 Nov 2007 16:01:22 +0000 (12:01 -0400)]
MMC: OMAP: General cleanup for MMC multislot support
General code cleanup, modifications at some dev_* functions and
other hacks at mmc_omap_irq() for MMC multislot support.
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Juha Yrjola [Mon, 26 Nov 2007 16:01:18 +0000 (12:01 -0400)]
MMC: OMAP: Power functions modified to MMC multislot support
Modifications at power functions to MMC multislot support. This patch
also move board-specific code out of MMC OMAP driver.
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Juha Yrjola [Mon, 26 Nov 2007 16:01:13 +0000 (12:01 -0400)]
MMC: OMAP: Fix timeout calculation for MMC multislot support
Fix the data timeout calculation for MMC multislot support.
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Juha Yrjola [Mon, 26 Nov 2007 16:01:09 +0000 (12:01 -0400)]
MMC: OMAP: New release dma and abort xfer functions
New functions to support MMC multislot:
mmc_omap_release_dma() and mmc_omap_abort_xfer().
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Juha Yrjola Juha Yrjola [Wed, 28 Nov 2007 00:13:30 +0000 (16:13 -0800)]
MMC: OMAP: Add back cover switch support
This patch adds back MMC cover switch support in a way that
supports multiple slots.
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Juha Yrjola [Wed, 28 Nov 2007 01:50:42 +0000 (17:50 -0800)]
OMAP: MMC: Introduce new multislot structure and change driver to use it
Introduce new MMC multislot structure and change driver to use it.
Note that MMC clocking is now enabled in mmc_omap_select_slot()
and disabled in mmc_omap_release_slot().
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Tue, 27 Nov 2007 23:53:02 +0000 (15:53 -0800)]
MMC: OMAP: Remove cover switch handling to allow adding multislot support
This patch removes the MMC cover switch handling temporarily
to make following multislot patches cleaner.
MMC cover switch handling will be added back in later patches
after adding basic multislot support.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Carlos Eduardo Aguiar [Sat, 24 Nov 2007 22:29:43 +0000 (18:29 -0400)]
OMAP: DMA: Attribution necessary only if the ch is not chained.
Attribution necessary only if the ch is not chained on arch/arm/plat-omap/dma.c
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Ragner Magalhaes <ragner.magalhaes@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Mark Fasheh [Tue, 20 Nov 2007 19:56:39 +0000 (11:56 -0800)]
ocfs2: reverse inline-data truncate args
ocfs2_truncate() and ocfs2_remove_inode_range() had reversed their "set
i_size" arguments to ocfs2_truncate_inline(). Fix things so that truncate
sets i_size, and punching a hole ignores it.
This exposed a problem where punching a hole in an inline-data file wasn't
updating the page cache, so fix that too.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Mark Fasheh [Tue, 20 Nov 2007 19:48:41 +0000 (11:48 -0800)]
ocfs2: Fix comparison in ocfs2_size_fits_inline_data()
This was causing us to prematurely push out inline data by one byte.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Mark Fasheh [Thu, 8 Nov 2007 00:35:14 +0000 (16:35 -0800)]
ocfs2: Remove bug statement in ocfs2_dentry_iput()
The existing bug statement didn't take into account unhashed dentries which
might not have a cluster lock on them. This could happen if a node exporting
the file system via NFS is rebooted, re-exported to nfs clients and then
unmounted. It's fine in this case to not have a dentry cluster lock.
Just remove the bug statement and replace it with an error print, which
does the proper checks. Though we want to know if something has happened
which might have prevented a cluster lock from being created, it's
definitely not necessary to panic the machine for this.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Jan Kara [Tue, 13 Nov 2007 18:59:33 +0000 (19:59 +0100)]
[PATCH] ocfs2: Remove expensive bitmap scanning
Enable expensive bitmap scanning only if DEBUG option is enabled.
The bitmap scanning quite loads the CPU and on my machine the write
throughput of dd if=/dev/zero of=/ocfs2/file bs=1M count=500 conv=sync
improves from 37 MB/s to 45.4 MB/s in local mode...
