From: Anshul Dalal <anshuld@ti.com>
Date: Fri, 17 Oct 2025 13:15:24 +0000 (+0530)
Subject: mach-k3: use custom enable_cache
X-Git-Tag: v2026.01-rc1~11^2~9
X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=e55e57d240e0bdef604efca5b386978b1c70d513;p=pandora-u-boot.git

mach-k3: use custom enable_cache

U-Boot's provided enable_caches enforces the following sequence:
icache_enable -> mmu_setup (as part of dcache_enable) -> dcache_enable

Whereas for K3 devices, we would like to add entries to the provided
static array (k3_mem_map) as per gd->bd->bi_dram and then call mmu_setup
to configure the MMU but also create carveouts for TFA/TEE before we
enable caches to prevent speculative accesses to the region. Thus the
following desired sequence:

add dram banks -> mmu_setup -> carveout TFA/TEE -> icache/dcache enable

Therefore this patch adds K3's own implementation of enable_cache for
ARM64, allowing for greater control over the cache enablement sequence.

Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
---

diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c
index 5483ac9906c..7f2a4e6260e 100644
--- a/arch/arm/mach-k3/common.c
+++ b/arch/arm/mach-k3/common.c
@@ -258,6 +258,12 @@ void board_prep_linux(struct bootm_headers *images)
 				 ROUND(images->os.end,
 				       CONFIG_SYS_CACHELINE_SIZE));
 }
+
+void enable_caches(void)
+{
+	icache_enable();
+	dcache_enable();
+}
 #endif
 
 void spl_enable_cache(void)