From: Peter Ujfalusi Date: Thu, 16 Aug 2012 13:41:04 +0000 (+0300) Subject: ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code X-Git-Tag: v3.7-rc1~81^2~14^2~128^2~5 X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=8fef6263ea68f6160637f370a5864d0a455c620d;p=pandora-kernel.git ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code Remove the feature to configure the CLKR/FSR mux on McBSP port with 6pin configuration. When moving to devicetree these callback can no longer be used in a clean way anymore. If a board require to change the 6pin port to work in 4pin setup it needs to set up the mux in the board file. For OMAP2/3: u32 devconf0; /* McBSP1 CLKR/FSR signal to be connected to CLKX/FSX pin */ devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); devconf0 |= OMAP2_MCBSP1_CLKR_MASK | OMAP2_MCBSP1_FSR_MASK; omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0); For OMAP4: u32 mcbsp_pad; /* McBSP4 CLKR/FSR signal to be connected to CLKX/FSX pin */ mcbsp_pad = omap4_ctrl_pad_readl(OMAP2_CONTROL_DEVCONF0); mcbsp_pad |= ((1 << 31) | (1 << 30)); omap4_ctrl_pad_writel(mcbsp_pad, OMAP2_CONTROL_DEVCONF0); In case when the kernel is booted with DT blob the pinctrl-single will be provided as soon as it is enabled on the platform. Signed-off-by: Peter Ujfalusi Acked-by: Jarkko Nikula Acked-by: Tony Lindgren Signed-off-by: Mark Brown --- Reading git-diff-tree failed