From: Nishanth Menon <nm@ti.com>
Date: Fri, 25 Apr 2025 17:31:12 +0000 (-0500)
Subject: arch: arm: dts: k3-am67a-beagley-ai-u-boot: Mark main_gpio1 as bootph-all
X-Git-Tag: v2025.07-rc2~38^2~7
X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=6f478ce788e9137ede4b085330d35ff91b919285;p=pandora-u-boot.git

arch: arm: dts: k3-am67a-beagley-ai-u-boot: Mark main_gpio1 as bootph-all

main_gpio1 controls the voltage for the SDcard from 3.3v to 1.8v.
This is required for proper operation of SDcard through various boot
stages.

Fixes the following seen in the boot log:
failed to set vqmmc-voltage to 3.3V

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
---

diff --git a/arch/arm/dts/k3-am67a-beagley-ai-u-boot.dtsi b/arch/arm/dts/k3-am67a-beagley-ai-u-boot.dtsi
index 6c52038cdca..6330ca93fc7 100644
--- a/arch/arm/dts/k3-am67a-beagley-ai-u-boot.dtsi
+++ b/arch/arm/dts/k3-am67a-beagley-ai-u-boot.dtsi
@@ -53,6 +53,10 @@
 	status = "disabled";
 };
 
+&main_gpio1 {
+	bootph-all;
+};
+
 #if IS_ENABLED(CONFIG_TARGET_J722S_R5_BEAGLEY_AI)
 
 &binman {