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Mark Fasheh [Tue, 20 Nov 2007 02:40:16 +0000 (18:40 -0800)]
ocfs2: log valid inode # on bad inode
If the inode block isn't valid then we don't want to print the value from
that, instead print the block number which was passed in (which should
always be correct). Also, turn this into a debug print for now - folks who
hit an actual problem always have other logs indicating what the source is.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Mark Fasheh [Tue, 20 Nov 2007 02:31:17 +0000 (18:31 -0800)]
ocfs2: Filter -ENOSPC in mlog_errno()
It's almost never worth printing in that situation and we keep forgetting to
manually filter it out.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Joe Perches [Tue, 20 Nov 2007 01:53:34 +0000 (17:53 -0800)]
[PATCH] fs/ocfs2: Add missing "space"
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Mark Fasheh [Wed, 7 Nov 2007 22:21:45 +0000 (14:21 -0800)]
ocfs2: Reset journal parameters after s_mount_opt update
Right now we're just setting them from the existing parameters, not the
new ones that a remount specified.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Linus Torvalds [Tue, 27 Nov 2007 22:29:03 +0000 (14:29 -0800)]
Merge git://git./linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
ide-scsi: use print_hex_dump from <linux/kernel.h>
ide: More TSST drives with broken cable detection
ali14xx: constify __initdata
ide: remove bogus ide_fix_driveid() comment
trm290: remove bogus init_hwif_trm290() comment
piix: add HP compaq laptop to short cable list
alim15x3: add Mitac 8317 and derivatives to ali_cable_override()
ide: add TORiSAN model: CD-ROM CDR_U200 fw: 1.09 to DMA blacklist
amd74xx: arm hack
drivers/ide: Add missing "space"
ide-cris: don't override ide_register_hw() result
ide: move CONFIG_IDE_ETRAX to drivers/ide/Kconfig
ide: add CONFIG_IDE_H8300 config option
ide/Kconfig: fix mpc8xx host driver dependencies
macide/q40ide: add missing __init tag to {macide,q40ide}_init()
aec62xx: Fix kernel oops in driver's probe function
ide: skip ide_wait_not_busy() on noprobe-disks
siimage: remove resetproc() method
ide: don't set PIO mode on pre-EIDE drives
sis5513.c: Add Packard Bell EasyNote K5305 to laptops
Linus Torvalds [Tue, 27 Nov 2007 22:27:56 +0000 (14:27 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/avi/kvm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
KVM: SVM: Fix FPU leak while emulating clts
KVM: SVM: Unload guest fpu on vcpu_put()
KVM: x86 emulator: Use emulator_write_emulated and not emulator_write_std
KVM: x86 emulator: fix the saving of of the eip value
KVM: x86 emulator: fix JMP_REL
Linus Torvalds [Tue, 27 Nov 2007 22:21:19 +0000 (14:21 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
scatterlist: add more safeguards
Revert "ll_rw_blk: temporarily enable max_segments tweaking"
mmc: Add missing sg_init_table() call
block: Fix memory leak in alloc_disk_node()
alpha: fix sg_page breakage
blktrace: Make sure BLKTRACETEARDOWN does the full cleanup.
Linus Torvalds [Tue, 27 Nov 2007 22:20:51 +0000 (14:20 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/iser: Add missing counter increment in iser_data_buf_aligned_len()
IB/ehca: Fix static rate regression
mlx4_core: Fix state check in mlx4_qp_modify()
IB/ipath: Normalize error return codes for posting work requests
IB/ipath: Fix offset returned to ibv_modify_srq()
IB/ipath: Fix error path in QP creation
IB/ipath: Fix offset returned to ibv_resize_cq()
Linus Torvalds [Tue, 27 Nov 2007 22:20:35 +0000 (14:20 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: adds the context menu key (HUT GenDesc 0x84)
Input: add definitions for frame forward and frame back keys
Input: bf54x-keys - keypad does not exist on BF544 parts
Input: gpio-keys - request and configure GPIOs
Input: i8042 - add i8042.noloop quirk for MS Virtual Machine
Sonypi: use synchronize_irq instead of sycnronize_sched
sonypi: fit input devices into sysfs tree
sony-laptop: fit input devices into sysfs tree
Denis Cheng [Tue, 27 Nov 2007 20:35:58 +0000 (21:35 +0100)]
ide-scsi: use print_hex_dump from <linux/kernel.h>
these utilities implemented in lib/hexdump.c are more handy, please use this.
