From: Anand Gadiyar Date: Mon, 8 Nov 2010 06:20:30 +0000 (-0600) Subject: usb: musb: fail unaligned DMA transfers on v1.8 and above X-Git-Tag: v2.6.37-rc2~23^2~12^2 X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=6e16edfe62eb49274c8a74dc04d1c6f315f8f82b;p=pandora-kernel.git usb: musb: fail unaligned DMA transfers on v1.8 and above The Inventra DMA engine in version 1.8 and later of the MUSB controller cannot handle DMA addresses that are not aligned to a 4 byte boundary. It ends up ignoring the last two bits programmed in the DMA_ADDR register. This is a deliberate design change in the controller and is documented in the programming guide. Earlier versions of the controller could handle these accesses just fine. Fail dma_channel_program if we see an unaligned address when using the newer controllers, so that the caller can carry out the transfer using PIO mode. (Current callers already have this backup path in place). Signed-off-by: Anand Gadiyar Tested-by: Ming Lei Cc: Ajay Kumar Gupta Cc: Mike Frysinger Signed-off-by: Felipe Balbi --- Reading git-diff-tree failed