From: Ivan T. Ivanov <iivanov@mm-sol.com>
Date: Thu, 5 Feb 2015 17:12:56 +0000 (+0200)
Subject: thermal: Add QPNP PMIC temperature alarm driver
X-Git-Tag: omap-for-v4.2/fixes-rc1^2~112^2^2^2~23
X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=c610afaa21d3c6e7b02040c8563ffc01c7fc0570;p=pandora-kernel.git

thermal: Add QPNP PMIC temperature alarm driver

Add support for the temperature alarm peripheral found inside
Qualcomm plug-and-play (QPNP) PMIC chips. The temperature alarm
peripheral outputs a pulse on an interrupt line whenever the
thermal over temperature stage value changes.

Register a thermal sensor. The temperature reported by this thermal
sensor device should reflect the actual PMIC die temperature if an
ADC is present on the given PMIC. If no ADC is present, then the
reported temperature should be estimated from the over temperature
stage value.

Cc: David Collins <collinsd@codeaurora.org>
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
---

diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
new file mode 100644
index 000000000000..290ec06fa33a
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
@@ -0,0 +1,57 @@
+Qualcomm QPNP PMIC Temperature Alarm
+
+QPNP temperature alarm peripherals are found inside of Qualcomm PMIC chips
+that utilize the Qualcomm SPMI implementation. These peripherals provide an
+interrupt signal and status register to identify high PMIC die temperature.
+
+Required properties:
+- compatible:      Should contain "qcom,spmi-temp-alarm".
+- reg:             Specifies the SPMI address and length of the controller's
+                   registers.
+- interrupts:      PMIC temperature alarm interrupt.
+- #thermal-sensor-cells: Should be 0. See thermal.txt for a description.
+
+Optional properties:
+- io-channels:     Should contain IIO channel specifier for the ADC channel,
+                   which report chip die temperature.
+- io-channel-names: Should contain "thermal".
+
+Example:
+
+	pm8941_temp: thermal-alarm@2400 {
+		compatible = "qcom,spmi-temp-alarm";
+		reg = <0x2400 0x100>;
+		interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+		#thermal-sensor-cells = <0>;
+
+		io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
+		io-channel-names = "thermal";
+	};
+
+	thermal-zones {
+		pm8941 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&pm8941_temp>;
+
+			trips {
+				passive {
+					temperature = <1050000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				alert {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				crit {
+					temperature = <145000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
Reading git-diff-tree failed