Bart:
- s/KERN_DEBUG/KERN_CONT/ as pointed out by Randy
- s/DUMP_PREFIX_OFFSET/DUMP_PREFIX_NONE/
- don't include ASCII dump
- respect 80-columns limit
Signed-off-by: Denis Cheng <crquan@gmail.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Peter Missel [Tue, 27 Nov 2007 20:35:57 +0000 (21:35 +0100)]
ide: More TSST drives with broken cable detection
Add more TSST (Toshiba/Samsung) drives to the
'broken cable detection' blacklist.
Signed-off-by: Peter Missel (peter.missel@onlinehome.de)
Cc: Alan Cox <alan@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Tue, 27 Nov 2007 20:35:57 +0000 (21:35 +0100)]
ali14xx: constify __initdata
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Tue, 27 Nov 2007 20:35:57 +0000 (21:35 +0100)]
ide: remove bogus ide_fix_driveid() comment
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Tue, 27 Nov 2007 20:35:56 +0000 (21:35 +0100)]
trm290: remove bogus init_hwif_trm290() comment
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Tue, 27 Nov 2007 20:35:56 +0000 (21:35 +0100)]
piix: add HP compaq laptop to short cable list
Port of Jeff's libata commit
54174db300ee1bac632d62e4ac37fe02e47d1f18
("[libata] ata_piix: add HP compaq laptop to short cable list").
Cc: Jeff Garzik <jeff@garzik.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Tue, 27 Nov 2007 20:35:56 +0000 (21:35 +0100)]
alim15x3: add Mitac 8317 and derivatives to ali_cable_override()
Port of Alan's patch for pata_ali.c.
Cc: Alan Cox <alan@redhat.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Tue, 27 Nov 2007 20:35:56 +0000 (21:35 +0100)]
ide: add TORiSAN model: CD-ROM CDR_U200 fw: 1.09 to DMA blacklist
Based on the report from snowbat@gmail.com.
Fixes kernel bugzilla bug #9195.
Tested-by: snowbat@gmail.com
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Andrew Morton [Tue, 27 Nov 2007 20:35:56 +0000 (21:35 +0100)]
amd74xx: arm hack
drivers/ide/pci/amd74xx.c: In function `init_hwif_amd74xx':
drivers/ide/pci/amd74xx.c:387: error: implicit declaration of function `pci_get_legacy_ide_irq'
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Joe Perches [Tue, 27 Nov 2007 20:35:55 +0000 (21:35 +0100)]
drivers/ide: Add missing "space"
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Tue, 27 Nov 2007 20:35:55 +0000 (21:35 +0100)]
ide-cris: don't override ide_register_hw() result
* Don't override ide_register_hw() result and check if there is a hwif
available to use.
* MAX_HWIFS is user configurable nowadays so replace it by hard-coded value.
* Remove the comment about ide_hwifs[].
Acked-by: Mikael Starvik <starvik@axis.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Tue, 27 Nov 2007 20:35:55 +0000 (21:35 +0100)]
ide: move CONFIG_IDE_ETRAX to drivers/ide/Kconfig
* Move ETRAX_IDE and friends from arch/cris/arch-{v10,v32}/drivers/Kconfig
to drivers/ide/Kconfig.
* Don't force selecting ide-disk and ide-cd device drivers
(please handle this through defconfig if necessary).
* Make ETRAX_IDE depend on BROKEN for the time being
(it doesn't even compile currently).
Cc: Mikael Starvik <starvik@axis.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Tue, 27 Nov 2007 20:35:54 +0000 (21:35 +0100)]
ide: add CONFIG_IDE_H8300 config option
Add a separate config option for ide-8300 host driver instead of depending
on CONFIG_H8300.
