From: Paul Kocialkowski <contact@paulk.fr>
Date: Tue, 5 Aug 2025 17:48:24 +0000 (+0200)
Subject: sunxi: pinecube: Enable EMAC and network support
X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=b26eea99b1a61a9216efc56c40ba1e27ab2ea8c6;p=pandora-u-boot.git

sunxi: pinecube: Enable EMAC and network support

The pinecube has an ethernet connector which uses the EMAC and internal
PHY of the chip. Enable it in the config.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
---

diff --git a/configs/pinecube_defconfig b/configs/pinecube_defconfig
index de092424611..5c81ced4956 100644
--- a/configs/pinecube_defconfig
+++ b/configs/pinecube_defconfig
@@ -9,13 +9,13 @@ CONFIG_DRAM_ODT_EN=y
 CONFIG_I2C0_ENABLE=y
 # CONFIG_HAS_ARMV7_SECURE_BASE is not set
 CONFIG_SPL_I2C=y
-CONFIG_NO_NET=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f
 CONFIG_SYS_I2C_SPEED=400000
 CONFIG_MTD=y
 CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SUN8I_EMAC=y
 CONFIG_AXP209_POWER=y
 CONFIG_AXP_DCDC2_VOLT=1250
 CONFIG_AXP_DCDC3_VOLT=3300