From: Michal Simek <michal.simek@amd.com>
Date: Mon, 12 Dec 2022 14:06:13 +0000 (+0100)
Subject: arm64: zynqmp: Remove unused USB DT properties
X-Git-Tag: v2023.04-rc1~5^2~31
X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=ef440787dab9998cf07278e1940bdf750a12d5f8;p=pandora-u-boot.git

arm64: zynqmp: Remove unused USB DT properties

xlnx,usb-polarity, xlnx,usb-reset-mode and snps,mask_phy_reset are not
documented in dt binding and also there is no code associated with them
that's why remove them.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/369139fafa1745252ef687e31aebf6bcc2080a32.1670853972.git.michal.simek@amd.com
---

diff --git a/arch/arm/dts/zynqmp-dlc21-revA.dts b/arch/arm/dts/zynqmp-dlc21-revA.dts
index 0461219ca3e..bf0d89a5fcb 100644
--- a/arch/arm/dts/zynqmp-dlc21-revA.dts
+++ b/arch/arm/dts/zynqmp-dlc21-revA.dts
@@ -154,8 +154,6 @@
 
 &usb0 {
 	status = "okay";
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 };
 
 &dwc3_0 {
@@ -170,8 +168,6 @@
 
 &usb1 {
 	status = "disabled"; /* Any unknown issue with USB-C */
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 };
 
 &dwc3_1 {
diff --git a/arch/arm/dts/zynqmp-g-a2197-00-revA.dts b/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
index e00428351cb..02d2427809d 100644
--- a/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
+++ b/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
@@ -303,8 +303,6 @@
 
 &usb0 { /* USB0 MIO52-63 */
 	status = "okay";
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 };
 
 &dwc3_0 {
diff --git a/arch/arm/dts/zynqmp-m-a2197-01-revA.dts b/arch/arm/dts/zynqmp-m-a2197-01-revA.dts
index 1fa023ffb13..2d7fe592c8f 100644
--- a/arch/arm/dts/zynqmp-m-a2197-01-revA.dts
+++ b/arch/arm/dts/zynqmp-m-a2197-01-revA.dts
@@ -461,8 +461,6 @@
 
 &usb0 {
 	status = "okay";
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 };
 
 &dwc3_0 {
@@ -474,8 +472,6 @@
 
 &usb1 {
 	status = "disabled"; /* not at mem board */
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 };
 
 &dwc3_1 {
diff --git a/arch/arm/dts/zynqmp-m-a2197-02-revA.dts b/arch/arm/dts/zynqmp-m-a2197-02-revA.dts
index 2271a6a4906..e46748d32c0 100644
--- a/arch/arm/dts/zynqmp-m-a2197-02-revA.dts
+++ b/arch/arm/dts/zynqmp-m-a2197-02-revA.dts
@@ -463,8 +463,6 @@
 
 &usb0 {
 	status = "okay";
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 };
 
 &dwc3_0 {
@@ -476,8 +474,6 @@
 
 &usb1 {
 	status = "disabled"; /* not at mem board */
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 };
 
 &dwc3_1 {
diff --git a/arch/arm/dts/zynqmp-m-a2197-03-revA.dts b/arch/arm/dts/zynqmp-m-a2197-03-revA.dts
index a89046a818f..f564817e2c8 100644
--- a/arch/arm/dts/zynqmp-m-a2197-03-revA.dts
+++ b/arch/arm/dts/zynqmp-m-a2197-03-revA.dts
@@ -457,8 +457,6 @@
 
 &usb0 {
 	status = "okay";
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 };
 
 &dwc3_0 {
@@ -470,8 +468,6 @@
 
 &usb1 {
 	status = "disabled"; /* not at mem board */
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 };
 
 &dwc3_1 {
diff --git a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
index b3fe42faeee..d63deb83e3c 100644
--- a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
+++ b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
@@ -543,8 +543,6 @@
 
 &usb0 {
 	status = "okay";
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 	phy-names = "usb3-phy";
 	phys = <&psgtr 1 PHY_TYPE_USB3 0 1>;
 };
@@ -559,8 +557,6 @@
 
 &usb1 {
 	status = "okay";
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 };
 
 &dwc3_1 {