From: Courtney Cavin Date: Sat, 21 Mar 2015 04:45:59 +0000 (-0700) Subject: Input: add Qualcomm PM8941 power key driver X-Git-Tag: omap-for-v4.1/fixes-rc1~145^2^2~27 X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=68c581d5e7d834d8e97534cafd60bd6716ee6fbc;p=pandora-kernel.git Input: add Qualcomm PM8941 power key driver Signed-off-by: Courtney Cavin Signed-off-by: Bjorn Andersson Tested-by: Ivan T. Ivanov Signed-off-by: Dmitry Torokhov --- diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt new file mode 100644 index 000000000000..07bf55f6e0b9 --- /dev/null +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt @@ -0,0 +1,43 @@ +Qualcomm PM8941 PMIC Power Key + +PROPERTIES + +- compatible: + Usage: required + Value type: + Definition: must be one of: + "qcom,pm8941-pwrkey" + +- reg: + Usage: required + Value type: + Definition: base address of registers for block + +- interrupts: + Usage: required + Value type: + Definition: key change interrupt; The format of the specifier is + defined by the binding document describing the node's + interrupt parent. + +- debounce: + Usage: optional + Value type: + Definition: time in microseconds that key must be pressed or released + for state change interrupt to trigger. + +- bias-pull-up: + Usage: optional + Value type: + Definition: presence of this property indicates that the KPDPWR_N pin + should be configured for pull up. + +EXAMPLE + + pwrkey@800 { + compatible = "qcom,pm8941-pwrkey"; + reg = <0x800>; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + }; Reading git-diff-tree failed