This change is a preparation for the future changes and also allows ide-h8300
to be disabled if needed.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Tue, 27 Nov 2007 20:35:54 +0000 (21:35 +0100)]
ide/Kconfig: fix mpc8xx host driver dependencies
Only LWMON, IVMS8, IVML24 and TQM8xxL platforms have the needed
defines (IDE0_BASE_OFFSET and friends) in the platform header file.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Tue, 27 Nov 2007 20:35:54 +0000 (21:35 +0100)]
macide/q40ide: add missing __init tag to {macide,q40ide}_init()
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Aleksandar Radovanovic [Tue, 27 Nov 2007 20:35:53 +0000 (21:35 +0100)]
aec62xx: Fix kernel oops in driver's probe function
Add pci_enable_device() to aec62xx probe function
before doing any I/O.
Original probe function tries to read from device's
PCI region 4 before calling ide_setup_pci_device().
Since the device is not enabled at this point,
on machines that have no firmware PCI initialization
(e.g. ASUS WL-700gE router), corresponding PCI BAR
is 0 and the following inb() causes a kernel oops.
Signed-off-by: Aleksandar Radovanovic <biblbroks@sezampro.yu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Jonas Stare [Tue, 27 Nov 2007 20:35:53 +0000 (21:35 +0100)]
ide: skip ide_wait_not_busy() on noprobe-disks
There is a problem in some hardware where the kernel will stall for
35 seconds waiting for disks that don't exist. This patch will skip
waiting for the BSY-bit on IDE drives to go away if you set "hdx=noprobe"
as a kernel option and the disk is not marked as 'present' (like when
you set the geometry by hand).
If no noprobe-option is set the code will work (more or less) as the
original but if set the code will skip the ide_wait_not_busy() for
that drive. Even if there would be a drive there and it is still busy
afterwards it should not matter since it isn't probed for later.
The code also honors the MAX_DRIVES variable instead of assuming that
there will be two harddrives on the bus.
Bart: minor cleanups
Signed-off-by: Jonas Stare <jonas.stare@purplescout.se>
CC: Andrew Morton <akpm@linux-foundation.org>,
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Sergei Shtylyov [Tue, 27 Nov 2007 20:35:53 +0000 (21:35 +0100)]
siimage: remove resetproc() method
The intent behind siimage_reset() was probably to hard reset the interface and
the SATA PHY but as the code writes to two reserved bits instead, it obviously
has been ineffective from the start. So, just remove it.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Sergei Shtylyov [Tue, 27 Nov 2007 20:35:52 +0000 (21:35 +0100)]
ide: don't set PIO mode on pre-EIDE drives
Fix handling of the PIO modes for the pre-EIDE drives that did not support
the PIO Flow Control Transfer Mode value (00001 nnn) of the Set Transfer Mode
feature by skipping the actual mode programming.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Gabriel Craciunescu [Tue, 27 Nov 2007 20:35:52 +0000 (21:35 +0100)]
sis5513.c: Add Packard Bell EasyNote K5305 to laptops
With newer kernels HDD in my old laptop is limited to UDMA 33.
With this patch I get UDMA 100 again.
Signed-off-by: Gabriel Craciunescu <nix.or.die@googlemail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Hirokazu Takata [Wed, 12 Sep 2007 08:51:35 +0000 (17:51 +0900)]
m32r: Update sys_rt_sigsuspend
Update sys_rt_sigsuspend() of arch/m32r/signal.c.
This modification is derived from generic one of kernel/signal.c.
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Hirokazu Takata [Thu, 13 Sep 2007 09:31:34 +0000 (18:31 +0900)]
m32r: Ignore warnings for unused syscalls
checksyscalls.sh reports warnings for missing syscalls.
But, on m32r, some legacy syscalls were removed elaborately.
This patch kills warnings for obsolete syscalls, which are
no longer used in the m32r kernel.
