From: Ajaykumar Hotchandani Date: Mon, 12 Dec 2011 08:27:36 +0000 (+0530) Subject: PCI: Set device power state to PCI_D0 for device without native PM support X-Git-Tag: v3.2-rc7~46^2 X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=b51306c63449d7f06ffa689036ba49eb46e898b5;p=pandora-kernel.git PCI: Set device power state to PCI_D0 for device without native PM support During test of one IB card with guest VM, found that, msi is not initialized properly. It turns out __write_msi_msg will do nothing if device current_state is not PCI_D0. And, that pci device does not have pm_cap in guest VM. There is an error in setting of power state to PCI_D0 in pci_enable_device(), but error is not returned for this. Following is code flow: pci_enable_device() --> __pci_enable_device_flags() --> do_pci_enable_device() --> pci_set_power_state() --> __pci_start_power_transition() We have following condition inside __pci_start_power_transition(): if (platform_pci_power_manageable(dev)) { error = platform_pci_set_power_state(dev, state); if (!error) pci_update_current_state(dev, state); } else { error = -ENODEV; /* Fall back to PCI_D0 if native PM is not supported */ if (!dev->pm_cap) dev->current_state = PCI_D0; } Here, from platform_pci_set_power_state(), acpi_pci_set_power_state() is getting called and that is failing with ENODEV because of following condition: if (!handle || ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0",&tmp))) return -ENODEV; Because of that, pci_update_current_state() is not getting called. With this patch, if device power state can not be set via platform_pci_set_power_state and that device does not have native pm support, then PCI device power state will be set to PCI_D0. -v2: This also reverts 47e9037ac16637cd7f12b8790ea7ce6680e42168, as it's not needed after this change. Acked-by: "Rafael J. Wysocki" Signed-off-by: Ajaykumar Hotchandani Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- Reading git-diff-tree failed