From: Nathan Barrett-Morrison Date: Wed, 26 Feb 2025 17:30:26 +0000 (-0500) Subject: gpio: Add support for ADI ADP5588 GPIO expander chips X-Git-Tag: v2025.07-rc1~18^2~53^2~8 X-Git-Url: http://git.openpandora.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=446179627fcac2e99aaa329a1d6cf49805482c6b;p=pandora-u-boot.git gpio: Add support for ADI ADP5588 GPIO expander chips This adds support for the ADP588 GPIO expander from Analog Devices. It is accessed over I2C and provides up to 18 pins. It is largely a port of the Linux driver developed by Michael Hennerich Signed-off-by: Ian Roberts Signed-off-by: Greg Malysa Signed-off-by: Vasileios Bimpikas Signed-off-by: Utsav Agarwal Signed-off-by: Arturs Artamonovs Signed-off-by: Oliver Gaskell Signed-off-by: Nathan Barrett-Morrison --- diff --git a/MAINTAINERS b/MAINTAINERS index 5c16c8f6646..bfb81bb9891 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -632,6 +632,7 @@ F: doc/device-tree-bindings/clock/adi,sc5xx-clocks.yaml F: doc/device-tree-bindings/pinctrl/adi,adsp-pinctrl.yaml F: doc/device-tree-bindings/timer/adi,sc5xx-gptimer.yaml F: drivers/clk/adi/ +F: drivers/gpio/adp5588_gpio.c F: drivers/gpio/gpio-adi-adsp.c F: drivers/pinctrl/pinctrl-adi-adsp.c F: drivers/serial/serial_adi_uart4.c diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 00b01f5f09e..8d7a990b04f 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -554,6 +554,14 @@ config DM_PCA953X Now, max 24 bits chips and PCA953X compatible chips are supported +config ADP5588_GPIO + bool "ADP5588 GPIO expander driver" + depends on DM_GPIO && DM_I2C + help + Say yes here to support GPIO functionality of ADI ADP5588 chips. + + The ADP5588 is an 18-port I2C GPIO expander and keypad controller. + config SPL_DM_PCA953X bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports in SPL" depends on SPL_DM_GPIO diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index e25ede1813c..d426d3a2d7b 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -75,6 +75,7 @@ obj-$(CONFIG_NOMADIK_GPIO) += nmk_gpio.o obj-$(CONFIG_MAX7320_GPIO) += max7320_gpio.o obj-$(CONFIG_$(XPL_)MAX77663_GPIO) += max77663_gpio.o obj-$(CONFIG_SL28CPLD_GPIO) += sl28cpld-gpio.o +obj-$(CONFIG_ADP5588_GPIO) += adp5588_gpio.o obj-$(CONFIG_ZYNQMP_GPIO_MODEPIN) += zynqmp_gpio_modepin.o obj-$(CONFIG_SLG7XL45106_I2C_GPO) += gpio_slg7xl45106.o obj-$(CONFIG_FTGPIO010) += ftgpio010.o diff --git a/drivers/gpio/adp5588_gpio.c b/drivers/gpio/adp5588_gpio.c new file mode 100644 index 00000000000..d081e169897 --- /dev/null +++ b/drivers/gpio/adp5588_gpio.c @@ -0,0 +1,208 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * GPIO Chip driver for Analog Devices + * ADP5588/ADP5587 I/O Expander and QWERTY Keypad Controller + * + * (C) Copyright 2022 - Analog Devices, Inc. + * + * Written and/or maintained by Timesys Corporation + * + * Contact: Nathan Barrett-Morrison + * Contact: Greg Malysa + * + * Based on Michael Hennerich's Linux driver: + * Michael Hennerich + * + */ + +#include +#include +#include + +#define ADP5588_MAXGPIO 18 +#define ADP5588_BANK(offs) ((offs) >> 3) +#define ADP5588_BIT(offs) (1u << ((offs) & 0x7)) + +#define DEV_ID 0x00 /* Device ID */ +#define GPIO_DAT_STAT1 0x14 /* GPIO Data Status, Read twice to clear */ +#define GPIO_DAT_STAT2 0x15 /* GPIO Data Status, Read twice to clear */ +#define GPIO_DAT_STAT3 0x16 /* GPIO Data Status, Read twice to clear */ +#define GPIO_DAT_OUT1 0x17 /* GPIO DATA OUT */ +#define GPIO_DAT_OUT2 0x18 /* GPIO DATA OUT */ +#define GPIO_DAT_OUT3 0x19 /* GPIO DATA OUT */ +#define GPIO_INT_EN1 0x1A /* GPIO Interrupt Enable */ +#define GPIO_INT_EN2 0x1B /* GPIO Interrupt Enable */ +#define GPIO_INT_EN3 0x1C /* GPIO Interrupt Enable */ +#define KP_GPIO1 0x1D /* Keypad or GPIO Selection */ +#define KP_GPIO2 0x1E /* Keypad or GPIO Selection */ +#define KP_GPIO3 0x1F /* Keypad or GPIO Selection */ +#define GPIO_DIR1 0x23 /* GPIO Data Direction */ +#define