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Hirokazu Takata [Wed, 12 Sep 2007 08:46:53 +0000 (17:46 +0900)]
m32r: Add missing syscalls
Add the following 39 syscalls for m32r:
sys_add_key, sys_request_key, sys_keyctl, sys_ioprio_set,
sys_ioprio_get, sys_inotify_init, sys_inotify_add_watch,
sys_inotify_rm_watch, sys_migrate_pages, sys_openat,
sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat,
sys_fstatat64, sys_unlinkat, sys_renameat, sys_linkat,
sys_symlinkat, sys_readlinkat, sys_fchmodat, sys_faccessat,
sys_pselect6, sys_ppoll, sys_unshare, sys_set_robust_list,
sys_get_robust_list, sys_splice, sys_sync_file_range,
sys_tee, sys_vmsplice, sys_move_pages, sys_getcpu, sys_epoll_pwait,
sys_utimensat, sys_signalfd, sys_timerfd, sys_eventfd, sys_fallocate
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Amit Shah [Mon, 19 Nov 2007 15:57:35 +0000 (17:57 +0200)]
KVM: SVM: Fix FPU leak while emulating clts
The clts code didn't use set_cr0 properly, so our lazy FPU
processing wasn't being done by the clts instruction at all.
(this isn't called on Intel as the hardware does the decode for us)
Signed-off-by: Amit Shah <amit.shah@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Avi Kivity [Tue, 27 Nov 2007 13:33:10 +0000 (15:33 +0200)]
KVM: SVM: Unload guest fpu on vcpu_put()
Not unloading the guest fpu can cause fpu leaks from guest to guest (or host
to guest).
Signed-off-by: Avi Kivity <avi@qumranet.com>
Amit Shah [Sun, 18 Nov 2007 16:55:40 +0000 (22:25 +0530)]
KVM: x86 emulator: Use emulator_write_emulated and not emulator_write_std
emulator_write_std() is not implemented, and calling write_emulated should
work just as well in place of write_std.
Fixes emulator failures with the push r/m instruction.
Signed-off-by: Amit Shah <amit.shah@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Izik Eidus [Sun, 11 Nov 2007 12:46:34 +0000 (14:46 +0200)]
KVM: x86 emulator: fix the saving of of the eip value
this make sure that no matter what is the operand size,
all the value of the eip will be saved
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Izik Eidus [Sun, 11 Nov 2007 12:40:48 +0000 (14:40 +0200)]
KVM: x86 emulator: fix JMP_REL
Change JMP_REL to call to register_address_increment(): the operands size
should not effect the calculation of the eip, instead the ad_bytes should
affect it.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Tejun Heo [Tue, 27 Nov 2007 08:30:39 +0000 (09:30 +0100)]
scatterlist: add more safeguards
Add more safeguards to protect against misinterpreting a chain entry
as a normal scatterlist and vice-versa.
* Make sure the entry isn't a chain when assigning and reading a
normal sg.
* Clear offset and length when chaining.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jens Axboe [Tue, 27 Nov 2007 08:23:51 +0000 (09:23 +0100)]
Revert "ll_rw_blk: temporarily enable max_segments tweaking"
This was a temporary debugging thing for sg chaining testing, revert
it now as it has served its purpose.
This reverts commit
563063a808de6b2004d5b8a09ddcb6125481f4b2.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Haavard Skinnemoen [Fri, 23 Nov 2007 09:19:00 +0000 (10:19 +0100)]
mmc: Add missing sg_init_table() call
mmc_init_queue only initializes the scatterlists with sg_init_table()
when using a bounce buffer. This leads to a BUG() when CONFIG_DEBUG_SG
is set.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jerome Marchand [Fri, 23 Nov 2007 08:17:53 +0000 (09:17 +0100)]
block: Fix memory leak in alloc_disk_node()
Fix a memory leak in alloc_disk_node(). Don't forget to free 'dkstats' when the allocation of 'part' failed.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
FUJITA Tomonori [Wed, 21 Nov 2007 11:26:31 +0000 (12:26 +0100)]
alpha: fix sg_page breakage
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Aneesh Kumar K.V [Wed, 21 Nov 2007 11:25:41 +0000 (12:25 +0100)]
blktrace: Make sure BLKTRACETEARDOWN does the full cleanup.
if blktrace program segfault it will not be able
to call BLKTRACETEARDOWN. Now if we run the blktrace
again that would result in a failure to create the
block/<device> debugfs directory.This will result
in blk_remove_root() to be called which will set
blk_tree_root to NULL. But the debugfs block dir
still exist because it contain subdirectory.
