From: Nishanth Menon Date: Thu, 8 Jan 2015 18:05:03 +0000 (-0600) Subject: (gpio-fan): Add thermal control hooks X-Git-Tag: omap-for-v4.1/fixes-rc1~180^2~27 X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=b5cf88e46bad;p=pandora-kernel.git (gpio-fan): Add thermal control hooks Allow gpio-fan to be used as thermal cooling device for platforms that use GPIO maps to control fans. As part of this change, we make the shutdown and remove logic the same as well. Signed-off-by: Nishanth Menon Acked-by: Eduardo Valentin Signed-off-by: Guenter Roeck --- diff --git a/Documentation/devicetree/bindings/gpio/gpio-fan.txt b/Documentation/devicetree/bindings/gpio/gpio-fan.txt index f996d428f132..439a7430fc68 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-fan.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-fan.txt @@ -11,6 +11,9 @@ Optional properties: must have the RPM values in ascending order. - alarm-gpios: This pin going active indicates something is wrong with the fan, and a udev event will be fired. +- cooling-cells: If used as a cooling device, must be <2> + Also see: Documentation/devicetree/bindings/thermal/thermal.txt + min and max states are derived from the speed-map of the fan. Note: At least one the "gpios" or "alarm-gpios" properties must be set. @@ -25,3 +28,13 @@ Examples: 6000 2>; alarm-gpios = <&gpio1 15 1>; }; + gpio_fan_cool: gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio2 14 1 + &gpio2 13 1>; + gpio-fan,speed-map = <0 0>, + <3000 1>, + <6000 2>; + alarm-gpios = <&gpio2 15 1>; + #cooling-cells = <2>; /* min followed by max */ + }; Reading git-diff-tree failed