From: Adam Ford Date: Tue, 25 Mar 2025 02:54:45 +0000 (-0500) Subject: cpu: imx8_cpu: Print Speed grade if IMX_TMU X-Git-Tag: v2025.07-rc1~18^2~15^2~3 X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=4edfe1bbc4007659cfaed46372c6e31f1a9d6d79;p=pandora-u-boot.git cpu: imx8_cpu: Print Speed grade if IMX_TMU Much of the data that is display by imx8_cpu.c is also displayed from arch/arm/mach-imx/cpu.c, except the temperature grade and active temperature are only displayed when SoC is an i.MX9. Since IMX9 now implies IMX_TMU, change this to check for IMX_TMU in the same way it's done in mach-imx/cpu.c to enable displaying this information for any SoC with either of this config enabled. Since additional text may appear due to this commit, remove the extra space in the message displaying the temperature grade. Before: CPU: NXP i.MX8MP Rev1.1 A53 at 1200 MHz Model: Beacon EmbeddedWorks i.MX8MPlus Development kit After: CPU: NXP i.MX8MP Rev1.1 A53 at 1200 MHz CPU: Industrial temperature grade (-40C to 105C) at 28C Model: Beacon EmbeddedWorks i.MX8MPlus Development kit Signed-off-by: Adam Ford Reviewed-by: Marek Vasut --- diff --git a/drivers/cpu/imx8_cpu.c b/drivers/cpu/imx8_cpu.c index 39b3c194131..4e1eccaa5b0 100644 --- a/drivers/cpu/imx8_cpu.c +++ b/drivers/cpu/imx8_cpu.c @@ -215,19 +215,19 @@ static int cpu_imx_get_desc(const struct udevice *dev, char *buf, int size) ret = snprintf(buf, size, "NXP i.MX%s Rev%s %s at %u MHz", plat->type, plat->rev, plat->name, plat->freq_mhz); - if (IS_ENABLED(CONFIG_IMX9)) { + if (IS_ENABLED(CONFIG_IMX_TMU)) { switch (get_cpu_temp_grade(&minc, &maxc)) { case TEMP_AUTOMOTIVE: - grade = "Automotive temperature grade "; + grade = "Automotive temperature grade"; break; case TEMP_INDUSTRIAL: - grade = "Industrial temperature grade "; + grade = "Industrial temperature grade"; break; case TEMP_EXTCOMMERCIAL: - grade = "Extended Consumer temperature grade "; + grade = "Extended Consumer temperature grade"; break; default: - grade = "Consumer temperature grade "; + grade = "Consumer temperature grade"; break; }