From: Bryan Brattlof Date: Thu, 12 Jun 2025 11:38:50 +0000 (-0500) Subject: binman: alphabetize missing-blob entries X-Git-Tag: v2025.10-rc1~91^2~33^2~4 X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=562dcc6240fdb9b21e0e3b8da0a8452906e31aad;p=pandora-u-boot.git binman: alphabetize missing-blob entries As the list of entries grows let's alphabetize the list to make searching a little easier. No functional changes intended Reviewed-by: Anshul Dalal Signed-off-by: Bryan Brattlof --- diff --git a/tools/binman/missing-blob-help b/tools/binman/missing-blob-help index ab0023eb9fb..b73b16f1849 100644 --- a/tools/binman/missing-blob-help +++ b/tools/binman/missing-blob-help @@ -14,15 +14,6 @@ atf-bl31-sunxi: Please read the section on ARM Trusted Firmware (ATF) in board/sunxi/README.sunxi64 -scp-sunxi: -SCP firmware is required for system suspend, but is otherwise optional. -Please read the section on SCP firmware in board/sunxi/README.sunxi64 - -iot2050-seboot: -See the documentation for IOT2050 board. Your image is missing SEBoot -which is mandatory for board startup. Prebuilt SEBoot located at -meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/seboot_pg*.bin. - iot2050-otpcmd: See the documentation for IOT2050 board. Your image is missing OTP command data block which is used for provisioning the customer keys to the board. @@ -31,22 +22,31 @@ meta-iot2050/tree/master/recipes-bsp/secure-boot-otp-provisioning/files/make-otp for how to generate this binary. If you are not using secure boot or do not intend to provision the keys, disable CONFIG_IOT2050_EMBED_OTPCMD. +iot2050-seboot: +See the documentation for IOT2050 board. Your image is missing SEBoot +which is mandatory for board startup. Prebuilt SEBoot located at +meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/seboot_pg*.bin. + k3-rti-wdt-firmware: If CONFIG_WDT_K3_RTI_LOAD_FW is enabled, a firmware image is needed for the R5F core(s) to trigger the system reset. One possible source is https://github.com/siemens/k3-rti-wdt. +opensbi: +See the documentation for your board. The OpenSBI git repo is at +https://github.com/riscv/opensbi.git +You may need to build fw_dynamic.bin first and re-build u-boot with +OPENSBI=/path/to/fw_dynamic.bin + rockchip-tpl: An external TPL is required to initialize DRAM. Get the external TPL binary and build with ROCKCHIP_TPL=/path/to/ddr.bin. One possible source for the external TPL binary is https://github.com/rockchip-linux/rkbin. +scp-sunxi: +SCP firmware is required for system suspend, but is otherwise optional. +Please read the section on SCP firmware in board/sunxi/README.sunxi64 + tee-os: See the documentation for your board. You may need to build Open Portable Trusted Execution Environment (OP-TEE) and build with TEE=/path/to/tee.bin - -opensbi: -See the documentation for your board. The OpenSBI git repo is at -https://github.com/riscv/opensbi.git -You may need to build fw_dynamic.bin first and re-build u-boot with -OPENSBI=/path/to/fw_dynamic.bin