From: Tim Harvey Date: Mon, 1 Mar 2021 22:33:34 +0000 (-0800) Subject: imx: ventana: enable dm support for USB X-Git-Tag: v2021.07-rc1~30^2~41 X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=72c46327f03f61b8801f7e28463329b9f7231947;p=pandora-u-boot.git imx: ventana: enable dm support for USB Enable dm support for USB (which also requires dm support for fixed regulators used for vbus enable) and remove usb iomux which is no longer needed. We can remove the handling of otgpwr_en gpio as this is defined in dt as usbotg vbus-supply but we need to keep the handling of USB_HUB_RST# for boards that have a USB HUB as that isn't defined in the dt's currently. Signed-off-by: Tim Harvey --- diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c index 14f45bf07da..4627a156fef 100644 --- a/board/gateworks/gw_ventana/common.c +++ b/board/gateworks/gw_ventana/common.c @@ -970,7 +970,6 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { .rs485en = IMX_GPIO_NR(3, 24), .dioi2c_en = IMX_GPIO_NR(4, 5), .pcie_sson = IMX_GPIO_NR(1, 20), - .otgpwr_en = IMX_GPIO_NR(3, 22), .mmc_cd = IMX_GPIO_NR(7, 0), }, @@ -990,7 +989,6 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { .gps_shdn = IMX_GPIO_NR(1, 2), .vidin_en = IMX_GPIO_NR(5, 20), .wdis = IMX_GPIO_NR(7, 12), - .otgpwr_en = IMX_GPIO_NR(3, 22), .nand = true, }, @@ -1014,7 +1012,6 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { .wdis = IMX_GPIO_NR(7, 12), .msata_en = GP_MSATA_SEL, .rs232_en = GP_RS232_EN, - .otgpwr_en = IMX_GPIO_NR(3, 22), .vsel_pin = IMX_GPIO_NR(6, 14), .mmc_cd = IMX_GPIO_NR(7, 0), .nand = true, @@ -1039,7 +1036,6 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { .wdis = IMX_GPIO_NR(7, 12), .msata_en = GP_MSATA_SEL, .rs232_en = GP_RS232_EN, - .otgpwr_en = IMX_GPIO_NR(3, 22), .vsel_pin = IMX_GPIO_NR(6, 14), .mmc_cd = IMX_GPIO_NR(7, 0), .nand = true, @@ -1066,7 +1062,6 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { .wdis = IMX_GPIO_NR(5, 17), .msata_en = GP_MSATA_SEL, .rs232_en = GP_RS232_EN, - .otgpwr_en = IMX_GPIO_NR(3, 22), .vsel_pin = IMX_GPIO_NR(6, 14), .mmc_cd = IMX_GPIO_NR(7, 0), .nand = true, @@ -1117,7 +1112,6 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { .pcie_rst = IMX_GPIO_NR(1, 0), .vidin_en = IMX_GPIO_NR(5, 20), .wdis = IMX_GPIO_NR(7, 12), - .otgpwr_en = IMX_GPIO_NR(3, 22), .vsel_pin = IMX_GPIO_NR(6, 14), .mmc_cd = IMX_GPIO_NR(7, 0), .nand = true, @@ -1140,7 +1134,6 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { .rs232_en = GP_RS232_EN, .vidin_en = IMX_GPIO_NR(3, 31), .wdis = IMX_GPIO_NR(7, 12), - .otgpwr_en = IMX_GPIO_NR(4, 15), .mmc_cd = IMX_GPIO_NR(7, 0), }, @@ -1166,7 +1159,6 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { }, .pcie_rst = IMX_GPIO_NR(1, 0), .rs232_en = GP_RS232_EN, - .otgpwr_en = IMX_GPIO_NR(3, 23), .nand = true, }, @@ -1179,7 +1171,6 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { .leds = { IMX_GPIO_NR(6, 14), }, - .otgpwr_en = IMX_GPIO_NR(4, 15), .mmc_cd = IMX_GPIO_NR(6, 11), }, @@ -1197,7 +1188,6 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { .pcie_rst = IMX_GPIO_NR(1, 0), .mezz_pwren = IMX_GPIO_NR(2, 19), .mezz_irq = IMX_GPIO_NR(2, 18), - .otgpwr_en = IMX_GPIO_NR(3, 22), }, /* GW5905 */ @@ -1279,7 +1269,6 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { .pcie_rst = IMX_GPIO_NR(1, 0), .mezz_pwren = IMX_GPIO_NR(2, 19), .mezz_irq = IMX_GPIO_NR(2, 18), - .otgpwr_en = IMX_GPIO_NR(3, 22), }, }; @@ -1382,12 +1371,6 @@ void setup_iomux_gpio(int