GPIO_DIR2 0x24 /* GPIO Data Direction */ +#define GPIO_DIR3 0x25 /* GPIO Data Direction */ +#define GPIO_PULL1 0x2C /* GPIO Pull Disable */ +#define GPIO_PULL2 0x2D /* GPIO Pull Disable */ +#define GPIO_PULL3 0x2E /* GPIO Pull Disable */ +#define ID_MASK 0x0F + +struct adp5588_gpio { + u8 dat_out[3]; + u8 dir[3]; +}; + +static int adp5588_gpio_read(struct udevice *dev, u8 reg) +{ + int ret; + u8 val; + + ret = dm_i2c_read(dev, reg, &val, 1); + + if (ret < 0) { + pr_err("%s: read error\n", __func__); + return ret; + } + + return val; +} + +static int adp5588_gpio_write(struct udevice *dev, u8 reg, u8 val) +{ + int ret; + + ret = dm_i2c_write(dev, reg, &val, 1); + if (ret < 0) { + pr_err("%s: write error\n", __func__); + return ret; + } + + return 0; +} + +static int adp5588_get_value(struct udevice *dev, u32 offset) +{ + struct adp5588_gpio *plat = dev_get_plat(dev); + unsigned int bank = ADP5588_BANK(offset); + unsigned int bit = ADP5588_BIT(offset); + int val; + + if (plat->dir[bank] & bit) + val = plat->dat_out[bank]; + else + val = adp5588_gpio_read(dev, GPIO_DAT_STAT1 + bank); + + return !!(val & bit); +} + +static int adp5588_set_value(struct udevice *dev, u32 offset, + int32_t value) +{ + unsigned int bank, bit; + int ret; + struct adp5588_gpio *plat = dev_get_plat(dev); + + bank = ADP5588_BANK(offset); + bit = ADP5588_BIT(offset); + + if (value) + plat->dat_out[bank] |= bit; + else + plat->dat_out[bank] &= ~bit; + + ret = adp5588_gpio_write(dev, GPIO_DAT_OUT1 + bank, + plat->dat_out[bank]); + + return ret; +} + +static int adp5588_direction_input(struct udevice *dev, u32 offset) +{ + int ret; + unsigned int bank; + struct adp5588_gpio *plat = dev_get_plat(dev); + + bank = ADP5588_BANK(offset); + + plat->dir[bank] &= ~ADP5588_BIT(offset); + ret = adp5588_gpio_write(dev, GPIO_DIR1 + bank, plat->dir[bank]); + + return ret; +} + +static int adp5588_direction_output(struct udevice *dev, + u32 offset, int value) +{ + int ret; + unsigned int bank, bit; + struct adp5588_gpio *plat = dev_get_plat(dev); + + bank = ADP5588_BANK(offset); + bit = ADP5588_BIT(offset); + + plat->dir[bank] |= bit; + + if (value) + plat->dat_out[bank] |= bit; + else + plat->dat_out[bank] &= ~bit; + + ret = adp5588_gpio_write(dev, GPIO_DAT_OUT1 + bank, + plat->dat_out[bank]); + ret |= adp5588_gpio_write(dev, GPIO_DIR1 + bank, + plat->dir[bank]); + + return ret; +} + +static int adp5588_ofdata_platdata(struct udevice *dev) +{ + struct adp5588_gpio *plat = dev_get_plat(dev); + struct gpio_dev_priv *priv = dev_get_uclass_priv(dev); + int node = dev_of_offset(dev); + int ret, i, revid; + + priv->gpio_count = ADP5588_MAXGPIO; + priv->bank_name = fdt_get_name(gd->fdt_blob, node, NULL); + + ret = adp5588_gpio_read(dev, DEV_ID); + if (ret < 0) + return ret; + + revid = ret & ID_MASK; + + printf("ADP5588 Detected: Rev %x, Rev ID %x\n", ret, revid); + + for (i = 0, ret = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) { + plat->dat_out[i] = adp5588_gpio_read(dev, GPIO_DAT_OUT1 + i); + plat->dir[i] = adp5588_gpio_read(dev, GPIO_DIR1 + i); + ret |= adp5588_gpio_write(dev, KP_GPIO1 + i, 0); + ret |= adp5588_gpio_write(dev, GPIO_PULL1 + i, 0); + ret |= adp5588_gpio_write(dev, GPIO_INT_EN1 + i, 0); + if (ret) { + pr_err("%s: Initialization error\n", __func__); + return ret; + } + } + + return 0; +} + +static const struct dm_gpio_ops adp5588_ops = { + .direction_input = adp5588_direction_input, + .direction_output = adp5588_direction_output, + .get_value = adp5588_get_value, + .set_value = adp5588_set_value, +}; + +static const struct udevice_id adp5588_of_match_list[] = { + { .compatible = "adi,adp5588"}, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(gpio_adp5588) = { + .name = "gpio_adp5588", + .id = UCLASS_GPIO, + .ops = &adp5588_ops, + .of_match = adp5588_of_match_list, + .of_to_plat = adp5588_ofdata_platdata, + .plat_auto = sizeof(struct adp5588_gpio), + .flags = DM_FLAG_PRE_RELOC, +};