Now if we try to fix it using BLKTRACETEARDOWN
it won't work because blk_tree_root is NULL.
Fix the same.
Tested as below
root@qemu-image:/home/kvaneesh/blktrace# ./blktrace -d /dev/hdc
Segmentation fault
root@qemu-image:/home/kvaneesh/blktrace# ./blktrace -d /dev/hdc
BLKTRACESETUP: No such file or directory
Failed to start trace on /dev/hdc
root@qemu-image:/home/kvaneesh/blktrace# ./blktrace -k /dev/hdc
root@qemu-image:/home/kvaneesh/blktrace# ./blktrace -d /dev/hdc
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Aristeu Rozanski [Tue, 27 Nov 2007 05:47:04 +0000 (00:47 -0500)]
Input: adds the context menu key (HUT GenDesc 0x84)
Signed-off-by: Aristeu Rozanski <aris@ruivo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Aristeu Rozanski [Tue, 27 Nov 2007 05:46:57 +0000 (00:46 -0500)]
Input: add definitions for frame forward and frame back keys
Signed-off-by: Aristeu Rozanski <aris@ruivo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Mike Frysinger [Tue, 27 Nov 2007 05:46:42 +0000 (00:46 -0500)]
Input: bf54x-keys - keypad does not exist on BF544 parts
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Kevin Hilman [Mon, 12 Nov 2007 23:24:04 +0000 (15:24 -0800)]
ARM: OMAP: Remove MPU-timer based sched_clock()
Remove MPU-timer based sched_clock() in favor of the common one based
on 32k sync timer which works across all OMAP1/2/3 platforms.
Using 32k based one also gives a valid sched_clock() very early in the
boot process.
Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Linus Torvalds [Tue, 27 Nov 2007 04:09:07 +0000 (20:09 -0800)]
Merge git://git./linux/kernel/git/herbert/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/net-2.6: (41 commits)
[XFRM]: Fix leak of expired xfrm_states
[ATM]: [he] initialize lock and tasklet earlier
[IPV4]: Remove bogus ifdef mess in arp_process
[SKBUFF]: Free old skb properly in skb_morph
[IPV4]: Fix memory leak in inet_hashtables.h when NUMA is on
[IPSEC]: Temporarily remove locks around copying of non-atomic fields
[TCP] MTUprobe: Cleanup send queue check (no need to loop)
[TCP]: MTUprobe: receiver window & data available checks fixed
[MAINTAINERS]: tlan list is subscribers-only
[SUNRPC]: Remove SPIN_LOCK_UNLOCKED
[SUNRPC]: Make xprtsock.c:xs_setup_{udp,tcp}() static
[PFKEY]: Sending an SADB_GET responds with an SADB_GET
[IRDA]: Compilation for CONFIG_INET=n case
[IPVS]: Fix compiler warning about unused register_ip_vs_protocol
[ARP]: Fix arp reply when sender ip 0
[IPV6] TCPMD5: Fix deleting key operation.
[IPV6] TCPMD5: Check return value of tcp_alloc_md5sig_pool().
[IPV4] TCPMD5: Use memmove() instead of memcpy() because we have overlaps.
[IPV4] TCPMD5: Omit redundant NULL check for kfree() argument.
ieee80211: Stop net_ratelimit/IEEE80211_DEBUG_DROP log pollution
...