board, struct ventana_board_info *info) gpio_direction_output(gpio_cfg[board].wdis, 1); } - /* OTG power off */ - if (gpio_cfg[board].otgpwr_en) { - gpio_request(gpio_cfg[board].otgpwr_en, "usbotg_pwr"); - gpio_direction_output(gpio_cfg[board].otgpwr_en, 0); - } - /* sense vselect pin to see if we support uhs-i */ if (gpio_cfg[board].vsel_pin) { gpio_request(gpio_cfg[board].vsel_pin, "sd3_vselect"); diff --git a/board/gateworks/gw_ventana/common.h b/board/gateworks/gw_ventana/common.h index 5cec01c8382..d73850c5b90 100644 --- a/board/gateworks/gw_ventana/common.h +++ b/board/gateworks/gw_ventana/common.h @@ -75,7 +75,6 @@ struct ventana { int wdis; int msata_en; int rs232_en; - int otgpwr_en; int vsel_pin; int mmc_cd; /* various features */ diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 0fbbfb83463..50bb202a723 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -142,18 +142,14 @@ static void setup_iomux_enet(int gpio) } #ifdef CONFIG_USB_EHCI_MX6 -static iomux_v3_cfg_t const usb_pads[] = { - IOMUX_PADS(PAD_GPIO_1__USB_OTG_ID | DIO_PAD_CFG), - IOMUX_PADS(PAD_KEY_COL4__USB_OTG_OC | DIO_PAD_CFG), - /* OTG PWR */ - IOMUX_PADS(PAD_EIM_D22__GPIO3_IO22 | DIO_PAD_CFG), -}; - +/* toggle USB_HUB_RST# for boards that have it; it is not defined in dt */ int board_ehci_hcd_init(int port) { int gpio; - SETUP_IOMUX_PADS(usb_pads); + /* USB HUB is always on P1 */ + if (port == 0) + return 0; /* Reset USB HUB */ switch (board_type) { @@ -178,16 +174,6 @@ int board_ehci_hcd_init(int port) return 0; } - -int board_ehci_power(int port, int on) -{ - /* enable OTG VBUS */ - if (!port && board_type < GW_UNKNOWN) { - if (gpio_cfg[board_type].otgpwr_en) - gpio_set_value(gpio_cfg[board_type].otgpwr_en, on); - } - return 0; -} #endif /* CONFIG_USB_EHCI_MX6 */ #ifdef CONFIG_MXC_SPI diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig index 433de5ece3d..696f49ca8ae 100644 --- a/configs/gwventana_emmc_defconfig +++ b/configs/gwventana_emmc_defconfig @@ -89,12 +89,15 @@ CONFIG_MII=y CONFIG_PCI=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y CONFIG_CONS_INDEX=2 CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_DM_THERMAL=y CONFIG_IMX_THERMAL=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_STORAGE=y CONFIG_USB_KEYBOARD=y CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig index 4fd734e260e..0e697017b1f 100644 --- a/configs/gwventana_gw5904_defconfig +++ b/configs/gwventana_gw5904_defconfig @@ -93,12 +93,15 @@ CONFIG_MII=y CONFIG_PCI=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y CONFIG_CONS_INDEX=2 CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_DM_THERMAL=y CONFIG_IMX_THERMAL=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_STORAGE=y CONFIG_USB_KEYBOARD=y CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig index 5d8126e9771..9b204c72637 100644 --- a/configs/gwventana_nand_defconfig +++ b/configs/gwventana_nand_defconfig @@ -93,12 +93,15 @@ CONFIG_MII=y CONFIG_PCI=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y CONFIG_CONS_INDEX=2 CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_DM_THERMAL=y CONFIG_IMX_THERMAL=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_STORAGE=y CONFIG_USB_KEYBOARD=y CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 7c8abda1d26..1d68abda59b 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -100,7 +100,6 @@ #define CONFIG_ARP_TIMEOUT 200UL /* USB Configs */ -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0