From: Arik Nemtsov Date: Wed, 2 Oct 2013 13:58:09 +0000 (+0300) Subject: iwlwifi: add very first D0i3 support X-Git-Tag: v3.15-rc1~113^2~289^2^2~102^2~32 X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=98ee7783062335984f5979cea6a08e79982a4061;p=pandora-kernel.git iwlwifi: add very first D0i3 support When the bus is in D0i3, we can't send regular commands to the firmware. This means that we need to add a state to remember what is our d0i3 state and make sure that only d0i3 exit commands can be sent. Add flags to CMD_ flags and transport status for this purpose. Commands with CMD_HIGH_PRIO set are queued at the head of the command queue, behind other high priority commands. Commands with CMD_SEND_IN_IDLE set can be sent while the transport is idle (without taking rpm reference). Commands with CMD_MAKE_TRANS_IDLE set indicate that command completion should mark the transport as idle (and release the bus). Commands with CMD_WAKE_UP_TRANS set instruct the transport to exit from idle when this command is completed. The transport is marked as idle (STATUS_TRANS_IDLE) when the FW enters D0i3 state. This bit is cleared when it enters D0 state again. Process only commands with CMD_SEND_IN_IDLE flag while the transport is idle. Other enqueued commands will be processed only later, right after exiting D0i3. Signed-off-by: Arik Nemtsov Signed-off-by: Eliad Peller Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- Reading git-diff-tree failed