Linus Torvalds [Tue, 27 Nov 2007 04:08:42 +0000 (20:08 -0800)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
[CRYPTO] api: Fix potential race in crypto_remove_spawn
[CRYPTO] authenc: Move initialisations up to shut up gcc
Linus Torvalds [Tue, 27 Nov 2007 03:42:59 +0000 (19:42 -0800)]
Merge git://git.linux-nfs.org/pub/linux/nfs-2.6
* git://git.linux-nfs.org/pub/linux/nfs-2.6:
NFS: Clean up new multi-segment direct I/O changes
NFS: Ensure we return zero if applications attempt to write zero bytes
NFS: Support multiple segment iovecs in the NFS direct I/O path
NFS: Introduce iovec I/O helpers to fs/nfs/direct.c
SUNRPC: Add missing "space" to net/sunrpc/auth_gss.c
SUNRPC: make sunrpc/xprtsock.c:xs_setup_{udp,tcp}() static
NFS: fs/nfs/dir.c should #include "internal.h"
NFS: make nfs_wb_page_priority() static
NFS: mount failure causes bad page state
SUNRPC: remove NFS/RDMA client's binary sysctls
kernel BUG at fs/nfs/namespace.c:108! - can be triggered by bad server
sunrpc: rpc_pipe_poll may miss available data in some cases
sunrpc: return error if unsupported enctype or cksumtype is encountered
sunrpc: gss_pipe_downcall(), don't assume all errors are transient
NFS: Fix the ustat() regression
Linus Torvalds [Tue, 27 Nov 2007 03:42:08 +0000 (19:42 -0800)]
Merge git://git./linux/kernel/git/mingo/linux-2.6-sched
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
sched: bump version of kernel/sched_debug.c
sched: fix minimum granularity tunings
sched: fix RLIMIT_CPU comment
sched: fix kernel/acct.c comment
sched: fix prev_stime calculation
sched: don't forget to unlock uids_mutex on error paths
Linus Torvalds [Tue, 27 Nov 2007 03:41:28 +0000 (19:41 -0800)]
Merge git://git./linux/kernel/git/x86/linux-2.6-x86
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
x86: fix APIC related bootup crash on Athlon XP CPUs
time: add ADJ_OFFSET_SS_READ
x86: export the symbol empty_zero_page on the 32-bit x86 architecture
x86: fix kprobes_64.c inlining borkage
pci: use pci=bfsort for HP DL385 G2, DL585 G2
x86: correctly set UTS_MACHINE for "make ARCH=x86"
lockdep: annotate do_debug() trap handler
x86: turn off iommu merge by default
x86: fix ACPI compile for LOCAL_APIC=n
x86: printk kernel version in WARN_ON and other dump_stack users
ACPI: Set max_cstate to 1 for early Opterons.
x86: fix NMI watchdog & 'stopped time' problem
Linus Torvalds [Tue, 27 Nov 2007 03:40:27 +0000 (19:40 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (56 commits)
Blackfin arch: fix bug when enable uart1 with uart0 disabled => no initial console
Blackfin arch: split apart dump_bfin_regs and merge/remove show_regs from process.c, which was largely duplicated
Blackfin arch: use common __INIT/__FINIT defines rather than setting the .section ourselves to .init.text
Blackfin arch: fix bug when sending signals with the wrong PC, cause gdb get confused
Blackfin arch: Ensure we printk out strings with the proper loglevel
Blackfin arch: Need to specify ax with the .init.text section,
Blackfin arch: Update Kconfig to latest Blackfin silicon datasheets
Blackfin arch: update defconfig files
Blackfin arch: Fix typo, and add ENDPROC - no functional changes
Blackfin arch: convert READY to DMA_READY as it causes build errors in common sound code otherwise
Blackfin arch: add defines for the on-chip L1 ROM of BF54x
Blackfin arch: cplb and map header file cleanup
Blackfin arch: cleanup the cplb declares
Blackfin arch: fix broken on BF52x, remove silly checks on processors for L1_SCRATCH defines
Blackfin arch: add support for working around anomaly
05000312
Blackfin arch: cleanup BF54x header file and add BF547 definition
Blackfin arch: fix building for BF542 processors which only have 1 TWI
Blackfin arch: rename _return_from_exception to _bfin_return_from_exception and export it
Blackfin arch: move EXPORT_SYMBOL() to C files where the symbol is actually defined
Blackfin arch: fix bug NOR Flash MTD mount fail
...
