From: Claudiu Manoil Date: Fri, 7 Mar 2014 12:42:46 +0000 (+0200) Subject: gianfar: Use Single-Queue polling for "fsl,etsec2" X-Git-Tag: v3.15-rc1~113^2~200^2 X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=71ff9e3df7e1c5d3293af6b595309124e8c97412;p=pandora-kernel.git gianfar: Use Single-Queue polling for "fsl,etsec2" For the "fsl,etsec2" compatible models the driver currently supports 8 Tx and Rx DMA rings (aka HW queues). However, there are only 2 pairs of Rx/Tx interrupt lines, as these controllers are integrated in low power SoCs with 2 CPUs at most. As a result, there are at most 2 NAPI instances that have to service multiple Tx and Rx queues for these devices. This complicates the NAPI polling routine having to iterate over the mutiple Rx/Tx queues hooked to the same interrupt lines. And there's also an overhead at HW level, as the controller needs to service all the 8 Tx rings in a round robin manner. The combined overhead shows up for multi parallel Tx flows transmitted by the kernel stack, when the driver usually starts returning NETDEV_TX_BUSY leading to NETDEV WATCHDOG Tx timeout triggering if the Tx path is congested for too long. As an alternative, this patch makes the driver support only one Tx/Rx DMA ring per NAPI instance (per interrupt group or pair of Tx/Rx interrupt lines) by default. The simplified single queue polling routine (gfar_poll_sq) will be the default napi poll routine for the etsec2 devices too. Some adjustments needed to be made to link the Tx/Rx HW queues with each NAPI instance (2 in this case). The gfar_poll_sq() is already successfully used by older SQ_SG_MODE (single interrupt group) controllers. This patch fixes Tx timeout triggering under heavy Tx traffic load (i.e. iperf -c -P 8) for the "fsl,etsec2" (currently the only MQ_MG_MODE devices). There's also a significant memory footprint reduction by supporting 2 Rx/Tx DMA rings (at most), instead of 8, for these devices. Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- Reading git-diff-tree failed