From: Boris BREZILLON Date: Wed, 28 Aug 2013 11:03:39 +0000 (+0200) Subject: ARM: at91/dt: add ethernet phy to at91rm9200ek board X-Git-Tag: drivers-for-linus~14^2~19 X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=44fa054e08434623fe413cb043f6cd88191ded9e;p=pandora-kernel.git ARM: at91/dt: add ethernet phy to at91rm9200ek board Add ethernet phy node in at91rm9200ek.dts. The reg register is not specified, as it may differ depending on the init process of the board: ADDR0/1 phy pins are connected to PA13/14 rm9200 pins. Which means the phy will take its address from these pins during the reset process. The macb driver will launch a full scan on the mdio bus to discover the phy address. Signed-off-by: Boris BREZILLON [nicolas.ferre@atmel.com: changed to IRQ_TYPE_EDGE_BOTH as asked by Boris] Signed-off-by: Nicolas Ferre --- Reading git-diff-tree failed