Linus Torvalds [Tue, 27 Nov 2007 03:39:55 +0000 (19:39 -0800)]
Merge git://git./linux/kernel/git/lethal/sh-2.6.24
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.24:
sh: include ax88796 in the defconfig for r7785rp
sh: include ax88796 in the defconfig for r7780mp
sh: fix R2D-1 CF support
fb: Orphan imsttfb.
sh: Update mailing list info.
sh: lockless UTLB miss fast-path.
sh: Kill off UTLB flush in fast-path.
sh: Fix copy_{to,from}_user_page() with cache disabled.
Mikulas Patocka [Thu, 22 Nov 2007 20:26:01 +0000 (21:26 +0100)]
plip: fix parport_register_device name parameter
Plip passes a string "name" that is allocated on stack to
parport_register_device. parport_register_device holds the pointer to
"name" and when the registering function exits, it points nowhere.
On some machine, this bug causes bad names to appear in /proc, such as
/proc/sys/dev/parport/parport0/devices/T^/�X^/�, on others, the plip
proc node is completely missing.
The patch also fixes documentation to note this requirement.
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mikulas Patocka [Thu, 22 Nov 2007 20:19:39 +0000 (21:19 +0100)]
plip: use netif_rx_ni() for packet receive
netif_rx is meant to be called from interrupts because it doesn't wake
up ksoftirqd. For calling from outside interrupts, netif_rx_ni exists.
This fixes plip to use netif_rx_ni. It fixes the infamous error "NOHZ:
local_softirq_panding 08" that happens on some machines with NOHZ and
plip --- it is caused by the fact that softirq is pending and ksoftirqd
is sleeping.
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 27 Nov 2007 03:25:23 +0000 (19:25 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
mmc: Avoid re-using minor numbers before the original device is closed.
tifm_sd: handle non-power-of-2 block sizes
mmc_block: check card state after write
Linus Torvalds [Tue, 27 Nov 2007 03:20:37 +0000 (19:20 -0800)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] Fix check after use error in ACL code
[CIFS] Fix potential data corruption when writing out cached dirty pages
[CIFS] Fix spurious reconnect on 2nd peek from read of SMB length
[CIFS] remove build warning
[CIFS] Have CIFS_SessSetup build correct SPNEGO SessionSetup request
[CIFS] minor checkpatch cleanup
[CIFS] have cifs_get_spnego_key get the hostname from TCP_Server_Info
[CIFS] add hostname field to TCP_Server_Info struct
[CIFS] clean up error handling in cifs_mount
[CIFS] add ver= prefix to upcall format version
[CIFS] Fix buffer overflow if server sends corrupt response to small
Andreas Herrmann [Mon, 19 Nov 2007 08:28:22 +0000 (09:28 +0100)]
radeonfb: add chip definition for RV370 5b63
... which I've found on a Sapphire X550 (Silent).
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andreas Herrmann <aherrman@arcor.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 27 Nov 2007 03:18:22 +0000 (19:18 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (21 commits)
libata: bump transfer chunk size if it's odd
libata: Return proper ATA INT status in pata_bf54x driver
pata_ali: trim trailing whitespace (fix checkpatch complaints)
pata_isapnp: Polled devices
pata_hpt37x: Fix cable detect bug spotted by Sergei
pata_ali: Lots of problems still showing up with small ATAPI DMA
pata_ali: Add Mitac 8317 and derivatives
libata-core: List more documentation sources for reference
ata_piix: Invalid use of writel/readl with iomap
sata_sil24: fix sg table sizing
pata_jmicron: fix disabled port handling in jmicron_pre_reset()
pata_sil680: kill bogus reset code (take 2)
ata_piix: port enable for the first SATA controller of ICH8 is 0xf not 0x3
ata_piix: only enable the first port on apple macbook pro
ata_piix: reorganize controller IDs
pata_sis.c: Add Packard Bell EasyNote K5305 to laptops
libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs
libata: use ATA_HORKAGE_STUCK_ERR for ATAPI tape drives
libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
libata: remove unused functions
...
git.openpandora.org / pandora-kernel.git / log