From: Tom Rini <trini@konsulko.com>
Date: Wed, 4 Dec 2024 20:30:25 +0000 (-0600)
Subject: Merge patch series "Add OPP_LOW support for J7200"
X-Git-Tag: v2025.04-rc1~17^2~70
X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=fe76d868f72e483f71a59639c8aa8f658a313b5d;p=pandora-u-boot.git

Merge patch series "Add OPP_LOW support for J7200"

Aniket Limaye <a-limaye@ti.com> says:

This series adds OPP_LOW spec data in k3_avs driver and enables a config
option to select the OPP_LOW performance point.

J7200 SOC supports OPP_LOW and OPP_NOM as two Operating Performance
Points as per (7.5 Operating Performance Points) section in the
Datasheet [0].
- A72SS/MSMC at 2 GHz/1GHz operation must use OPP_NOM.
- A72SS/MSMC at 1 GHz/500 MHz operation can use OPP_NOM or OPP_LOW
  voltage (though OPP_LOW voltage is recommended to reduce power
  consumption).

The actual OPP voltage for the device is read from the efuse and
updated in k3_avs_probe().

The default j7200 devicetree and k3_avs driver set OPP_NOM spec
frequency and voltage.

In the board init file, if K3_OPP_LOW config is enabled, Check if
OPP_LOW AVS voltage read from efuse is valid and update frequency (A72
and MSMC) and voltage (VDD_CPU) as per the OPP_LOW spec.

[0]: https://www.ti.com/lit/gpn/dra821u  (J7200 Datasheet)

Test logs:
https://gist.github.com/aniket-l/328ad93ed60c2419ed7be9f85e6b6075
- With series applied on master and CONFIG_K3_OPP_LOW enabled in
  j7200_evm_r5_defconfig
- Logs shown with and without efuse register programmed for OPP_0
  (Errors out if OPP_0 not found, programs OPP_LOW spec if found)
- Voltage update verified using 'i2c md 0x4c 0xe' in u-boot
- Frequency update verified using 'k3conf clock dump' in linux

Link: https://lore.kernel.org/r/20241119003617.1871183-1-a-limaye@ti.com
---

fe76d868f72e483f71a59639c8aa8f658a313b5d