From: Michael Trimarchi <michael@amarulasolutions.com>
Date: Tue, 17 Sep 2019 06:10:42 +0000 (+0530)
Subject: rockchip: rk3288-tinker: Attach missing peripherals at SPL
X-Git-Tag: v2019.10-rc4~4^2~3
X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=f810ea6acbfae0b3e61a1083cfd0665cd92d40b8;p=pandora-u-boot.git

rockchip: rk3288-tinker: Attach missing peripherals at SPL

Tinker board needs to mux all the sdmmc gpio and
activate the regulator connected to bank 7. Remove
all the bank that are not in use and mark them as dm,spl
so-that it would initialize at SPL.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
---

diff --git a/arch/arm/dts/rk3288-tinker-u-boot.dtsi b/arch/arm/dts/rk3288-tinker-u-boot.dtsi
index 2efb309d6bd..f7f9d6dc721 100644
--- a/arch/arm/dts/rk3288-tinker-u-boot.dtsi
+++ b/arch/arm/dts/rk3288-tinker-u-boot.dtsi
@@ -13,20 +13,20 @@
 	u-boot,dm-pre-reloc;
 };
 
-&sdmmc {
+&uart2_xfer {
 	u-boot,dm-pre-reloc;
 };
 
-&emmc {
-	u-boot,dm-pre-reloc;
+&sdmmc {
+	u-boot,dm-spl;
 };
 
-&gpio3 {
-	u-boot,dm-pre-reloc;
+&gpio7 {
+	u-boot,dm-spl;
 };
 
-&gpio8 {
-	u-boot,dm-pre-reloc;
+&vcc_sd {
+	u-boot,dm-spl;
 };
 
 &pcfg_pull_none_drv_8ma {
@@ -37,10 +37,22 @@
 	u-boot,dm-spl;
 };
 
+&pcfg_pull_none {
+	u-boot,dm-spl;
+};
+
+&pcfg_pull_up {
+	u-boot,dm-spl;
+};
+
 &sdmmc_bus4 {
 	u-boot,dm-spl;
 };
 
+&sdmmc_cd {
+	u-boot,dm-spl;
+};
+
 &sdmmc_clk {
 	u-boot,dm-spl;
 };
diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig
index 359be078acf..afee09819d1 100644
--- a/configs/tinker-rk3288_defconfig
+++ b/configs/tinker-rk3288_defconfig
@@ -49,7 +49,10 @@ CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_POWER_SUPPORT=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_MMC_DW=y
@@ -64,7 +67,9 @@ CONFIG_SPL_PINCTRL=y
 CONFIG_DM_PMIC=y
 CONFIG_PMIC_RK8XX=y
 CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_SPL_DM_REGULATOR=y
 CONFIG_REGULATOR_RK8XX=y
+CONFIG_SPL_DM_REGULATOR_FIXED=y
 CONFIG_PWM_ROCKCHIP=y
 CONFIG_RAM=y
 CONFIG_SPL_RAM=y