From: Jonas Karlman Date: Tue, 5 Nov 2024 21:51:46 +0000 (+0000) Subject: rockchip: rk3288-miqi: Fix slow Ethernet initializion X-Git-Tag: v2025.04-rc1~66^2~49 X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=61f4e5f9cfa77d0b4f8fd69f6e7c3fd4cc5b519c;p=pandora-u-boot.git rockchip: rk3288-miqi: Fix slow Ethernet initializion For some reason the Ethernet PHY reset delay is set to 1 second, this cause an unneccecery long boot delay. MiQi use RTL8211 Ethernet PHY, datasheet list an initial 10ms delay and then a 30-76ms delay before accessing registers. Change to use 80ms delay instead of a full second to speed up Ethernet initializion in U-Boot. Also enable PHY_REALTEK, DM_ETH_PHY and PHY_GIGE to improve Ethernet PHY support in U-Boot. Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang --- diff --git a/arch/arm/dts/rk3288-miqi-u-boot.dtsi b/arch/arm/dts/rk3288-miqi-u-boot.dtsi index 4361b35d6c8..e5c7e761c46 100644 --- a/arch/arm/dts/rk3288-miqi-u-boot.dtsi +++ b/arch/arm/dts/rk3288-miqi-u-boot.dtsi @@ -41,6 +41,10 @@ bootph-some-ram; }; +&gmac { + snps,reset-delays-us = <0 10000 80000>; +}; + &gpio7 { /delete-property/ bootph-all; bootph-pre-ram; diff --git a/configs/miqi-rk3288_defconfig b/configs/miqi-rk3288_defconfig index ee991714973..55e8d30f675 100644 --- a/configs/miqi-rk3288_defconfig +++ b/configs/miqi-rk3288_defconfig @@ -55,6 +55,9 @@ CONFIG_MISC=y CONFIG_ROCKCHIP_EFUSE=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH_PHY=y +CONFIG_PHY_GIGE=y CONFIG_ETH_DESIGNWARE=y CONFIG_GMAC_ROCKCHIP=y CONFIG_PINCTRL=y